blockchain fee | Bitcointalksearch.org

krishnapramod

legendary

Activity: 1470

Merit: 1079

Quote from: louis144 on August 19, 2017, 06:11:38 AM

the bitcoin fee you have to pay depends of the number of bytes of the transaction ( and seems to be independent of the amount of the transaction) but when you perform a sending transaction in blockchain the number of bytes is not displayed so you don't know the number of bytes.So you don't know how much fee you have to pay.

Unlike some wallets Blockchain doesn't have a fixed default fee. You can select regular or priority transaction fee or you can set a custom fee per bytes. Select customize fee and enter sat/b, it is displayed.

https://bitcoinfees.21.co

Tyrantt

hero member

Activity: 1022

Merit: 564

Need some spare btc for a new PC

blockchain.info wallet fee isn't that high as of now, it's was much higher before august. You can open up advanced settings when setting up fee and it will open up a bonus menu where you can setup your fee more precisely. There's nothing more to it than that.

boyptc

hero member

Activity: 3024

Merit: 680

★Bitvest.io★ Play Plinko or Invest!

Quote from: crairezx20 on August 29, 2017, 01:17:00 PM

I suggest if you really want for more control if your bitcoin better to use other wallet try electrum instead that you can manually put custom fee just to increase the transaction speed

The fee on electrum is higher than blockchain.info's recommended sat's per byte. I've been with it and I never experienced before to pay too much and pay $17 just for a single transaction. And in blockchain.info I usually pay $1-$2 per transaction so that was a crazy fee with electrum.

Quote from: crairezx20 on August 29, 2017, 01:17:00 PM

Also don't forget to use pool.viabtc.com/tools/txaccelerator/

This is hard to timing just to re-broadcast your transaction as it's crowded all the time.

crairezx20

legendary

Activity: 1638

Merit: 1046

I suggest if you really want for more control if your bitcoin better to use other wallet try electrum instead that you can manually put custom fee just to increase the transaction speed or you can use this site bitcoinfees.21.co
And check if what is the default fee so that you don't experience of delay transaction. I am always using the default fee from bitcoin fees where my transaction confirm in minutes. I stop using web wallet because of the transaction delay confirm..

Also don't forget to use pool.viabtc.com/tools/txaccelerator/
So that you can speedup your transaction it can help to confirm your transaction if you have stuck or still pending transaction..

amacar2

legendary

Activity: 1120

Merit: 1008

CryptoTalk.Org - Get Paid for every Post!

Quote from: louis144 on August 19, 2017, 06:11:38 AM

the bitcoin fee you have to pay depends of the number of bytes of the transaction ( and seems to be independent of the amount of the transaction) but when you perform a sending transaction in blockchain the number of bytes is not displayed so you don't know the number of bytes.So you don't know how much fee you have to pay.

Yes you can't see that but recently blockchain.info have introduced custom fee feature where you can set fee per byte or you can use priority fee they will set to make sure you will get confirmation within next few blocks.

bL4nkcode

copper member

Activity: 2142

Merit: 1305

Limited in number. Limitless in potential.

Quote from: spngebob on August 27, 2017, 05:11:39 AM

Quote from: louis144 on August 19, 2017, 06:11:38 AM

the bitcoin fee you have to pay depends of the number of bytes of the transaction ( and seems to be independent of the amount of the transaction) but when you perform a sending transaction in blockchain the number of bytes is not displayed so you don't know the number of bytes.So you don't know how much fee you have to pay.

Click on "customize fee", click how much satoshi/byte you want to pay, and it blockchain.info will calculate how much fee you will pay.
So everything is displayed, i am not sure how did you miss it.

The one that OP's talking is the number of the size of the transaction per byte, and it's really obvious that blockchain wallet have the feature to make a transaction fee which base on its size per byte and will calculate if how much the fee you will pay, but the thing is you can't see the size of your transaction (sat per byte) but the transaction fees only.

spngebob

sr. member

Activity: 770

Merit: 254

Quote from: louis144 on August 19, 2017, 06:11:38 AM

the bitcoin fee you have to pay depends of the number of bytes of the transaction ( and seems to be independent of the amount of the transaction) but when you perform a sending transaction in blockchain the number of bytes is not displayed so you don't know the number of bytes.So you don't know how much fee you have to pay.

Click on "customize fee", click how much satoshi/byte you want to pay, and it blockchain.info will calculate how much fee you will pay.
So everything is displayed, i am not sure how did you miss it.

