Thank you!
Topic: Bitmain S9 with invalid subnet mask (Read 149 times)
The IP reporter button restore helped indeed
Thank you!
Thank you!
Nope, unfortunately it won't ask/get DHCP IP.
check this it might help you
https://enforum.bitmain.com/bbs/topics/3957
I never got this error be4 but doing the 3rd reset method creates a new ip for the miner. So, it should work.
Nope, unfortunately it won't ask/get DHCP IP.
check this it might help you
https://enforum.bitmain.com/bbs/topics/3957
Nope, unfortunately it won't ask/get DHCP IP.
Hi,
I miss-typed a number and it seems that I bricked my S9's controller
.
What happened:
On the network config tab I typed the IP the values.
IP: 10.10.19.158
Subnet: 255.255.0.0 > Here I entered 255.25.0.0 which is not valid
Def.GW: 10.10.10.1
I clicked save and the invalid (non continous) network mask seemed to brick the controller.
It is not answering on the static IP, it is not answering on the previous DHCP IP (no ssh, no ping, no HTTP0.
Black factory reset button doesn't work either.
Any idea would be welcomed how can I get this controller back to life.
Thanks in advance!
I miss-typed a number and it seems that I bricked my S9's controller
.What happened:
On the network config tab I typed the IP the values.
IP: 10.10.19.158
Subnet: 255.255.0.0 > Here I entered 255.25.0.0 which is not valid
Def.GW: 10.10.10.1
I clicked save and the invalid (non continous) network mask seemed to brick the controller.
It is not answering on the static IP, it is not answering on the previous DHCP IP (no ssh, no ping, no HTTP0.
Black factory reset button doesn't work either.
Any idea would be welcomed how can I get this controller back to life.
Thanks in advance!
hey suggest you shut it down and put it on a router which can serve DHCP address and see if it gets an address from the router after you power on (wait for 5 minutes or so)
Hi,
I miss-typed a number and it seems that I bricked my S9's controller.
What happened:
On the network config tab I typed the IP the values.
IP: 10.10.19.158
Subnet: 255.255.0.0 > Here I entered 255.25.0.0 which is not valid
Def.GW: 10.10.10.1
I clicked save and the invalid (non continous) network mask seemed to brick the controller.
It is not answering on the static IP, it is not answering on the previous DHCP IP (no ssh, no ping, no HTTP0.
Black factory reset button doesn't work either.
Any idea would be welcomed how can I get this controller back to life.
Thanks in advance!
I miss-typed a number and it seems that I bricked my S9's controller
.What happened:
On the network config tab I typed the IP the values.
IP: 10.10.19.158
Subnet: 255.255.0.0 > Here I entered 255.25.0.0 which is not valid
Def.GW: 10.10.10.1
I clicked save and the invalid (non continous) network mask seemed to brick the controller.
It is not answering on the static IP, it is not answering on the previous DHCP IP (no ssh, no ping, no HTTP0.
Black factory reset button doesn't work either.
Any idea would be welcomed how can I get this controller back to life.
Thanks in advance!
Jump to: