Topic: Bios Incorrectly Flashed ???? (Read 113 times)

Hey Guys Not sure where to put this

I have 4 cards 2xMSI RX 580's 8G GAMING X Samsung Mem and  1x Saffire RX570 8G Samsung Mem  1x Biostar RX 580 8G  Hynix mem.All the cards are runing perfectly and are not crashing or causing any errors.

BUT  ........ I am using SimpleMining which works like a dream and according to all comments and specs my clock timing and all BIOS settings are not well done. My  settings are as follows:


ETH - Total Speed: 120.818 Mh/s, Total Shares: 897, Rejected: 0, Time: 08:57
ETH: GPU0 29.405 Mh/s, GPU1 30.727 Mh/s, GPU2 30.343 Mh/s, GPU3 30.343 Mh/s
SC - Total Speed: 2053.900 Mh/s, Total Shares: 1150, Rejected: 1
SC: GPU0 499.881 Mh/s, GPU1 522.362 Mh/s, GPU2 515.832 Mh/s, GPU3 515.825 Mh/s
GPU0 t=48C fan=62%, GPU1 t=61C fan=100%, GPU2 t=54C fan=62%, GPU3 t=55C fan=62%
ETH: 01/26/18-21:26:59 - SHARE FOUND - (GPU 0)
ETH: Share accepted (246 ms)!
ETH: 01/26/18-21:27:00 - New job from europe.ethash-hub.miningpoolhub.com:17020
ETH - Total Speed: 120.541 Mh/s, Total Shares: 898, Rejected: 0, Time: 08:58
ETH: GPU0 29.356 Mh/s, GPU1 30.688 Mh/s, GPU2 30.270 Mh/s, GPU3 30.226 Mh/s
SC - Total Speed: 2049.189 Mh/s, Total Shares: 1150, Rejected: 1
SC: GPU0 499.056 Mh/s, GPU1 521.703 Mh/s, GPU2 514.581 Mh/s, GPU3 513.849 Mh/s

The only issue is when i show people my setting they all say OMFG. That way to high.

GPU0=Saffire  GPU1=Biostar   GPU 2+3 = MSI RX580 GAMING X

Core = 1240,1290,1300,1300
Mem=  2190,2190,2190,2190
undervolting = 900,900,900,900

I do not have to worry about electricity but would like to know whether these settings would leesen the life of my cards or even cause damge....bearing in mind the rig runs at good temps 24/7 no problem.
If i need to rectify this please could you guys post a link or 2 so that i could start moving in the right direction.

Regards and thx for any responses

JUPIE2008