Thanks I am up and running almost I have 2 miners and the 2 board 100ghs is up and running but the other miner does not seem to have started it is this one
http://www.ebay.co.uk/itm/261392269459?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
is there something I am missing there is a green light on it but no start
Many Thanks for any help
Steve
Topic: BitBurner Fury Question (Read 918 times)
have not yet tried the double dash will do tonight but I have 3 boards 16 bitfury 2 at 100ghs and one at 42 ghs do i enter it like this 115200:96:10:50:256
Thanks for your help
Thanks for your help
Yes from the cgminer 3.4 readme:
eg:
--avalon-options 115200:24:10:45:282
The values are baud : miners : asic count : timeout : frequency.
Baud:
The device is pretty much hard coded to emulate 115200 baud so you shouldn't
change this.
Miners:
Most Avalons are 3 module devices, which come to 24 miners. 4 module devices
would use 32 here.
Asic count:
Virtually all have 10, so don't change this.
Timeout:
This is how long the device will work on a work item before accepting new work
to replace it. It should be changed according to the frequency (last setting).
It is possible to set this a little lower if you are trying to tune for short
block mining (eg p2pool) but much lower and the device will start creating
duplicate shares.
A value of 'd' means cgminer will calculate it for you based on the frequency
Sample settings for valid different frequencies (last 2 values):
34:375 *
36:350 *
39:325 *
43:300
45:282 (default)
47:270
50:256
Frequency:
This is the clock speed of the devices. Only specific values work, 256, 270,
282 (default), 300, 325, 350 and 375.
Note that setting a value with an asterisk next to it will be using your
avalon outside its spec and you do so at your own risk.
have not yet tried the double dash will do tonight but I have 3 boards 16 bitfury 2 at 100ghs and one at 42 ghs do i enter it like this 115200:96:10:50:256
Thanks for your help
Thanks for your help
--avalon-options Set avalon options baud:miners:asic:timeout:freq:tech
2 dashes?
2 dashes?
hello all
Still having a bit of trouble with these boards when I type this in sudo ./cgminer -o stratum+tcp://stratum.mining.eligius.st:3334 -u -p x –avalon-options 115200:32:10:50:256 –bitburner-voltage 1300
I get ./cgminer: -avalon-options: unrecognized option
any help thanks
Still having a bit of trouble with these boards when I type this in sudo ./cgminer -o stratum+tcp://stratum.mining.eligius.st:3334 -u
I get ./cgminer: -avalon-options: unrecognized option
any help thanks
Jump to: