well done
Topic: [BOUNTY] - Asicminer tube problem (Read 2668 times)
canary you are a good soul.
well done
well done
Hi
I would test each hashing board indyvidually (only hashing cable to controller)
one faulty board can give results you have.
Please also use only hashing cable socket closest to ethernet socket.
Other ones does not work.
Maybe controller is faulty. I got same results with bad controller.
Controller PSU if is weak (amperage) can also not detect boards.
Good luck, man!
I would test each hashing board indyvidually (only hashing cable to controller)
one faulty board can give results you have.
Please also use only hashing cable socket closest to ethernet socket.
Other ones does not work.
Maybe controller is faulty. I got same results with bad controller.
Controller PSU if is weak (amperage) can also not detect boards.
Good luck, man!
sonofabitch
you win.
Had to plug it into the port nearest the ethernet.
Shoot me an address.
Ahem... Check my last post...
Shiz, totally missed that.
you are correct sir.....you win.
send an address.
will get er done tomorrow when I am back in the office.
thanks for the help.
Hi
I would test each hashing board indyvidually (only hashing cable to controller)
one faulty board can give results you have.
Please also use only hashing cable socket closest to ethernet socket.
Other ones does not work.
Maybe controller is faulty. I got same results with bad controller.
Controller PSU if is weak (amperage) can also not detect boards.
Good luck, man!
I would test each hashing board indyvidually (only hashing cable to controller)
one faulty board can give results you have.
Please also use only hashing cable socket closest to ethernet socket.
Other ones does not work.
Maybe controller is faulty. I got same results with bad controller.
Controller PSU if is weak (amperage) can also not detect boards.
Good luck, man!
sonofabitch
you win.
Had to plug it into the port nearest the ethernet.
Shoot me an address.
Ahem... Check my last post...
Shiz, totally missed that.
you are correct sir.....you win.
send an address.
Hi
I would test each hashing board indyvidually (only hashing cable to controller)
one faulty board can give results you have.
Please also use only hashing cable socket closest to ethernet socket.
Other ones does not work.
Maybe controller is faulty. I got same results with bad controller.
Controller PSU if is weak (amperage) can also not detect boards.
Good luck, man!
I would test each hashing board indyvidually (only hashing cable to controller)
one faulty board can give results you have.
Please also use only hashing cable socket closest to ethernet socket.
Other ones does not work.
Maybe controller is faulty. I got same results with bad controller.
Controller PSU if is weak (amperage) can also not detect boards.
Good luck, man!
sonofabitch
you win.
Had to plug it into the port nearest the ethernet.
Shoot me an address.
Ahem... Check my last post...
Shiz, totally missed that.
you are correct sir.....you win.
send an address.
Hi
I would test each hashing board indyvidually (only hashing cable to controller)
one faulty board can give results you have.
Please also use only hashing cable socket closest to ethernet socket.
Other ones does not work.
Maybe controller is faulty. I got same results with bad controller.
Controller PSU if is weak (amperage) can also not detect boards.
Good luck, man!
I would test each hashing board indyvidually (only hashing cable to controller)
one faulty board can give results you have.
Please also use only hashing cable socket closest to ethernet socket.
Other ones does not work.
Maybe controller is faulty. I got same results with bad controller.
Controller PSU if is weak (amperage) can also not detect boards.
Good luck, man!
sonofabitch
you win.
Had to plug it into the port nearest the ethernet.
Shoot me an address.
Hi
I would test each hashing board indyvidually (only hashing cable to controller)
one faulty board can give results you have.
Please also use only hashing cable socket closest to ethernet socket.
Other ones does not work.
Maybe controller is faulty. I got same results with bad controller.
Controller PSU if is weak (amperage) can also not detect boards.
Good luck, man!
I would test each hashing board indyvidually (only hashing cable to controller)
one faulty board can give results you have.
Please also use only hashing cable socket closest to ethernet socket.
Other ones does not work.
Maybe controller is faulty. I got same results with bad controller.
Controller PSU if is weak (amperage) can also not detect boards.
Good luck, man!
sonofabitch
you win.
Had to plug it into the port nearest the ethernet.
Shoot me an address.
Just refollow the steps in my guide till you find the error rather than everyone spamming bits of the 20 steps.
Hi
I would test each hashing board indyvidually (only hashing cable to controller)
one faulty board can give results you have.
Please also use only hashing cable socket closest to ethernet socket.
Other ones does not work.
Maybe controller is faulty. I got same results with bad controller.
Controller PSU if is weak (amperage) can also not detect boards.
Good luck, man!
I would test each hashing board indyvidually (only hashing cable to controller)
one faulty board can give results you have.
Please also use only hashing cable socket closest to ethernet socket.
Other ones does not work.
Maybe controller is faulty. I got same results with bad controller.
Controller PSU if is weak (amperage) can also not detect boards.
Good luck, man!
Doesn't look wrong at first glance... Post screenshots of other sections
The other sections show nothing of interest. "Test Status" is blank, and "statistics" just show it not hashing.
Controller doesn't see any boards.
suggested steps?
Plug into the port on controller closest to Ethernet port.
Finally run that flashmega command.
A blank test status IS of interest...
Controller doesn't see any boards.
Controller doesn't see any boards.
Insightful. Shipping might have loosened connectors between hashing boards and controller, might be the PSU too. I would try to open it and tighten every power/data connectors in sight. If hardware issues were to be ruled out (although it seems suspect as quoted above), you may want to try to proxy the connection through a stratum proxy for debugging purpose (or even netcat to debug at TCP level). I assume you've tried other pools already? Using pool IP address instead of hostname would also rule out DNS problems (unlikely IMO).
Doesn't look wrong at first glance... Post screenshots of other sections
The other sections show nothing of interest. "Test Status" is blank, and "statistics" just show it not hashing.
Controller doesn't see any boards.
suggested steps?
Doesn't look wrong at first glance... Post screenshots of other sections
The other sections show nothing of interest. "Test Status" is blank, and "statistics" just show it not hashing.
Controller doesn't see any boards.
Doesn't look wrong at first glance... Post screenshots of other sections
The other sections show nothing of interest. "Test Status" is blank, and "statistics" just show it not hashing.
What makes you think it is a config problem rather than a hardware issue? Did it work previously?
Well, it is a demo unit from someone I trust a good deal, so I take hit word that it was functional upon shipping.
What makes you think it is a config problem rather than a hardware issue? Did it work previously?
Doesn't look wrong at first glance... Post screenshots of other sections
.1 BTC to the first person who can:
1) Tell me what is wrong with my current configuration
2) Tell me how to fix it
3) Get the damn thing mining!
thanks!
picture:
1) Tell me what is wrong with my current configuration
2) Tell me how to fix it
3) Get the damn thing mining!
thanks!
picture:
Jump to: