Topic: bfgminer not reading devices ;( (Read 5456 times)
yh i got a new hub thats recommended on the foums but still having the smae problem
quick question could it be the 10 port usb?
more than likely most 10 port hubs dont supply enough power to power more than 1 or 2 Miners have a look on the plug for the output raiting each miner uses 550ma to run smooth ir 0.5A
quick question could it be the 10 port usb?
You are going to be better off not burning electricity with those devices.. :/
Maybe stick one into your computer after installing drivers and let it mine for a day to say you did it.. but overall terrible waste of time and resources. :/
Maybe stick one into your computer after installing drivers and let it mine for a day to say you did it.. but overall terrible waste of time and resources. :/
hardware
raspberry pi model b+
powered 10 port usb hub
7 asic 333m/hash miners
2 arctic breaze usb fans
software
Raspbian-Debian Wheezy
bfgminer (currently)
hope that is what u needed
raspberry pi model b+
powered 10 port usb hub
7 asic 333m/hash miners
2 arctic breaze usb fans
software
Raspbian-Debian Wheezy
bfgminer (currently)
hope that is what u needed
What are your devices?
hi there i know this has been talked about lots of times and i been through them all but i cant find a solution im using a raspberry pi model b+ and i spent over 15 hours trying to get this to work i try countless fresh starts and i cant seem to find the problem at all i also try different setups and still nothing every time its just says that there are no devices found and i cant add them manually as they don't show up working and stay on standby (solid green) i know they work as i had them working on my computer just want to have them running 24/7 instead of 6 hours a day
any help is gratefully appreciated, also sorry if its in the wrong area.
any help is gratefully appreciated, also sorry if its in the wrong area.
Jump to: