Topic: best miner for GTX 1060 6GB and RX580 8GB? (Read 165 times)
Phoenix and NBminer are the best for rx570 and 580 graphic cards and as for gtx1060 it can work accurately on any, if you are a newbie to all this NBMINER is a good choice and don't expect huge hashrate difference, getting 29mh to 32mh on rx580 is exactly what you'd get
Don't bother running two different miners at the same time, this could shrink your hashrate, since you are into Ethereum mining only I would recommend NBminer to you, very good miner for both Nvidia and AMD, I use RX580 and gtx1660 super in a rig with NBminer and I like the stable hashrate better than phoenix, I'm getting 31 MH on rx580 and 31.7MH on my gtx1660 supers
i have the cards in separate rigs as one is used for gaming sometimes.
Use PHX.
You`ll save load for 1 extra miner also.
Somme say, phoenix tells shit on speed.
Somme say TreX for NV and TRM for AMD.
Use PhoeniX
You`ll save load for 1 extra miner also.
Somme say, phoenix tells shit on speed.
Somme say TreX for NV and TRM for AMD.
Use PhoeniX
Phoenix is better than TeamRed for RX580.
oddly although Team Red is reporting a hash rate of 28 mhs the current hashrate is higher.
Excellent hashrate for GTX 1060 6GB 23.5 Mh
For RX580 8GB 29-31 Mh, an excellent hashrate, some miners get 33 Mh, but this is only on certain video cards, for example Sapphire with Samsung memory.
If you have such a hash rate, then I do not recommend doing anything.
For RX580 8GB 29-31 Mh, an excellent hashrate, some miners get 33 Mh, but this is only on certain video cards, for example Sapphire with Samsung memory.
If you have such a hash rate, then I do not recommend doing anything.
ive got these 2 cards running and was using Pheonix miner. but then i saw some articles saying it was better to use Gminer for the 1060 and Team Red for the RX580.
ive tried Gminer and im seeing 22.4mhs as opposed to 22.3 mhs.
but on Team Red my mhs has dropped from 29.8 to 28.
do i need to put some sort of switch in the bat file to optimize it for a Polaris card?
ive tried Gminer and im seeing 22.4mhs as opposed to 22.3 mhs.
but on Team Red my mhs has dropped from 29.8 to 28.
do i need to put some sort of switch in the bat file to optimize it for a Polaris card?
Jump to: