Is your S9 PSU by APW3+ or APW3++? I found the specs for the APW3+. At this:
https://www.zeusbtc.com/share/apw3-plus-12-1600w-power-supply/apw3-plus-specs.jpg
Topic: Bitmain S9 pinout (Read 165 times)
As Kano said, they are standard 6-pin PCIe.
Breakout boards are only needed to adapt the outputs of hot-swap server PSU's that do not have PCie connectors. Do be aware that the PSU must be rated for at least 1,350w to power a s9 at full speed.
Breakout boards are only needed to adapt the outputs of hot-swap server PSU's that do not have PCie connectors. Do be aware that the PSU must be rated for at least 1,350w to power a s9 at full speed.
Standard 6 pin PCI-e connectors.
Can anyone supply a diagram of the 6 pin power connector pin out used on the Bitmain S9?
I'm wanting to power one with an ATX PSU. but I'm thinking that an adapter or breakout board is needed.........
TNX
I'm wanting to power one with an ATX PSU. but I'm thinking that an adapter or breakout board is needed.........
TNX
Jump to: