Also the a beaglebone might be less suited for the task. Still hoping the some one can help me with the driver.
Topic: Blackarrow BifuryX16 boards hosted by Beaglebone, Possible? (.25BTC bounty) (Read 576 times)
June 04, 2014, 10:52:34 AM
To update, I have been told this would be very difficult to do. This is mostly due to the extra GPIO pins used to interface with the control board.
Also the a beaglebone might be less suited for the task. Still hoping the some one can help me with the driver.
Also the a beaglebone might be less suited for the task. Still hoping the some one can help me with the driver.
May 31, 2014, 02:32:45 PM
Does anyone know if a driver exists that can do this. The one based on chainminer (driver-bab.c) for Cgminer, Seems to be Raspberry pi only.
The Beaglebone looks better suited for controlling 20+ boards due to it's faster CPU.
If I match the SPI pins from the controller to the beaglebone, I think just a proper driver might do it.
Maybe?
Edit: Been trying to get this to work. No go, I am simply not a programmer. I will offer .25BTC to who ever modifies the driver to work. Or posts information in this thread that
leads to a working setup. The information would have to be very specific to Blackarrow bitfury boards working with a Beaglebone black. I can provide detailed info on my
configuration.
I have CGminer 4.3.4 compiled in minepeon for Beaglebone black. The bab driver and bfsc (BFL singles) are added. I have a V2 controller and 20 cards.
I followed instructions here:http://elinux.org/BeagleBone_Black_Enable_SPIDEV to enable the SPI01 interface. I also mapped the pins from the Beaglebone to the
cable connecting the the V2 controller card. Used these diagrams:
Raspberry Pi http://www.raspberrypi-spy.co.uk/2012/06/simple-guide-to-the-rpi-gpio-header-and-pins/
BeagleBone http://elinux.org/Beagleboard:Cape_Expansion_Headers
The Beaglebone looks better suited for controlling 20+ boards due to it's faster CPU.
If I match the SPI pins from the controller to the beaglebone, I think just a proper driver might do it.
Maybe?
Edit: Been trying to get this to work. No go, I am simply not a programmer. I will offer .25BTC to who ever modifies the driver to work. Or posts information in this thread that
leads to a working setup. The information would have to be very specific to Blackarrow bitfury boards working with a Beaglebone black. I can provide detailed info on my
configuration.
I have CGminer 4.3.4 compiled in minepeon for Beaglebone black. The bab driver and bfsc (BFL singles) are added. I have a V2 controller and 20 cards.
I followed instructions here:http://elinux.org/BeagleBone_Black_Enable_SPIDEV to enable the SPI01 interface. I also mapped the pins from the Beaglebone to the
cable connecting the the V2 controller card. Used these diagrams:
Raspberry Pi http://www.raspberrypi-spy.co.uk/2012/06/simple-guide-to-the-rpi-gpio-header-and-pins/
BeagleBone http://elinux.org/Beagleboard:Cape_Expansion_Headers
Jump to: