Bitcoin Core generates wrong private key?

HCP

legendary

Activity: 2086

Merit: 4361

Quote from: ranochigo on February 18, 2021, 06:32:18 AM

If you have BIP38 encryption on your paper wallet with a passphrase, you'll have to go to Bitaddress or something similar for it to be decrypted into something starting with either 5, K or L. After which, you can import the private keys.

I recommending downloading the source code from here: https://github.com/pointbiz/bitaddress.org/releases. Choose the source code zip and extract it. You should see a html file and run it with your internet connection turned off.

If:
- you have an android device...
- AND your paper wallet is BIP38 encrypted...
- AND your paper wallet has a QRCodes...

Then, you can use Mycelium to easily scan the (encrypted) private key QRCode and it has BIP38 decryption built in... it will even "auto scan" the blockchain to determine if the paper wallet actually holds any funds.

ranochigo

legendary

Activity: 3038

Merit: 4418

Crypto Swap Exchange

Quote from: daniela1968 on February 18, 2021, 05:43:53 AM

Hi, i am sorry to side rail this but i think this is part of the solution to my problem. I have been have problems with Blockchain,com verification emails. I have some cold storage paper wallets that i was looking to import there but with all the problems i am leary about this. I have a new computer so am just downloading the newest bitcoin QT however need help please to import my private keys from the paper wallet one the core has fully loaded . Is this possible?
I see all your instructions above but am really not very tech savy , could you give me a little more detail to this please. thanks

If you have BIP38 encryption on your paper wallet with a passphrase, you'll have to go to Bitaddress or something similar for it to be decrypted into something starting with either 5, K or L. After which, you can import the private keys.

I recommending downloading the source code from here: https://github.com/pointbiz/bitaddress.org/releases. Choose the source code zip and extract it. You should see a html file and run it with your internet connection turned off.

LoyceV

legendary

Activity: 3290

Merit: 16489

Thick-Skinned Gang Leader and Golden Feather 2021

Quote from: daniela1968 on February 18, 2021, 05:43:53 AM

import my private keys from the paper wallet one the core has fully loaded . Is this possible?

That's possible: click Help > Debug window > type "importprivkey" followed by your private key.
Rescanning takes quite a while.

Quote

I see all your instructions above but am really not very tech savy

For paper wallets with QR-code, a mobile wallet such as Mycelium on Android is much easier.

However:

Quote

cold storage paper wallets

You're talking about cold storage. Depending on the value (and how much money you're risking) you may want to keep the private keys offline, which means none of the above, because all of it could put your funds at risk for malware.
Cold storage with offline signing isn't a non-tech-savy approach though.

After moving your Bitcoins, and only if your paper wallets are old enough, you may still have some Forkcoin value left on them. Don't throw them out yet.

daniela1968

newbie

Activity: 4

Merit: 2

Quote from: NotATether on February 16, 2021, 11:21:16 AM

Quote from: Questfor on February 16, 2021, 11:14:14 AM

4. Open console and dump priv key for that address

How are you exporting the private key? Did you run dumpprivkey YOUR_ADDRESS?

Can you try creating a new Bitcoin Core wallet, and then importing that private key into the new wallet using importprivkey, and see if the new wallet shows a different address?

Alternatively it's possible that in Electrum you pasted the private key without putting p2wpkh: in front of it. If you don't do that then you might generate an address starting with a "1" or "3" instead of native segwit's bc1.

Hi, i am sorry to side rail this but i think this is part of the solution to my problem. I have been have problems with Blockchain,com verification emails. I have some cold storage paper wallets that i was looking to import there but with all the problems i am leary about this. I have a new computer so am just downloading the newest bitcoin QT however need help please to import my private keys from the paper wallet one the core has fully loaded . Is this possible?
I see all your instructions above but am really not very tech savy , could you give me a little more detail to this please. thanks

HCP

legendary

Activity: 2086

Merit: 4361

Quote from: LoyceV on February 16, 2021, 12:02:00 PM

Quote from: Xynerise on April 24, 2018, 03:00:01 AM

For example

Code:

p2wpkh-p2sh:5BitcoinPrivateKey

This should generate the corresponding p2wpkh-p2sh bitcoin address.

For example

Code:

p2wpkh:5PrivateKey

This should generate the corresponding Bech32 address

Just a quick note... you should NOT be using WIF keys that start with a "5" for generating SegWit addresses... these are for "uncompressed" keys... and can cause a great deal of grief! Shocked

Only use WIF keys that start with a "K" or an "L" for SegWit. I would hope that any decent wallet would spit out an error and/or warning when trying to use "uncompressed" keys.

Quote

Bitaddress doesn't support Segwit, right?

No, it doesn't... you'd need to use https://segwitaddress.org/ (for Nested Segwit aka "3" type) and https://segwitaddress.org/bech32/ (for native segwit aka "bc1")

Questfor

newbie

Activity: 3

Merit: 5

Quote

For P2WPKH addresses (Bech32, starting with 'bc1')
This time we'll add p2wpkh: in front of the private key.
For example
Code:
p2wpkh:5PrivateKey

This actually worked. Thanks Shocked

I think I used p2wpkh-p2sh prefix previously. Still is very confusing for me but at least now I have confirmed that private key generated in offline and unsynced bitcoin core wallet can be imported to electrum

LoyceV

legendary

Activity: 3290

Merit: 16489

Thick-Skinned Gang Leader and Golden Feather 2021

Quote from: NotATether on February 16, 2021, 11:21:16 AM

Alternatively it's possible that in Electrum you pasted the private key without putting p2wpkh: in front of it. If you don't do that then you might generate an address starting with a "1" or "3" instead of native segwit's bc1.

Correct. Full version:

Quote from: Xynerise on April 24, 2018, 03:00:01 AM

For P2SH-P2WPKH addresses (Addresses starting with "3")
Just add p2wpkh-p2sh: directly in front of your private key.
For example

Code:

p2wpkh-p2sh:5BitcoinPrivateKey

This should generate the corresponding p2wpkh-p2sh bitcoin address.

For P2WPKH addresses (Bech32, starting with 'bc1')
This time we'll add p2wpkh: in front of the private key.
For example

Code:

p2wpkh:5PrivateKey

This should generate the corresponding Bech32 address

It's about time Electrum checks all possible address formats on it's own. I can never remember what to type.

Quote from: Questfor on February 16, 2021, 11:14:14 AM

6. When you enter that private key into bitadress.org it shows completely different public address and does not show the one you generated in bitcoin core (bc1***)

Bitaddress doesn't support Segwit, right?

Questfor

newbie

Activity: 3

Merit: 5

I used command
dumpprivkey bc1(recieve address I just generated)

I tried importing into electrum with prefix but no luck either. Just like I explained in point 6 when you paste that private key into bitaddress.org (offline version from github) you get many addresses but none even looks like recieve address generated in bitcoin core (bc1.....)
Same situation happens when you generate address with native segwit Bech32 unchecked.

Quote

Can you try creating a new Bitcoin Core wallet, and then importing that private key into the new wallet using importprivkey, and see if the new wallet shows a different address?

Just did that on fresh linux virtual machine.

Code:

importprivkey (...)
null

And nothing else happened.

NotATether

legendary

Activity: 1568

Merit: 6660

bitcoincleanup.com / bitmixlist.org

Quote from: Questfor on February 16, 2021, 11:14:14 AM

4. Open console and dump priv key for that address

How are you exporting the private key? Did you run dumpprivkey YOUR_ADDRESS?

Can you try creating a new Bitcoin Core wallet, and then importing that private key into the new wallet using importprivkey, and see if the new wallet shows a different address?

Alternatively it's possible that in Electrum you pasted the private key without putting p2wpkh: in front of it. If you don't do that then you might generate an address starting with a "1" or "3" instead of native segwit's bc1.

Questfor

newbie

Activity: 3

Merit: 5

I try to make this short, has anyone enounterd a problem where private key from bitcoin core gives different address with 0 balance when imported info electrum?

Steps to reproduce.
1. Install bitcoin core 0.21.0 on windows or linux
2. Cant sync because machine is offline
3. Create wallet and generate native segwit address to recieve coins (it starts with bc1***)
You can send some coins on that address and it can be searched on blockchain explorer
4. Open console and dump priv key for that address
5. When you try to import that key into Electrum the balance shows 0
6. When you enter that private key into bitadress.org it shows completely different public address and does not show the one you generated in bitcoin core (bc1***)

My question is, is it really a bug in 0.21.0 version, or maybe its not possible to move wallets like that?

Topic: Bitcoin Core generates wrong private key? (Read 240 times)