Topic: [BATCH] Simple to use NVIDIA GPUs Watcher/WatchDog (Read 347 times)
Nice one !!!
Very nice script. What do i have to change to do more rechecks before restarts?
Sometimes it's restarting a well working rig
Sometimes it's restarting a well working rig
Another BATCH file from me 
GPUs Watcher / WatchDog
The batch file monitors the load of NVIDIA graphics cards and restarts the system if one of the cards drops below the limit (default=75%, can be set). Its easy to use and beginner-friendly.
On start the watcher has an initialization phase and wait for writing the DAG file into cards memory.
Lets go... Download / README
Installation
- Nothing. Just start.
Settings
gpuLoadLimit: Reboot if the load of a single GPU drops below this value (%)
refreshInterval: Refresh interval in seconds
Preview: http://imgur.com/EWZXHwy
Have fun.
Donations are welcome
ETH: 0xBA3190c0e2B45c0441D7eB274D3105568085D99f
BTC: 1DjNKyaUMCPNcj5RKqzdPQgkw5TQQeuYuy
GPUs Watcher / WatchDog
The batch file monitors the load of NVIDIA graphics cards and restarts the system if one of the cards drops below the limit (default=75%, can be set). Its easy to use and beginner-friendly.
On start the watcher has an initialization phase and wait for writing the DAG file into cards memory.
Lets go... Download / README
Installation
- Nothing. Just start.
Settings
gpuLoadLimit: Reboot if the load of a single GPU drops below this value (%)
refreshInterval: Refresh interval in seconds
Preview: http://imgur.com/EWZXHwy
Have fun.
Donations are welcome
ETH: 0xBA3190c0e2B45c0441D7eB274D3105568085D99f
BTC: 1DjNKyaUMCPNcj5RKqzdPQgkw5TQQeuYuy
Jump to: