BFL single slacking | Bitcointalksearch.org

Epoch

legendary

Activity: 922

Merit: 1003

Quote from: tarrant_01 on May 02, 2012, 06:03:25 PM

I opened the case and found the large heatsink wasn't secure to the board. After securing it, my throttling issues disappeared....now the other two appear to be doing less work than it. Grin

Also Sonny mentioned an app coming out in 10 days that'll let you change the clock speed and firmware.

I've had 2 come in with loose heatsinks; one of the 2 plastic pins holding it down was popped out. Fortunately it is easy to fix; I guess shipping can be a bit rough.

The app you mentioned is EasyMiner. The link for it will be here:
http://www.butterflylabs.com/drivers/

tarrant_01

hero member

Activity: 546

Merit: 500

I opened the case and found the large heatsink wasn't secure to the board. After securing it, my throttling issues disappeared....now the other two appear to be doing less work than it. Grin

Also Sonny mentioned an app coming out in 10 days that'll let you change the clock speed and firmware.

tarrant_01

hero member

Activity: 546

Merit: 500

Quote from: Inaba on April 25, 2012, 11:24:32 AM

It's definitely throttling, but if your house is 68F, it should not be doing that. Send it to me for some tender loving care. I'll take care of your ill single and set it free when it's all better.

Sure! What's your address?

Inaba

legendary

Activity: 1260

Merit: 1000

It's definitely throttling, but if your house is 68F, it should not be doing that. Send it to me for some tender loving care. I'll take care of your ill single and set it free when it's all better.

tarrant_01

hero member

Activity: 546

Merit: 500

Yea, i understand about the throttling. Just reset cgminer again. It's 68F in my house. Not even 3 minutes running it's 10 shares behind and showing an average of 650Mh/s vs 826Mh/s for the others.

Emailing...

edit: Oh and temps for BFL's aren't displayed in 2.3.1-2. They were in 2.3.3 but there's the temp cutoff bug that makes them REST all the time.

Epoch

legendary

Activity: 922

Merit: 1003

Quote from: tarrant_01 on April 25, 2012, 08:21:56 AM

I recently got 3 BFL singles. One of them seems to be a slacker. I use cgminer 2.3.1 and two of them report an average Mh/s of ~810, while the slacker reports 629 Mh/s. This shows in the # of shares submitted. The normal ones are approaching 8000 and the slacker just hit 5400. The light flashes on this one quite often. To be fair, I live in southern Arizona and temps are in the high 90's already. Last night before I went to bed, I reset cgminer thinking it was just perhaps the day temps causing issues. Well all the number above came from that run over night. Should I send it back?

The blinking front LED means it is throttling due to overtemperature. What temperature is cgminer reporting for that Single?

As rjk pointed out, 90F ambient is pretty high. I'm running a bunch at 80F ambient without issue, but found they have around 10-15F headroom before throttling. So your observation does not surprise me from what I know of their characteristics.

But you did say it exhibits similar behavior when your house is at 70 ... that is not normal. You should contact BFL about a replacement.

tarrant_01

hero member

Activity: 546

Merit: 500

6 month warranty. I'll have to send them an email.

tarrant_01

hero member

Activity: 546

Merit: 500

Evaporative cooler through out the house and a portable A/C in my bedroom that I am not using yet.

My house was cooler than 70 last night so I'm pretty sure it's not the house temperature.

rjk

sr. member

Activity: 448

Merit: 250

1ngldh

Quote from: tarrant_01 on April 25, 2012, 08:21:56 AM

I recently got 3 BFL singles. One of them seems to be a slacker. I use cgminer 2.3.1 and two of them report an average Mh/s of ~810, while the slacker reports 629 Mh/s. This shows in the # of shares submitted. The normal ones are approaching 8000 and the slacker just hit 5400. The light flashes on this one quite often. To be fair, I live in southern Arizona and temps are in the high 90's already. Last night before I went to bed, I reset cgminer thinking it was just perhaps the day temps causing issues. Well all the number above came from that run over night. Should I send it back?

The recommended ambient temperature is 72 degrees, don't you have a location with air conditioning?

tarrant_01

hero member

Activity: 546

Merit: 500

I recently got 3 BFL singles. One of them seems to be a slacker. I use cgminer 2.3.1 and two of them report an average Mh/s of ~810, while the slacker reports 629 Mh/s. This shows in the # of shares submitted. The normal ones are approaching 8000 and the slacker just hit 5400. The light flashes on this one quite often. To be fair, I live in southern Arizona and temps are in the high 90's already. Last night before I went to bed, I reset cgminer thinking it was just perhaps the day temps causing issues. Well all the number above came from that run over night. Should I send it back?

Topic: BFL single slacking (Read 1428 times)