Lanatsa

hero member

Activity: 2968

Merit: 687

Quote from: klf on August 19, 2017, 09:16:27 PM

Quote from: louis144 on August 19, 2017, 06:59:25 AM

the estimation of blockchain.info is not good.
I did a sending transaction from blockchain.info of 0,12btc and the default fee was 0,000013btc:to small:it took 6 days before confirmed.
I sended a mail to blockchain.info support with that message but they didn't respond.
Thanks for your information to calculate the number of bytes.

Correct usually their default fees are quite less and I usually change that fee to a decent amount to make your transaction confirmation fast. I never send with their default fee and it is good to know that if I use their suggestion it takes such a long time to confirm.

This is what i observed too when i do make use of their average or default fee option on sending bitcoins in other wallet because when i do make use of it my transactions are way too slower and this is why im already awared on this thing and this is why i do go on using electrum instead since it do give automatically amount of fees depending on your transacted amount which is great.

klf

legendary

Activity: 1344

Merit: 1000

Quote from: louis144 on August 19, 2017, 06:59:25 AM

the estimation of blockchain.info is not good.
I did a sending transaction from blockchain.info of 0,12btc and the default fee was 0,000013btc:to small:it took 6 days before confirmed.
I sended a mail to blockchain.info support with that message but they didn't respond.
Thanks for your information to calculate the number of bytes.

Correct usually their default fees are quite less and I usually change that fee to a decent amount to make your transaction confirmation fast. I never send with their default fee and it is good to know that if I use their suggestion it takes such a long time to confirm.

bL4nkcode

copper member

Activity: 2142

Merit: 1305

Limited in number. Limitless in potential.

Quote from: louis144 on August 19, 2017, 06:11:38 AM

the bitcoin fee you have to pay depends of the number of bytes of the transaction ( and seems to be independent of the amount of the transaction)

Yes that's right that the transaction fee will depend on the number of bytes on your transaction

Quote from: louis144 on August 19, 2017, 06:11:38 AM

but when you perform a sending transaction in blockchain the number of bytes is not displayed so you don't know the number of bytes.So you don't know how much fee you have to pay.

Well that's one of the disadvantages of using blockchain.info wallet and in the end, it might be your fee is too low for the size of the transaction and sometimes it's too huge that's more than the size of the transaction. That's why I'm always recommending using Mycelium wallet because (i) you can see the size of your transaction in terms of bytes, (ii) you can see the size of your transaction fee (per byte) and the estimated time when it will confirm, (iii) you can see the overall transaction fee in terms of (mBTC). The only thing is you can you can't enter your transaction manually, you only have to choose its dynamics fees from priority, normal, economic and low prio but it's still okay for me tho.

Here's some screenshot shot from my mycelium.

louis144

newbie

Activity: 30

Merit: 0

the estimation of blockchain.info is not good.
I did a sending transaction from blockchain.info of 0,12btc and the default fee was 0,000013btc:to small:it took 6 days before confirmed.
I sended a mail to blockchain.info support with that message but they didn't respond.
Thanks for your information to calculate the number of bytes.

xypos

sr. member

Activity: 532

Merit: 250

Quote from: louis144 on August 19, 2017, 06:11:38 AM

the bitcoin fee you have to pay depends of the number of bytes of the transaction ( and seems to be independent of the amount of the transaction) but when you perform a sending transaction in blockchain the number of bytes is not displayed so you don't know the number of bytes.So you don't know how much fee you have to pay.

Pretty sure that blockchain.info gives you info about the amount of transaction fees you have to pay before you send the transaction, and there is even a custom send option in which you can choose your own fee level. Does it not?

And yes, fees do depend on the amount of bytes of your transaction. It's got nothing to do with the value of btc you are sending whatsoever.

If for whatever reason blockchain.info fails to give you an estimate(extremely weird, contact their support), you can estimate the transaction size yourself: amountofinputs*180 + amountofoutputs*34 + 10.

louis144

newbie

Activity: 30

Merit: 0

instead of blockchain i mean blockchain.info

louis144

newbie

Activity: 30

Merit: 0

the bitcoin fee you have to pay depends of the number of bytes of the transaction ( and seems to be independent of the amount of the transaction) but when you perform a sending transaction in blockchain the number of bytes is not displayed so you don't know the number of bytes.So you don't know how much fee you have to pay.

Topic: blockchain fee (Read 466 times)