My 400GH/s Bitfury rig is not hashing after sudo reboot command
I had installed additional cooling today so edited the /run/shm/.stat.log file to increase all the chip speeds from 52 to 55, saved to /opt/bitfury/best.cnf and rebooted.
I have since changed all chip speeds back to 52, but still wont boot.
For about a week I had all 256 chips running at 55 until the AC in the room failed. The AC has been fixed so I wanted to get it back up to 55 again....
Output of /run/shm/.stat.log after reboot:
1 AIfDSo 52 0.000 0.000 0 0 0 0 0 $
2 AIfDSo 52 0.000 0.000 0 0 0 0 0 $
3 AIfDSo 52 0.000 0.000 0 0 0 0 0 $
Output of /run/shm/.stat.log after a few minutes following reboot:
1 AiFDso 52 0.000 0.000 0 0 0 0 0 $
2 AiFDso 52 0.000 0.000 0 0 0 0 0 $
3 AiFDso 52 0.000 0.000 0 0 0 0 0 $
As you can see, the autotune is turning off the chips.
Please help!
==========
extra output:
pi@0-6-249:~$ sudo /opt/bitfury/start-miner-console.sh
SPEED: min:52 def:52 max:53
M-Board version 2 detected
INIT: 256 chips detected
==========
I had installed additional cooling today so edited the /run/shm/.stat.log file to increase all the chip speeds from 52 to 55, saved to /opt/bitfury/best.cnf and rebooted.
I have since changed all chip speeds back to 52, but still wont boot.
For about a week I had all 256 chips running at 55 until the AC in the room failed. The AC has been fixed so I wanted to get it back up to 55 again....
Output of /run/shm/.stat.log after reboot:
1 AIfDSo 52 0.000 0.000 0 0 0 0 0 $
2 AIfDSo 52 0.000 0.000 0 0 0 0 0 $
3 AIfDSo 52 0.000 0.000 0 0 0 0 0 $
Output of /run/shm/.stat.log after a few minutes following reboot:
1 AiFDso 52 0.000 0.000 0 0 0 0 0 $
2 AiFDso 52 0.000 0.000 0 0 0 0 0 $
3 AiFDso 52 0.000 0.000 0 0 0 0 0 $
As you can see, the autotune is turning off the chips.
Please help!
==========
extra output:
pi@0-6-249:~$ sudo /opt/bitfury/start-miner-console.sh
SPEED: min:52 def:52 max:53
M-Board version 2 detected
INIT: 256 chips detected
==========
UPDATE: FIXED!!
After I ran the stop-stratumproxy.sh, start-stratumproxy.sh, stop-miner.sh and start-miner.sh scripts it started working. No idea what was wrong.