Topic: Block Erupter Blade (Backplane +5 Blades) (Read 1469 times)
I would just buy the cheap PSU that is made to work with it.
I think I paid $45 for my HP DPS 800GB on Amazon. And it works just fine. Some say its loud but it doesn't bother me.
I would just buy the cheap PSU that is made to work with it.
Could you direct me to that guide? As I am not sure 1 cable is wise for a back plane that has 5 BE's on it.
Yes it has a 12+ Green Tab to wire cables to and a GND Tab. https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn2/1376363_151933188351065_640967426_n.jpg
The same was as in my setup guide.
Yes it has a 12+ Green Tab to wire cables to and a GND Tab. https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn2/1376363_151933188351065_640967426_n.jpg
Hello!
I have just been delivered 1 Backplane + 5 BE Blade's
I have not got the "HP DPS 800GBA PSU"
And was wondering how you would wire a standard Corsair 850W PSU to the backplane that is provided.
Thanks to anyone who could help, I cannot find a guide anywhere for the backplane.
I have just been delivered 1 Backplane + 5 BE Blade's
I have not got the "HP DPS 800GBA PSU"
And was wondering how you would wire a standard Corsair 850W PSU to the backplane that is provided.
Thanks to anyone who could help, I cannot find a guide anywhere for the backplane.
I am *guessing* that it would draw directly from your 12V line. however, your 850w PSU may only provide 650W over 12V, possible split between 2 rails. If 2 rails is the case, then you would need to wire both together or risk using more than the amperage provided to each individual rail.
Im assuming the backplane has an obvious spot to connect a +12V and GND lines
Hello!
I have just been delivered 1 Backplane + 5 BE Blade's
I have not got the "HP DPS 800GBA PSU"
And was wondering how you would wire a standard Corsair 850W PSU to the backplane that is provided.
Thanks to anyone who could help, I cannot find a guide anywhere for the backplane.
I think you can only Use the HP psu, the amount of re soldering and thing you would need to wire a standard ATX psu are very high. I have just been delivered 1 Backplane + 5 BE Blade's
I have not got the "HP DPS 800GBA PSU"
And was wondering how you would wire a standard Corsair 850W PSU to the backplane that is provided.
Thanks to anyone who could help, I cannot find a guide anywhere for the backplane.
Hello!
I have just been delivered 1 Backplane + 5 BE Blade's
I have not got the "HP DPS 800GBA PSU"
And was wondering how you would wire a standard Corsair 850W PSU to the backplane that is provided.
Thanks to anyone who could help, I cannot find a guide anywhere for the backplane.
I have just been delivered 1 Backplane + 5 BE Blade's
I have not got the "HP DPS 800GBA PSU"
And was wondering how you would wire a standard Corsair 850W PSU to the backplane that is provided.
Thanks to anyone who could help, I cannot find a guide anywhere for the backplane.
Jump to: