I tried everything in that says in that topic and nothing!
I'm saying post there, the helpers are there. 
Topic: Block Erupter Blade Support Request (ooxxxxx related) (Read 4651 times)
I tried everything in that says in that topic and nothing!
Cant guarantee anything I am about to post but, when checking the voltages are you sticking your black lead into a neutral or negative port on the power supply or putting both probes in the same holes on the blade with the wire you feed the blade from the power supply with?
If you use one probe directly to the power supply, you will get an incorrect reading and it can be quite far off. Dont ask how I know
. Its a long shot, I hope this helps you out.
I tried everything in that says in that topic and nothing!
Hi Friedcat,
I bought several things of asicminer to an user on ebay called ufoman2002, i think he is an excellent seller, maybe you know him.
In the things that i bought to this user, there is a Blade.
At the beginning the blade works just fine (a week ago), but now i’m getting this message:
Chip: OOOOOOOOOOOOOxOOOOOOOOOOxxxxOOOO
I was running the blade without overclocking and suddenly the hashrate become down to 9.1ghash/s and I saw the “x”s.
I did my research, i tried several things (adjusting voltage, changing clock, changing power supply, etc, etc) but I always get this five x. To compensate the losing of hashing power i overclocked the blade I’m now I’m getting 10.5 ghash/s with overclock.
Because I'm a newbie on this forum, i cannot contact direct to you, so Michael from btcguild.com it's helping me to contact you and i very grateful to him for what he is doing.
Coming back to the original topic, what do you think I should do with the blade?
Thank you and sorry for my english!! I’m from Argentina.
I bought several things of asicminer to an user on ebay called ufoman2002, i think he is an excellent seller, maybe you know him.
In the things that i bought to this user, there is a Blade.
At the beginning the blade works just fine (a week ago), but now i’m getting this message:
Chip: OOOOOOOOOOOOOxOOOOOOOOOOxxxxOOOO
I was running the blade without overclocking and suddenly the hashrate become down to 9.1ghash/s and I saw the “x”s.
I did my research, i tried several things (adjusting voltage, changing clock, changing power supply, etc, etc) but I always get this five x. To compensate the losing of hashing power i overclocked the blade I’m now I’m getting 10.5 ghash/s with overclock.
Because I'm a newbie on this forum, i cannot contact direct to you, so Michael from btcguild.com it's helping me to contact you and i very grateful to him for what he is doing.
Coming back to the original topic, what do you think I should do with the blade?
Thank you and sorry for my english!! I’m from Argentina.
This user is having an issue related to the OOOOxOOO part on his Block Erupter blade interface and is trying to find out if there is anything he can do. Since he's locked in the newbie forum, he can't post here where he would be most likely to get support, so I am cross-posting it for him.
The original thread is here: https://bitcointalksearch.org/topic/m.3159488
Jump to: