Author

Topic: Block Erupter Blade (New Model) User Guide (Read 2591 times)

hero member
Activity: 784
Merit: 1004
Glow Stick Dance!
September 23, 2013, 03:12:10 AM
#10
Hi guys,
I received my two new blade, but:
- the first one never switched on
- the second worked fine for one day and now it's dead.


any suggestions?

If you need help, dogie started a great support thread for Blades here...
https://bitcointalksearch.org/topic/guide-dogies-comprehensive-asicminer-blade-setup-205369

But I'll guess here that you fudged your connectors somehow.  I'm pretty clueless when it comes to anything but plug&play but I've managed to get 8 Blades up and running.  3 gave me some minor problems and 2 of those were because if my crappily-crafted power connectors.  The other one needed a hardware reset.
sr. member
Activity: 372
Merit: 250
September 23, 2013, 02:15:12 AM
#9
Hi guys,
I received my two new blade, but:
- the first one never switched on
- the second worked fine for one day and now it's dead.


any suggestions?
legendary
Activity: 1288
Merit: 1227
Away on an extended break
September 17, 2013, 08:56:55 AM
#8
Can a mod fix the link in his post?

Done, cheers.
vip
Activity: 198
Merit: 101
September 14, 2013, 11:01:21 PM
#7
Can a mod fix the link in his post?
legendary
Activity: 1652
Merit: 1067
Christian Antkow
sr. member
Activity: 313
Merit: 250
September 14, 2013, 06:27:53 PM
#5


Notes:

1. If you couldn't access to 192.168.1.254:8000, please try doing a hardware reset by short-cutting the two pins closest to the ethernet socket and try again.
2. Please take additional care to polarity.

Fixed Picture Link  Wink
legendary
Activity: 1666
Merit: 1185
dogiecoin.com
September 14, 2013, 04:05:55 AM
#4
Thread is pointless, these sheets of paper aren't even included in the packages. I still get 20 pms a day asking for help. Don't bother posting it here, post it in the actual help thread where people will actually help.

https://bitcointalksearch.org/topic/guide-dogies-comprehensive-asicminer-blade-setup-205369
hero member
Activity: 630
Merit: 501
Miner Setup And Reviews. WASP Rep.
September 14, 2013, 03:36:34 AM
#3
It just links to a proxy website.
http://www.freewebproxy.com/
hero member
Activity: 812
Merit: 505
The Last NXT Founder
September 14, 2013, 03:16:15 AM
#2
link is broken...
donator
Activity: 848
Merit: 1005
September 14, 2013, 03:13:00 AM
#1


Notes:

1. If you couldn't access to 192.168.1.254:8000, please try doing a hardware reset by short-cutting the two pins closest to the ethernet socket and try again.
2. Please take additional care to polarity.


Jump to: