Topic: Blackminer Official Announcement: Pre-order for the F1mini—$179 availabe now (Read 1022 times)
September 02, 2020, 08:51:29 AM
what about putting cpu miner on there so we can mine all cpu coins or this thing aint worth it very limited.
August 12, 2019, 01:33:40 AM
Works fine. Great idea to create a one chip design.
3D printed case:
https://www.thingiverse.com/thing:3796636
3D printed case:
https://www.thingiverse.com/thing:3796636
such cute design！Maybe we should hold a design competition
August 10, 2019, 02:30:47 AM
Works fine. Great idea to create a one chip design.
3D printed case:
https://www.thingiverse.com/thing:3796636
3D printed case:
https://www.thingiverse.com/thing:3796636
August 07, 2019, 02:22:41 AM
Ok fine.
My F1 mini arrived today.
My F1 mini arrived today.
Hope you can enjoy your mining！
August 01, 2019, 11:16:01 PM
Ok fine.
My F1 mini arrived today.
My F1 mini arrived today.
July 31, 2019, 09:43:53 PM
How does work the Fan control?
You can set the fan speed on your PC
July 31, 2019, 01:58:45 PM
How does work the Fan control?
June 10, 2019, 02:55:44 PM
different algorithms, different earnings, best this miner to dig this algorithm tribus. and the payback two months
June 09, 2019, 08:48:40 PM
Following, would like to see more info about this.
There will be a promotion for Mini this month.
Interested in the promotion.
You can ask for the promotion code from DGB community
June 08, 2019, 04:29:57 AM
Following, would like to see more info about this.
There will be a promotion for Mini this month.
Interested in the promotion.
June 03, 2019, 05:18:51 AM
Following, would like to see more info about this.
There will be a promotion for Mini this month.
May 31, 2019, 08:26:06 PM
Following, would like to see more info about this.
April 08, 2019, 08:25:56 PM
As a complete newbie who's looking to start altcoin mining...
Reading this thread has me interested, because the replies state "Great for a newbie"
What would I need to set this up and start mining?
Would a rasberryPi do the trick? Or do I need a computer set up to configure everything?
Reading this thread has me interested, because the replies state "Great for a newbie"
What would I need to set this up and start mining?
Would a rasberryPi do the trick? Or do I need a computer set up to configure everything?
It's unbelievable for a hero member said he's newbie, LOL
You can join the discord find the user manual.
It's really convenient, you needn't run any software, it almost start work at the meantime of power-on.
April 08, 2019, 11:10:05 AM
As a complete newbie who's looking to start altcoin mining...
Reading this thread has me interested, because the replies state "Great for a newbie"
What would I need to set this up and start mining?
Would a rasberryPi do the trick? Or do I need a computer set up to configure everything?
Reading this thread has me interested, because the replies state "Great for a newbie"
What would I need to set this up and start mining?
Would a rasberryPi do the trick? Or do I need a computer set up to configure everything?
April 08, 2019, 10:38:13 AM
If I want to use my BBboard of my Asic Brick on Mini, what should I do?
You'd better add our discord: https://discord.gg/eUNRSgy
And call for help at support channel
April 07, 2019, 10:37:38 PM
reserved according to the CPU heat sink and some Intel CPU LGA115X series radiators can be used
so cool , I will use water cooling system
so cool , I will use water cooling system
April 06, 2019, 09:23:25 AM
The common CPU heat sink is OK
Hi, is this simple CPU Cooler Fan 90mm PWM 4pin CPU Fan with Heatsink suitable for use with F1Mini? Is possible to use 3 pin Fan instead of 4 pin PWM fan?
Cheers W_M
4pin GPU fun is recommended. If you want to use 3pin one, customize fan speed should be set to 0% on the configuration page,then it should also be able to run
April 04, 2019, 08:43:07 AM
The common CPU heat sink is OK
Hi, is this simple CPU Cooler Fan 90mm PWM 4pin CPU Fan with Heatsink suitable for use with F1Mini? Is possible to use 3 pin Fan instead of 4 pin PWM fan?
