Someone please help...
I have 30 16xchip bitfury miners and need bitfury controllers v2
or another method of utilising these devices .. im loosing money here please help
Topic: Bitfury power connector (Read 2306 times)
Thank for your answer
Do you think i can put 2*2 pin connector instead of 1*6 pin ?
And witch port I need to connect the Bitfury controller data in or data out?
Do you think i can put 2*2 pin connector instead of 1*6 pin ?
And witch port I need to connect the Bitfury controller data in or data out?
I think what you need is 2x 3-pin connectors, not 1x 6-pin (notice on the board 3 are marked GND and 3 marked VCC). As far as the data cable, I'm not certain on that at the moment. I'll try to remember to find out and post later.
Thank for your answer
Do you think i can put 2*2 pin connector instead of 1*6 pin ?
And witch port I need to connect the Bitfury controller data in or data out?
Do you think i can put 2*2 pin connector instead of 1*6 pin ?
And witch port I need to connect the Bitfury controller data in or data out?
In this thread https://bitcointalksearch.org/topic/setup-guide-blackarrow-bitfury-16-chip-board-support-and-tuning-thread-615118, there's a link to power connectors like those. However those are 2-pin and for V1 boards. You seem to have V2 (as your green blocks looks like 2 3-pin connectors, instead of 2 2-pin), and I'm not sure but it looks like these connectors http://www.dx.com/p/3-pin-curved-screw-terminal-block-connectors-green-20-piece-pack-146623#.U-gCddaVvVM might be what you're looking for.
thank for yours answer
it is a 16x Bitfury Hashing Board form BlackArrow
http://www.blackarrowsoftware.com/store/40ghash-16x-bitfury-hashing-board.html
http://i60.tinypic.com/nvqkci.gif
i have a ATX To DC Power Adapter
http://www.blackarrowsoftware.com/store/atx-to-dc-power-adapter.html
http://img4.hostingpics.net/pics/161296img20140810111357.gif
but i don't know how to wire this two
it is a 16x Bitfury Hashing Board form BlackArrow
http://www.blackarrowsoftware.com/store/40ghash-16x-bitfury-hashing-board.html
http://i60.tinypic.com/nvqkci.gif
i have a ATX To DC Power Adapter
http://www.blackarrowsoftware.com/store/atx-to-dc-power-adapter.html
http://img4.hostingpics.net/pics/161296img20140810111357.gif
but i don't know how to wire this two
I'm having a difficult time making heads or tails out of that photo. Are you sure these are standard Bitfury rigs from MegaBigPower or BitfuryStrikesBack?
My 1st gen unit had screw terminals and 2 gen units had PCI-e connectors. The photo looks like those weird chinese power connectors they had on old ASICMiner Blades.
My 1st gen unit had screw terminals and 2 gen units had PCI-e connectors. The photo looks like those weird chinese power connectors they had on old ASICMiner Blades.
look into some of the red connectors available at a big box home improvement store or a local electrical supply house. I've found with a little bit of pinching on those connections you can get it to connect. Most of my bitfury cards had the barrel connections as well
Your kinda screwed if the seller didn't supply them with the unit. You'll probably have to make something yourself.
its a form of screw terminal, 6 pin, not sure on the mm.
nobody ?
I just buy some bitfury v2
and i have trouble with the power connector
http://www.hostingpics.net/viewer.php?id=148083IMG20140803224835.jpg
How and with what i connect it to the bitfury controller
Thank for your help
and i have trouble with the power connector
http://www.hostingpics.net/viewer.php?id=148083IMG20140803224835.jpg
How and with what i connect it to the bitfury controller
Thank for your help
Jump to: