Topic: BIOS modding doesn't work (Read 203 times)
Working using msdos. Thanks all!
Run MS DOS as administrator
backup (GPU0)
atiflash -s 0 biosoriginal.rom
flash (GPU0)
ATIWinflash -p 0 bios.rom
backup (GPU0)
atiflash -s 0 biosoriginal.rom
flash (GPU0)
ATIWinflash -p 0 bios.rom
Before this try to run, make sure you see some info there
atiflash -i 0
asrock or asus 570 
dont use atiWINflash, use only in cmd atiflash!!! you can always use \atiflash help 
dont use atiWINflash, use only in cmd atiflash!!! you can always use \atiflash help 
In tech powerup website you can find the Stock bios for any of the RX Series card. Your roms should not be 0 rather should be 256 kb. Get a stock bios from here https://www.techpowerup.com/vgabios/191598/asus-rx570-4096-170327
Do the same procedure as you have already done after trying to reinstall this stock Bios. If the problem persist, check your cards, as you may have unfortunately bricked the bios (much less likely I hope).
Do the same procedure as you have already done after trying to reinstall this stock Bios. If the problem persist, check your cards, as you may have unfortunately bricked the bios (much less likely I hope).
Try saving your original BIOS using GPU-Z and then try to mod it.
https://imgur.com/a/H9L3qKn
https://imgur.com/a/H9L3qKn
thats wierd.
take a look if your card have any jumper or switch on your card and be sure you are using lastest atiflash.
take a look if your card have any jumper or switch on your card and be sure you are using lastest atiflash.
No switch unfortunately. Tried different versions and even another card (RX570 4gb ASUS). Same issues.
thats wierd.
take a look if your card have any jumper or switch on your card and be sure you are using lastest atiflash.
take a look if your card have any jumper or switch on your card and be sure you are using lastest atiflash.
Thank you. Will try soon.
Another little fact: all roms that i save from atiflash are 0kb.
Another little fact: all roms that i save from atiflash are 0kb.
Run MS DOS as administrator
backup (GPU0)
atiflash -s 0 biosoriginal.rom
flash (GPU0)
ATIWinflash -p 0 bios.rom
backup (GPU0)
atiflash -s 0 biosoriginal.rom
flash (GPU0)
ATIWinflash -p 0 bios.rom
Use DOS version of atiwinflash, using comand -p and do not use -f this can damage your card.
Trying to BIOS mod a batch of new cards (asrock 570 8gb). Saved the original bios, so far so good. Then use the polaris one click bios mod and saved the modded which went also fine. However, when I tried to flash with ATIflash it says "error reading from ROM". Now naturally I just did the whole thing again, only find out my newly saved original roms cant be read by the polaris bios mod (error: This BIOS is non standard size. Flashing this BIOS may corrupt your graphics card) NOR I can flash the original in ATIflash (says error reading from ROM). With the card itself is nothing wrong, it still does fine at 28.3mhs, but this is the unmodded hashrate.
Anyone any idea?
Already did the following:
- Pixel patcher, reboot
- Clean install drivers
- Moved from riser to 16x slot
Anyone any idea?
Already did the following:
- Pixel patcher, reboot
- Clean install drivers
- Moved from riser to 16x slot
Jump to: