Topic: Bitparking says 0mh/s (Read 2549 times)
amu 5 and 2 arnt accepting any shares so there hashrate dosnt get counter try each 1 on its own in a PC usb port on in the hub on the pi 1 at a time. more than likely its a power issue what else is in the hub? each erupter uses 500ma so if its a 3A hub the most you can run is 6 erupter plug anything else in and it will cause erupter to error
Only showing "Hash Rate (MHash/second) 1109.613" at bitparking yet...
Code:
cgminer version 3.4.2a - Started: [2013-09-27 22:17:00]
--------------------------------------------------------------------------------
(5s):1.917G (avg):1.972Gh/s | A:773024 R:16 HW:110453 WU:18.3/m
ST: 2 SS: 54 NB: 5744 LW: 1899379 GF: 19 RF: 0
Connected to mmpool.bitparking.com diff 16 with stratum as user jago25
Block: 0005d59caddc0c85... Diff:391M Started: [09:08:00] Best share: 1.35M
--------------------------------------------------------------------------------
[P]ool management [S]ettings [D]isplay options [Q]uit
AMU 0: | 335.8M/332.3Mh/s | A:188928 R: 0 HW: 3404 WU: 4.5/m
AMU 1: | 335.8M/332.6Mh/s | A:193648 R:16 HW: 2094 WU: 4.6/m
AMU 2: | 304.4M/310.6Mh/s | A: 0 R: 0 HW:85266 WU: 0.0/m
AMU 3: | 335.7M/332.6Mh/s | A:193040 R: 0 HW: 2063 WU: 4.6/m
AMU 4: | 335.6M/332.6Mh/s | A:197408 R: 0 HW: 2318 WU: 4.6/m
AMU 5: | 335.6M/332.2Mh/s | A: 0 R: 0 HW:15308 WU: 0.0/m
--------------------------------------------------------------------------------
[2013-09-27 22:16:57] Started cgminer 3.4.2a
[2013-10-27 08:57:04] USB: AMU2 read1 buffering 4 extra bytes
[2013-10-27 08:57:15] Accepted 051ed926 Diff 49/16 AMU 0
[2013-10-27 08:59:07] USB: AMU2 read1 buffering 4 extra bytes
[2013-10-27 08:59:15] Accepted 05ae35a6 Diff 45/16 AMU 0
[2013-10-27 09:00:00] Accepted 0af2bd0c Diff 23/16 AMU 1
[2013-10-27 09:00:38] Accepted 043ad73b Diff 60/16 AMU 0
[2013-10-27 09:01:19] Accepted 0be95b5c Diff 21/16 AMU 0
[2013-10-27 09:02:19] USB: AMU2 read1 buffering 4 extra bytes
[2013-10-27 09:03:27] Accepted 00a386fd Diff 400/16 AMU 3
[2013-10-27 09:03:46] USB: AMU5 read1 buffering 4 extra bytes
[2013-10-27 09:04:08] Accepted 0f5045d1 Diff 16/16 AMU 3
[2013-10-27 09:04:12] Accepted 01f2f718 Diff 131/16 AMU 3
[2013-10-27 09:04:50] Accepted 0276387d Diff 103/16 AMU 4
[2013-10-27 09:05:16] Accepted 05a6517a Diff 45/16 AMU 4
[2013-10-27 09:05:47] Accepted 0da07744 Diff 18/16 AMU 0
[2013-10-27 09:06:19] Accepted 045c1dd1 Diff 58/16 AMU 1
[2013-10-27 09:08:00] Stratum from pool 0 detected new block
[2013-10-27 09:08:26] Accepted 0d16aa17 Diff 19/16 AMU 3
[2013-10-27 09:08:54] Accepted 02649ff7 Diff 106/16 AMU 4
Here's a thread on he forum: https://bitcointalksearch.org/topic/which-usb-hub-to-use-with-block-erupters-nanofury-nf1-bpmc-red-fury-ant-u1-253749
I person use the D-link DUB-7 and Vantec 10 port listed in the thread.
Also, check that your username in cgminer and bitparking match.
I person use the D-link DUB-7 and Vantec 10 port listed in the thread.
Also, check that your username in cgminer and bitparking match.
The 2nd USB hub I've tried doesn't work (AMU0 errors).
Which hub on ebay (item number) definitely works?
Which hub on ebay (item number) definitely works?
You NEED a powered hub for the Erupter on a Pi. The Pi doesn't put out enough current from the USB port for it to properly power the device.
Seems I'm just talking to myself here using this thread like a diary. I was hoping someone might chime in and tell me a way to monitor the temp on the USB Eruptor.
Tried a USB flash drive in the Pi and it works... and the Eruptor works on the laptop (I've no USB powered hub yet to help with testing) which all points to the mips compiled cgminer... but different versions and I still get 4bytes etc and so forth.
I still think I've overstressed the Pi USB ports somehow. It would be good to be able to know that the ports are ok for sure.
update:
Now running on a BeagleBone but need to create the /dev/ entries for /dev/ttyUSB0 or AMU0...
Tried a USB flash drive in the Pi and it works... and the Eruptor works on the laptop (I've no USB powered hub yet to help with testing) which all points to the mips compiled cgminer... but different versions and I still get 4bytes etc and so forth.
I still think I've overstressed the Pi USB ports somehow. It would be good to be able to know that the ports are ok for sure.
update:
Now running on a BeagleBone but need to create the /dev/ entries for /dev/ttyUSB0 or AMU0...
Yup, USB HDD is dead too.
Let this be a lesson to you folks - if you plug your Eruptor straight into your Pi your'll burn it
shameless hotlink...
meanwhile... on the laptop:
I wonder how hot the Eruptor is running and what it's limit is... perhaps a fan is essential...
Let this be a lesson to you folks - if you plug your Eruptor straight into your Pi your'll burn it
shameless hotlink...
meanwhile... on the laptop:
Code:
AMU0: invalid nonce - HW error
Right... must be something to do with the RaspberryPi... no such errors from the laptop. Perhaps the USB port couldn't handle the heat.... will have to test some more...
edit:
^ though this is the CPU rathe rthan the ethernet/usb chip which also generates it's own heat. It's possible the heat from the Eruptor conducted through to the Pi and that's effected the Pi usb chip... however it's strange that the fail happened as it did; only slightly...
Next thing to do I suppose will be to try a USB HDD.
edit:
Code:
raspberrypi ~ $ /opt/vc/bin/vcgencmd measure_temp
temp=56.2'C
Next thing to do I suppose will be to try a USB HDD.
The hashrate reported at bitparking.com/(user) is saying zero.
I only have a single USB eruptor. It's saying:
What's going on?
edit: Ah there's a debug option in cgminer:
I only have a single USB eruptor. It's saying:
Code:
cgminer version 3.3.0a - Started: [2013-07-30 20:43:58]
--------------------------------------------------------------------------------
(5s):461.7M (avg):299.4Mh/s | A:159 R:0 HW:20574 U:0.0/m WU:3.0/m
ST: 2 SS: 0 NB: 876 LW: 74271 GF: 1 RF: 0
Connected to mmpool.bitparking.com diff 1 with stratum as user jago25
Block: 006726a679f3c22a... Diff:37.4M Started: [15:50:39] Best share: 19.5K
--------------------------------------------------------------------------------
[P]ool management [S]ettings [D]isplay options [Q]uit
AMU 0: | 200.0M/299.4Mh/s | A:159 R:0 HW:20574 U:0.02/m
--------------------------------------------------------------------------------
[2013-08-04 16:03:15] USB: AMU0 read1 buffering 4 extra bytes
[2013-08-04 16:03:44] USB: AMU0 read1 buffering 4 extra bytes
What's going on?
edit: Ah there's a debug option in cgminer:
Code:
[2013-08-04 16:05:20] USB scan devices: checking for AVA devices
[2013-08-04 16:05:20] AVA looking for AVA 0403:6001 but found 0424:9512 instead
[2013-08-04 16:05:20] AVA looking for AVA 0403:6001 but found 1d6b:0002 instead
[2013-08-04 16:05:20] AVA looking for AVA 0403:6001 but found 0424:ec00 instead
[2013-08-04 16:05:20] AVA looking for AVA 0403:6001 but found 10c4:ea60 instead
[2013-08-04 16:05:20] AMU0: GetResults (amt=0 err=-7 ern=0)
[2013-08-04 16:05:20] AMU0: GetResults (amt=0 err=-7 ern=0)
[2013-08-04 16:05:20] AMU0: GetResults (amt=0 err=-7 ern=0)
[2013-08-04 16:05:20] AMU0: GetResults (amt=0 err=-7 ern=0)
Jump to: