I got the command line and its working fine now.
Thanks
Also here is my posting on my oil submersion rig.
https://bitcointalksearch.org/topic/--7216
Topic: BAMT Running, but Says Not Config'ed (Read 1453 times)
Ok. I knew i didnt have that command linein there, so ill add it in an hour when i get back and see what it does.
As for submerged part, i was at a crossroad. I had my bfl units preordered but still several months wait. So i desided to get another rig going while i wait. But the one rig i have is loud and has fans blowing for cooling. I needed to put it in garage so its not taking up more room in house but a normal rig would invite bugs, mice, etc.
So i desided to do a project that i saw years ago and submerge the whole thing in mineral oil.
Its heavy as hell but very very quiet and cost some $$$. Downside is the radiator cant handle all the cards running at full power. But i have more radiators on the way.
Ill write up another post with pictures when i get home. Typeing this on phone is annoying to say least.
Thanks for advice.
As for submerged part, i was at a crossroad. I had my bfl units preordered but still several months wait. So i desided to get another rig going while i wait. But the one rig i have is loud and has fans blowing for cooling. I needed to put it in garage so its not taking up more room in house but a normal rig would invite bugs, mice, etc.
So i desided to do a project that i saw years ago and submerge the whole thing in mineral oil.
Its heavy as hell but very very quiet and cost some $$$. Downside is the radiator cant handle all the cards running at full power. But i have more radiators on the way.
Ill write up another post with pictures when i get home. Typeing this on phone is annoying to say least.
Thanks for advice.
iceweasel/web monitor will not show up if you dont do "do_bcast_status: 1" check out other commands for BAMT. http://bamter.org/redmine/projects/bamt/wiki/Examples
Where do u go to enter/change this setting cause its not in the bamt.conf file?
I do have pool monitoring set up but since i have this system submerged in oil, i need the temp monitoring at least till i can get the cooling set up to handle all the cards without the mobo resetting.
Thanks.
submerged in oil?
? do what? In BAMT config file, you will see a line like thisdo_monitor: 0 (look for this line)
do_bcast_status: 1 (add this to config file)
then run fixer, then restart. hollar back if you need more help.
iceweasel/web monitor will not show up if you dont do "do_bcast_status: 1" check out other commands for BAMT. http://bamter.org/redmine/projects/bamt/wiki/Examples
Where do u go to enter/change this setting cause its not in the bamt.conf file?
I do have pool monitoring set up but since i have this system submerged in oil, i need the temp monitoring at least till i can get the cooling set up to handle all the cards without the mobo resetting.
Thanks.
I have the same issue with one of the nodes. I believe it has to do with the monitoring scripts not understanding the APU, which don't report fan monitoring data... Decided not to fix it, as the unit is mining. Using my pools worker monitoring to check if the node is mining or not.
iceweasel/web monitor will not show up if you dont do "do_bcast_status: 1" check out other commands for BAMT. http://bamter.org/redmine/projects/bamt/wiki/Examples
I have BAMT running, but it seems that it keeps the "no GPU detected" screen up.
I am getting a full load off all the cards but cant use the web monitor nor does the BAMT home screen update with stats.
I have tried restarting the computer, changing the config, restarting the miner process, stopping and starting the miner process.
Is there a command or process to force a recheck?
Thanks in advance
-elrodvoss
I am getting a full load off all the cards but cant use the web monitor nor does the BAMT home screen update with stats.
I have tried restarting the computer, changing the config, restarting the miner process, stopping and starting the miner process.
Is there a command or process to force a recheck?
Thanks in advance
-elrodvoss
Jump to: