Bitfury b8 with Huawie power supply hash boards not hashing

HagssFIN

legendary

Activity: 2422

Merit: 1706

Electrical engineer. Mining since 2014.

Quote from: zoghotaa on December 23, 2021, 07:21:01 PM

Quote from: HagssFIN on December 23, 2021, 05:14:33 PM

Quote from: zoghotaa on December 23, 2021, 03:14:58 PM

Quote from: HagssFIN on December 14, 2021, 01:38:47 PM

@zoghotaa
Does the B8 miner have a total number of two PSUs?

After I looked at your logs, it seems to me that there is an error with the PSU in the first slot (slot 0).
It looks like the miner is unable to communicate with the PSU. And also it most likely does not give any DC voltage output. This could be verified with a multimeter.

Do you have a new PSU you could try?
I think it has to be the exact same type as the old one.

edit:
Based on all the info I've got,
this is the power supply model used in the B8 miner:
Eltek Flatpack2 48V/3000W HE
https://www.eltek.com/us/products/flatpack2-483000-he/

I know now how to operate a Huawei psu in b8
login with putty and write the command echo -n ' -no_psu '> panel/home/data/conf/- no_psu
now b8 hashing

That's great! I gave some merit.

Can you also share the exact details about the Huawei power supply model you are using?
It would be big help for other B8 users in the future.

https://www.beyondlogic.org/review-huawei-r4850g2-power-supply-53-5vdc-3kw/
or any psu 53v

Thanks! So one alternative power supply model for Bitfury B8 miner is Huawei R4850G2 power supply.

I saved the datasheet here for long time archiving:
https://mega.nz/file/E9lAkBoY#8qYt1nsjHtJ3ajAXMzkkfmUtiWPYkm0W1fy9fqMqO8w

Using this psu model requires the small mod which zoghotaa described earlier.

zoghotaa

newbie

Activity: 5

Merit: 8

Quote from: HagssFIN on December 23, 2021, 05:14:33 PM

Quote from: zoghotaa on December 23, 2021, 03:14:58 PM

Quote from: HagssFIN on December 14, 2021, 01:38:47 PM

@zoghotaa
Does the B8 miner have a total number of two PSUs?

After I looked at your logs, it seems to me that there is an error with the PSU in the first slot (slot 0).
It looks like the miner is unable to communicate with the PSU. And also it most likely does not give any DC voltage output. This could be verified with a multimeter.

Do you have a new PSU you could try?
I think it has to be the exact same type as the old one.

edit:
Based on all the info I've got,
this is the power supply model used in the B8 miner:
Eltek Flatpack2 48V/3000W HE
https://www.eltek.com/us/products/flatpack2-483000-he/

I know now how to operate a Huawei psu in b8
login with putty and write the command echo -n ' -no_psu '> panel/home/data/conf/- no_psu
now b8 hashing

That's great! I gave some merit.

Can you also share the exact details about the Huawei power supply model you are using?
It would be big help for other B8 users in the future.

https://www.beyondlogic.org/review-huawei-r4850g2-power-supply-53-5vdc-3kw/
or any psu 53v

HagssFIN

legendary

Activity: 2422

Merit: 1706

Electrical engineer. Mining since 2014.

Quote from: zoghotaa on December 23, 2021, 03:14:58 PM

Quote from: HagssFIN on December 14, 2021, 01:38:47 PM

@zoghotaa
Does the B8 miner have a total number of two PSUs?

After I looked at your logs, it seems to me that there is an error with the PSU in the first slot (slot 0).
It looks like the miner is unable to communicate with the PSU. And also it most likely does not give any DC voltage output. This could be verified with a multimeter.

Do you have a new PSU you could try?
I think it has to be the exact same type as the old one.

edit:
Based on all the info I've got,
this is the power supply model used in the B8 miner:
Eltek Flatpack2 48V/3000W HE
https://www.eltek.com/us/products/flatpack2-483000-he/

I know now how to operate a Huawei psu in b8
login with putty and write the command echo -n ' -no_psu '> panel/home/data/conf/- no_psu
now b8 hashing

That's great! I gave some merit.

Can you also share the exact details about the Huawei power supply model you are using?
It would be big help for other B8 users in the future.

zoghotaa

newbie

Activity: 5

Merit: 8

Quote from: HagssFIN on December 14, 2021, 01:38:47 PM

@zoghotaa
Does the B8 miner have a total number of two PSUs?

After I looked at your logs, it seems to me that there is an error with the PSU in the first slot (slot 0).
It looks like the miner is unable to communicate with the PSU. And also it most likely does not give any DC voltage output. This could be verified with a multimeter.

Do you have a new PSU you could try?
I think it has to be the exact same type as the old one.

edit:
Based on all the info I've got,
this is the power supply model used in the B8 miner:
Eltek Flatpack2 48V/3000W HE
https://www.eltek.com/us/products/flatpack2-483000-he/

I know now how to operate a Huawei psu in b8
login with putty and write the command echo -n ' -no_psu '> panel/home/data/conf/- no_psu
now b8 hashing

HagssFIN

legendary

Activity: 2422

Merit: 1706

Electrical engineer. Mining since 2014.

@zoghotaa
Does the B8 miner have a total number of two PSUs?

After I looked at your logs, it seems to me that there is an error with the PSU in the first slot (slot 0).
It looks like the miner is unable to communicate with the PSU. And also it most likely does not give any DC voltage output. This could be verified with a multimeter.

Do you have a new PSU you could try?
I think it has to be the exact same type as the old one.

edit:
Based on all the info I've got,
this is the power supply model used in the B8 miner:
Eltek Flatpack2 48V/3000W HE
https://www.eltek.com/us/products/flatpack2-483000-he/

zoghotaa

newbie

Activity: 5

Merit: 8

Quote from: NotFuzzyWarm on December 13, 2021, 10:08:13 PM

Is there any kind of debug logs you can pull up and post? If so, hopefully they could point to either a setup problem or PSU issue. If ya got logs, please use the code button in the tool bar to do it. looks like #

Code:

 Dec 14 12:50:30 777 OpenMiner[8164]:   PSU   0.0   0.0   0.00  0.000
Dec 14 12:50:30 777 OpenMiner[8164]: Board  46.7   0.3   0.01  0.000
Dec 14 12:50:30 777 OpenMiner[8164]: Temp(C) (min/avr/max): 22 / 22 / 23
Dec 14 12:50:30 777 OpenMiner[8164]: *** SLAVE HSI STATS:
Dec 14 12:50:30 777 OpenMiner[8164]: SLAVE                       UID  Mode  Trim  Diff        Hist
Dec 14 12:50:30 777 OpenMiner[8164]:     0  31001E000647373032313534     2    16  0.0%  0x00000000
Dec 14 12:50:30 777 OpenMiner[8164]: *** MASTER-SLAVE SPI BUS STATS:
Dec 14 12:50:30 777 OpenMiner[8164]: SLAVE                       UID         VER    TIME  PING  L     M=>S       rx  err     %     S=>M       rx  err     %  SS  SD
Dec 14 12:50:30 777 OpenMiner[8164]:     0  31001E000647373032313534  0x08166100  167890   189  1  2753107  2583891    0  0.0%  2583873  2583873    0  0.0%   0   0
Dec

Quote from: NotFuzzyWarm on December 13, 2021, 10:08:13 PM

Is there any kind of debug logs you can pull up and post? If so, hopefully they could point to either a setup problem or PSU issue. If ya got logs, please use the code button in the tool bar to do it. looks like #

Code:

 Dec 14 13:02:30 777 OpenMiner[8164]: PSU            Serial         Part  Version        Date                  Desc
Dec 14 13:02:30 777 OpenMiner[8164]:   1  0000174950007134  241119.105M        1  2017-12-05  FLATPACK2 48/3000 HE
Dec 14 13:02:30 777 OpenMiner[8164]:   0  0000000000000000                        0000-00-00
Dec 14 13:02:30 777 OpenMiner[8164]: PSU            Serial          State    Time  Set,V   U,V  I,A  P,Wt  Uin,V  Tin  Tout  DefV  LED  UpTime  FSR  FS  Status  NoTX      Rx  Alarm
Dec 14 13:02:30 777 OpenMiner[8164]:   1  0000174950007134  INITIAL_POWER  168611   48.0  53.5  0.0   0.0  228.0   23    25  53.5  G--       0  100  98  Normal     0  173234
Dec 14 13:02:30 777 OpenMiner[8164]:   0  0000000000000000  INITIAL_POWER  168611   48.0   0.0  0.0   0.0    0.0    0     0   0.0  ---       0    0   0   Error     0       0

[moderator's note: consecutive posts merged]

NotFuzzyWarm

legendary

Activity: 3612

Merit: 2506

Evil beware: We have waffles!

Is there any kind of debug logs you can pull up and post? If so, hopefully they could point to either a setup problem or PSU issue. If ya got logs, please use the code button in the tool bar to do it. looks like #

HagssFIN

legendary

Activity: 2422

Merit: 1706

Electrical engineer. Mining since 2014.

Bitfury B8 is a really rare miner here at Bitcointalk.

Another variant of it goes by name Facemen FM2018-B8.

I only know that it uses a 48VDC power supply,
and you need enough power capacity.

You might found more info from Bitfury themself or from Russian language forums (maybe bits.media).

zoghotaa

newbie

Activity: 5

Merit: 8

Quote from: Neo700 on December 13, 2021, 10:38:51 AM

Dear members
I changed eltek flatpack and use Huawei power supply
The b8 is up and working normally but not hashing
Please guys is there anyone using Huawei power supply . What changes I should make to start hashing
Thanks

I have the same problem and I'm looking for a solution

Neo700

newbie

Activity: 3

Merit: 0

I am using same output voltage power supply same features rectifier model 48 - 53 voltage
As per i know the missing is software modification but not one of the common use frameware used by most of us
I wonder if there is modification could be done with cmd command or whatever

BitMaxz

legendary

Activity: 3248

Merit: 2971

Block halving is coming.

It might be not hashing due to PSU you are using Bitfury b8 miners needs 6400w power supply.

If that PSU can't provide enough power then it won't run properly you must use a power supply that came from Bitfury or use a PSU that can provide enough power.

Neo700

newbie

Activity: 3

Merit: 0

Dear members
I changed eltek flatpack and use Huawei power supply
The b8 is up and working normally but not hashing
Please guys is there anyone using Huawei power supply . What changes I should make to start hashing
Thanks

Topic: Bitfury b8 with Huawie power supply hash boards not hashing (Read 153 times)