Topic: Black Arrow X-1 Instructional Thread (Read 1358 times)
More FAQ
As items are discussed in this thread I will add them to the FAQ, etc and then delete the post items to keep the thread short.
A description of all the UI options will be posted here. Along with any new developments for the product.
Management GUI Master Page:
Miner GUI Master Page:
Management GUI Master Page:
Miner GUI Master Page:
All early production units lack a LCD. Once these are delivered a description of the installation process will be added here.
X-1 FAQ:
Q: What kind of power cord do I need?
A: A standard "mickey mouse" cord. The technical name is IEC C5.
Q: How loud is the X-1?
A: The device makes no sound itself. There is very slight wind rustle this isn't audible 4 or 5 feet from the unit.
Q: How much power does the X-1 consume?
A:1200Mhz - 120-130gh - ~115-120w
1100Mhz - 112 - 118GH - ~107W
1000Mhz - 98 - 109GH - ~98W
Q: Does the X-1 come with an Ethernet cable?
A: No
Q: What kind of power cord do I need?
A: A standard "mickey mouse" cord. The technical name is IEC C5.
Q: How loud is the X-1?
A: The device makes no sound itself. There is very slight wind rustle this isn't audible 4 or 5 feet from the unit.
Q: How much power does the X-1 consume?
A:1200Mhz - 120-130gh - ~115-120w
1100Mhz - 112 - 118GH - ~107W
1000Mhz - 98 - 109GH - ~98W
Q: Does the X-1 come with an Ethernet cable?
A: No
General Set up instructions:
- Attach the Ethernet port to a network that is handing out DHCP addresses. Attach the power cord (that might or might not be included to 120, 208, or 240 volt power.
- The Management server should pick up a DHCP address.
- Navigate to http://DHCP_IP_Address/lcd
- You should be presented with the Miner GUI login screen. Login with user / blackarrow
- Navigate to the IP settings screen and configure a static IP that is available on your network.
- Navigate to the pool setting screen and input your pool configuration.
- Validate that the settings have been saved and pull the power cord to reset the device.
- Navigate to http://DHCP_IP_Address/ and login with user / blackarrow. Select the miner in the top left of the GUI. This will display the mining statistics for the integrated miner. You should have an obvious green flashing LED inside of the unit if the miner connects and is hashing.
I am going to pull in all the pertinent information around X-1's into this thread to assist with trouble shooting these devices.
There are some oddities specific to this equipment that haven't been seen before as well as some software bugs that will trip people up.
Post 1 - Physical description of the box.
Front:
Rear:
Typical Running configuration:
Management GUI example:
Miner GUI example:
There are some oddities specific to this equipment that haven't been seen before as well as some software bugs that will trip people up.
Post 1 - Physical description of the box.
Front:
Rear:
Typical Running configuration:
Management GUI example:
Miner GUI example:
Jump to: