Brand new D3 multiple errors | Bitcointalksearch.org

chapsmx

newbie

Activity: 14

Merit: 0

Quote from: ikon31 on December 28, 2017, 02:21:36 PM

Anyone alse? Huh

same problem here.
hashing board #3 is full of hw errors and after two minutes working all the ooo turnt to xxx and the front led blinks in red.
hashing board #2 has minor hw errors and some times it dissapears from the control panel
i opened a ticket at bitmain and after upgrading the firmware and doing some tests as suggested had to sent back the two hashing boards to warranty.

Sandal_Hat

full member

Activity: 462

Merit: 118

Quote from: ikon31 on December 28, 2017, 02:21:36 PM

yes i mean the hashboards.

Not zeros just vanished.

It displays only one hashboard.

I saw a couple of days your post and changed the Ethernet cable.

tried different controller cables.

Did hard reset around 3 times and flash the new firmware.

No luck.

The only thing i didn't try is to change PSU(i use bitmain`s original apw3++ psu)

I will receive 8 new ones this Saturday and i will try this step as well.

Anyone alse? Huh

I see. I guess yours is a different issue. For me, i changed a right angled ethernet cable from a certain manufacturer to normal ethernet cable from a different manufacturer and the hashboard appeared. Worked for a few of us here.

Hope the PSU does it for u man. It would still suck a little but psu is still far cheaper than a board problem lol.

ikon31

member

Activity: 85

Merit: 11

yes i mean the hashboards.

Not zeros just vanished.

It displays only one hashboard.

I saw a couple of days your post and changed the Ethernet cable.

tried different controller cables.

Did hard reset around 3 times and flash the new firmware.

No luck.

The only thing i didn't try is to change PSU(i use bitmain`s original apw3++ psu)

I will receive 8 new ones this Saturday and i will try this step as well.

Anyone alse? Huh

Sandal_Hat

full member

Activity: 462

Merit: 118

When u say 3 blades, u mean the hashboard 000000 ?
First thing is to reset the machine of course.
I had a hashboard on my S9 go missing and apparently changing ethernet cable to a better quality one fixed it after a reset.

Not sure about D3 but might be the same. U can check some of my posts. It has worked for others as well. It could also be something else of course.

ikon31

member

Activity: 85

Merit: 11

Hi you all,

I wish you all happy mining

I want to ask the forum about my 19.3ghs brand new d3.

I just plug it in and it worked(mined in f2pool) for only a day.

Then one hashboard disappeared(status page) and the total hashrate was around 13ghs.
Then i read some advice on bitmain website and update the firmware with the new one. Nothing happend and instead of that a couple of days later the second blade disappeared(status page) and the total hashrate is around 6ghs.

ALL that time the power consumption is 1200watt which i believe that all 3 blades are working otherwise it should be on 1/3rd of power consumption like my s9 which works with two blades and consums 2/3rd of wattage and delivers 2/3rd of total speed. Shouldnt be like that?

And lastly i have ALL THE TIME since the beggining red light ON THE CONTROLLER. Shouldent be green? On the top of the controller NOT at the back where the ethernet cable and reset button side.

It sounds to me that it is software problem because of the total 1200 consuption or even broken controller but NOT BROKEN blades.

What do you say?

Can it be done/fixed???

Thank you for your time and sorry for my bad english.

Topic: Brand new D3 multiple errors (Read 157 times)