Cheers W_M
It is also interesting to know the official answer to this question. Seems to me cooling will not be enough for such work.
April 04, 2019, 06:21:24 AM
The common CPU heat sink is OK
Hi, is this simple CPU Cooler Fan 90mm PWM 4pin CPU Fan with Heatsink suitable for use with F1Mini? Is possible to use 3 pin Fan instead of 4 pin PWM fan?
Cheers W_M
Im also interested in the anwser to this question.
April 03, 2019, 01:39:50 PM
The common CPU heat sink is OK
Hi, is this simple CPU Cooler Fan 90mm PWM 4pin CPU Fan with Heatsink suitable for use with F1Mini? Is possible to use 3 pin Fan instead of 4 pin PWM fan?
Cheers W_M
April 02, 2019, 02:35:47 AM
This is the best choice for home/office mining.
in order to meet the majority needs of our users, the group purchase price of F1mini is coming: $169 ( ≥5 units for one order)
F1mini supports the same algorithms as F1/F1+, and the power consumption is about 50W(similar to a laptop). Performance is 1/18 of F1+. It's completely quiet.
Pre-sale start prosperously by this entrance：https://www.hashaltcoin.com/en/miners
BTW: today's calculator is crazy!It's going on rising, we don't know what happened! By the latest revenue, the ROI of F1mini would be shorten to less than 96 days!
in order to meet the majority needs of our users, the group purchase price of F1mini is coming: $169 ( ≥5 units for one order)
F1mini supports the same algorithms as F1/F1+, and the power consumption is about 50W(similar to a laptop). Performance is 1/18 of F1+. It's completely quiet.
Pre-sale start prosperously by this entrance：https://www.hashaltcoin.com/en/miners
BTW: today's calculator is crazy!It's going on rising, we don't know what happened! By the latest revenue, the ROI of F1mini would be shorten to less than 96 days!
April 02, 2019, 02:19:40 AM
Hi, exactly what kind of heat sink setup is needed?
Cheers WM
The common CPU heat sink is OKCheers WM
April 01, 2019, 01:05:32 AM
Hi, exactly what kind of heat sink setup is needed?
Cheers WM
Cheers WM
March 30, 2019, 08:26:21 AM
Pretty interesting. Have you ever considered just allowing someone to provide their own Beagleboard to make it ever cheaper and less complicated?
It's a good idea and we'll discuss it
March 30, 2019, 02:33:29 AM
Pretty interesting. Have you ever considered just allowing someone to provide their own Beagleboard to make it ever cheaper and less complicated?
March 29, 2019, 08:42:14 PM
personally i think mining tech is moving really fast right now
You are right, so How important it is to have an entry-level miner that can be upgraded online any time
March 29, 2019, 08:37:14 PM
It looks like if you got a slim enough heatsink setup... you could screw together a little tower of them, all connected together with those littel M3 hex rods
https://www.hashaltcoin.com/en/batches/14
...but then you're just building the stretch-limo version of an F1-Single
https://www.hashaltcoin.com/en/batches/14
...but then you're just building the stretch-limo version of an F1-Single
No heat sink and no power supply are included in order to reduce shipping cost.
That's a good idea to get the slim heatsink, you can have try
March 29, 2019, 08:30:36 PM
I always wanted to see that kind of FPGA miner with big, proper heatsink and low noise fan - is it finally here?
Yes, here it is!
March 29, 2019, 04:15:08 PM
hmm, this is cute actually, i could picture alot of little projects with these
could be good way to get some friends into flexible low $ entry alt mining too
180$usd, seems reasonable
good luck on sales!
personally i think mining tech is moving really fast right now, so im letting things shake out for a few more months b4 i expand anymore myself haha #noballs
could be good way to get some friends into flexible low $ entry alt mining too
180$usd, seems reasonable
good luck on sales!
personally i think mining tech is moving really fast right now, so im letting things shake out for a few more months b4 i expand anymore myself haha #noballs
March 29, 2019, 03:45:48 PM
It looks like if you got a slim enough heatsink setup... you could screw together a little tower of them, all connected together with those littel M3 hex rods
https://www.hashaltcoin.com/en/batches/14
...but then you're just building the stretch-limo version of an F1-Single
https://www.hashaltcoin.com/en/batches/14
...but then you're just building the stretch-limo version of an F1-Single
March 29, 2019, 02:25:53 PM
I always wanted to see that kind of FPGA miner with big, proper heatsink and low noise fan - is it finally here?
March 29, 2019, 12:31:54 PM
Blackminer F1mini is a new single-chip FPGA miner that inherits the characteristics of Blackminer F series miner. It's more powerfrugal and completely silent, which is the first choice for FPGA Altcoin newbies.
This is a pre-sale, the first batch is only 300 units.
here is the entrance：https://www.hashaltcoin.com/en/batches/14
There is PCI-E and DC interfaces. ATX power supply, DC 12V 6A or 12V 8A power supply are suitable to use. The hole position is reserved according to the CPU heat sink, and some Intel CPU LGA115X series radiators can be used. No heat sink and no power supply are included in order to reduce shipping cost.
It's power less than 50w（Similar to a laptop）,The silent CPU heat sink make people ignore the exist of it.
F1 mini supports the same algorithms as F1/F1+, which has not only high flexibility and very good stability and better performance.
Veriblock: 1.0 GH/s
lyra2z: 5.1MH/s
skeincoin: 420MH/s
xvg_lyra2rev2: 18 MH/s
phi1612: 26 MH/s
tribus: 244 MH/s
nexus: 210 MH/s
bcx: 1.4 GH/s
0xbtc: 1.9 GH/s
keccak: 1.9 GH/s
xdag: 1.5 GH/s
zp: 1.9 GH/s
Verus 2: 22.8 MH/s
keccakc: 2.18 GH/s
keccakd: 2.18 GH/s
amoveo: 4.59 GH/s
sha3d: 755 MH/s
bcd: 15.4 MH/s
lyra2rev3: 20 MH/s
Specific parameters:
Weight: 136.4g (net weight) 500g (package)
Size: 13 cm * 11 cm * 2.1 cm
Delivery date: May 5, 2019(It may be shipped ahead of the schedule)
This is a pre-sale, the first batch is only 300 units.
here is the entrance：https://www.hashaltcoin.com/en/batches/14
There is PCI-E and DC interfaces. ATX power supply, DC 12V 6A or 12V 8A power supply are suitable to use. The hole position is reserved according to the CPU heat sink, and some Intel CPU LGA115X series radiators can be used. No heat sink and no power supply are included in order to reduce shipping cost.
It's power less than 50w（Similar to a laptop）,The silent CPU heat sink make people ignore the exist of it.
F1 mini supports the same algorithms as F1/F1+, which has not only high flexibility and very good stability and better performance.
Veriblock: 1.0 GH/s
lyra2z: 5.1MH/s
skeincoin: 420MH/s
xvg_lyra2rev2: 18 MH/s
phi1612: 26 MH/s
tribus: 244 MH/s
nexus: 210 MH/s
bcx: 1.4 GH/s
0xbtc: 1.9 GH/s
keccak: 1.9 GH/s
xdag: 1.5 GH/s
zp: 1.9 GH/s
Verus 2: 22.8 MH/s
keccakc: 2.18 GH/s
keccakd: 2.18 GH/s
amoveo: 4.59 GH/s
sha3d: 755 MH/s
bcd: 15.4 MH/s
lyra2rev3: 20 MH/s
Specific parameters:
Weight: 136.4g (net weight) 500g (package)
Size: 13 cm * 11 cm * 2.1 cm
Delivery date: May 5, 2019(It may be shipped ahead of the schedule)
Jump to: