I was thinking to do something like that wit 4 Typhoons http://www.scythe-eu.com/en/products/fans/gentle-typhoon-120-mm.html
thanks for your suggestion
Topic: BFL 60GH/s single cooling (Read 1212 times)
Pick up 4x of these http://www.newegg.com/Product/Product.aspx?Item=N82E16835608005
and do this..
Mine are running quieter then the psu was until I replaced that too. 60C.
and do this..
Mine are running quieter then the psu was until I replaced that too. 60C.
already make ROI 
they cost me $1250 each on September 5.
friend of mine sold them to me, it was an emergency and he needed a money ASAP.
so maybe you should be sorry for your ass
what kind of miners you have???
they cost me $1250 each on September 5.
friend of mine sold them to me, it was an emergency and he needed a money ASAP.
so maybe you should be sorry for your ass
what kind of miners you have???
Hello
Sorry for the answer but how much did you pay those?
I said sorry because you will never get your money back and you speak about making money :/
Are you mining for fun?
Sorry for the answer but how much did you pay those?
I said sorry because you will never get your money back and you speak about making money :/
Are you mining for fun?
i'm sorry if this was discussed. i tried to search but didn't find anything about it.
I have 2 BFL 60GH singles and I need advice about keeping it cool/optimal work.
one of the units was hashing at 59-60GH/s so I remove that side nets and now it is running 2-3 degrees cooler and stable over 60GH/s but hardware error has jumped from 0.8 to 1.3.
so what is optimal setup???
1. leave everything on
2. remove only nets on each side
3. remove nets and housing
4. remove housing but leave nets
5. ... something else?
btw noise is not a problem to me, it is sweet sound of "money making"
thanks guys
I have 2 BFL 60GH singles and I need advice about keeping it cool/optimal work.
one of the units was hashing at 59-60GH/s so I remove that side nets and now it is running 2-3 degrees cooler and stable over 60GH/s but hardware error has jumped from 0.8 to 1.3.
so what is optimal setup???
1. leave everything on
2. remove only nets on each side
3. remove nets and housing
4. remove housing but leave nets
5. ... something else?
btw noise is not a problem to me, it is sweet sound of "money making"
thanks guys
Jump to: