Author

Topic: Bitmain Antminer S4 has Arrived. (Read 1183 times)

hero member
Activity: 1372
Merit: 783
better everyday ♥
December 08, 2014, 12:42:07 PM
#4
Antminers S4 setup is just like the Antminer S1, S2, S3 setup.

After connected to power on the network, there's usually there's a default IP set to get to the web interface on a browser (192.168.1.99), and then you just enter your pool info.  Here's what the page looks like where you'd enter into it :



Click Save, and you should start seeing your miner shares growing, and you're off and mining.  Good luck.

full member
Activity: 434
Merit: 101
https://www.payaccept.net/
December 07, 2014, 04:48:34 AM
#3
Yes, they are very easy to set up.
legendary
Activity: 1456
Merit: 1000
December 03, 2014, 04:59:50 PM
#2
There is a manual on Bitmain's website.  Also they are very easy to set, if you know pool information.  Set it and almost forget it so easy.
newbie
Activity: 2
Merit: 0
December 03, 2014, 04:50:55 PM
#1
All,

My Bitmain Antminer S4 arrived yesterday, and I am very anxious to open the box and get it set up.

I already have 3 USB dualminers running on my PC, currently mining altcoins. It took me forever and a day to figure out what I need to do in order to get it working properly.

CGMINER - unsuccessful in setting it up
CPUMINER - minor success in setting up, it would receive work from the pool, but the pool wouldn't display the work it was doing.
BFGMINER - better success than CPUMINER, I was able to connect but It wouldn't register all the miners connected to my PC.
MULTIMINER - SUCCESS! I sure am thankful for these GUI Miners. Once I went to the http://www.ftdichip.com/Drivers/D2XX.htm website and re-installed the drivers this way rather than just connecting the USBs and having them load the drivers themselves. It worked, all 3 Miners are successfully mining scrypt altcoins. Going thru Multiminer I was able to locate the command it used with BFGMINER, I wasn't selecting my COM ports with dualminer@COM7

If anyone has any pointers in setting up an AntMiner S4 please share a few tips, so that this will be rather quick set up. In the end I don't mind figuring it our for myself. Just seeing if someone is willing to share some knowledge.
Jump to: