Topic: BTC in electrum (Read 252 times)
do you see familiar addresses on the addresses tab?
Hello,
I still have nothing as information or as btc.
The history is empty while I made transactions.
In electrum, in information wallet, available seed: false
I have selected legacy.
Thanks for your help
so, your address begin with 1 as legacy, are you put 24 seed and gui open? I still have nothing as information or as btc.
The history is empty while I made transactions.
In electrum, in information wallet, available seed: false
I have selected legacy.
Thanks for your help
what electrum version?
when open your balance 0 no history.
are your internet conection available?
i thing the problem is internet conection and sync your electrum.
Hello,
I still have nothing as information or as btc.
The history is empty while I made transactions.
In electrum, in information wallet, available seed: false
I have selected legacy.
Thanks for your help
I still have nothing as information or as btc.
The history is empty while I made transactions.
In electrum, in information wallet, available seed: false
I have selected legacy.
Thanks for your help
Hello,
Thank you all for your answers and help.
It's legacy adress and i have select native segwit.
Thank you all for your answers and help.
How does your wallet address looks, I mean is it started with 1 (legacy), 3 (p2sh/nested), or bc1 (native)? Coz it will differ with the derivation path if you have the address that start with 3 and bc1.
Options you should considered to choose when you import your 24 seed on electrum if your wallet address have this initials.
Options you should considered to choose when you import your 24 seed on electrum if your wallet address have this initials.
- 1 = legacy(p2pkh)
- 3 = p2sh-segwit (pwpkh-p2sh)
- bc1 = native segwit (p2wpkh)
It's legacy adress and i have select native segwit.
That's the problem. If your address is legacy, select legacy.
And please consider sending all your legacy to segwit.
You still haven't resolved this?
Not yet. I am on a business trip. I tried what I was advised but still 0 and no history. I ordered another ledger. I'll keep you informed.
You still haven't resolved this?
Green Dot (connected), correct addresses and no history... that's weird.
BTW, First (your reply to bL4nkcode) and Last (your reply to me) responses were inconsistent.
Is the "block_headers" file in the %appdata%/electrum folder's size is greater than 44mb?
If it still isn't, just leave your Electrum open for a couple of minutes or an hour specially if your internet is too slow.
Also, you said about "don't know when you've lost your Ledger"... Was this before January-March 2018?
If it was, what kind of "Bitcoin" was deposited in your Ledger? Bitcoin [BTC] or Bitcoin Cash [BCH]?
Electrum only supports Bitcoin [BTC].
BTW, First (your reply to bL4nkcode) and Last (your reply to me) responses were inconsistent.
Is the "block_headers" file in the %appdata%/electrum folder's size is greater than 44mb?
If it still isn't, just leave your Electrum open for a couple of minutes or an hour specially if your internet is too slow.
Also, you said about "don't know when you've lost your Ledger"... Was this before January-March 2018?
If it was, what kind of "Bitcoin" was deposited in your Ledger? Bitcoin [BTC] or Bitcoin Cash [BCH]?
Electrum only supports Bitcoin [BTC].
Thanks for your anwser
The size of this file is 44429 Ko and the last modification is today.
I have lost my leder this month. Ther is only BTC
Thanks for your time and your help
Green Dot (connected), correct addresses and no history... that's weird.
BTW, First (your reply to bL4nkcode) and Last (your reply to me) responses were inconsistent.
Is the "block_headers" file in the %appdata%/electrum folder's size is greater than 44mb?
If it still isn't, just leave your Electrum open for a couple of minutes or an hour specially if your internet is too slow.
Also, you said about "don't know when you've lost your Ledger"... Was this before January-March 2018?
If it was, what kind of "Bitcoin" was deposited in your Ledger? Bitcoin [BTC] or Bitcoin Cash [BCH]?
Electrum only supports Bitcoin [BTC].
BTW, First (your reply to bL4nkcode) and Last (your reply to me) responses were inconsistent.
Is the "block_headers" file in the %appdata%/electrum folder's size is greater than 44mb?
If it still isn't, just leave your Electrum open for a couple of minutes or an hour specially if your internet is too slow.
Also, you said about "don't know when you've lost your Ledger"... Was this before January-March 2018?
If it was, what kind of "Bitcoin" was deposited in your Ledger? Bitcoin [BTC] or Bitcoin Cash [BCH]?
Electrum only supports Bitcoin [BTC].
Hello,
Thank you all for your answers and help.
It's legacy adress and i have select native segwit.
Electrum uses it's own seed system, so you need to explicitly select the BIP39 option to make it work with non-Electrum seeds.
Otherwise, do as bl4ankcode suggested... and make sure you're selecting the correct script type when restoring based on the address type that your Ledger was using.
Finally, make sure you are using the latest version of Electrum and that it is correctly synced (should have a green dot in the bottom right corner)... if it says "synchronising" with blue arrows, or you have a "red dot", it won't show your coins.
Yes i have select BIP39. Electrum version 3.3.4, green dot OK.
These are my addresses but with 0 and no history.
Thanks so much for your help
Thank you all for your answers and help.
How does your wallet address looks, I mean is it started with 1 (legacy), 3 (p2sh/nested), or bc1 (native)? Coz it will differ with the derivation path if you have the address that start with 3 and bc1.
Options you should considered to choose when you import your 24 seed on electrum if your wallet address have this initials.
Options you should considered to choose when you import your 24 seed on electrum if your wallet address have this initials.
- 1 = legacy(p2pkh)
- 3 = p2sh-segwit (pwpkh-p2sh)
- bc1 = native segwit (p2wpkh)
It's legacy adress and i have select native segwit.
I just realized that I lost my ledger. I do not know since when exactly.
I have a seed of 24 words. I put it in electrum but I do not see any bitcoin.
Is this normal? How to recover the bitcoins that are in this seed without ledger?
Did you click "Options" and then select "BIP39 Seed" when you were trying to restore in Electrum? I have a seed of 24 words. I put it in electrum but I do not see any bitcoin.
Is this normal? How to recover the bitcoins that are in this seed without ledger?
Electrum uses it's own seed system, so you need to explicitly select the BIP39 option to make it work with non-Electrum seeds.Otherwise, do as bl4ankcode suggested... and make sure you're selecting the correct script type when restoring based on the address type that your Ledger was using.
Finally, make sure you are using the latest version of Electrum and that it is correctly synced (should have a green dot in the bottom right corner)... if it says "synchronising" with blue arrows, or you have a "red dot", it won't show your coins.
Yes i have select BIP39. Electrum version 3.3.4, green dot OK.
Here's another:
First enable the "Address Tab" by clicking "View" then click "Show Addresses".
If the addresses in the list are correct, there's a bad news.
Is there's something in the transaction history that shouldn't be there, or there's none at all?
If there is, what version of Electrum did you installed and where did you downloaded it?
If there's none, do the above posts' instructions.
First enable the "Address Tab" by clicking "View" then click "Show Addresses".
If the addresses in the list are correct, there's a bad news.
Is there's something in the transaction history that shouldn't be there, or there's none at all?
If there is, what version of Electrum did you installed and where did you downloaded it?
If there's none, do the above posts' instructions.
These are my addresses but with 0 and no history.
Thanks so much for your help
Here's another:
First enable the "Address Tab" by clicking "View" then click "Show Addresses".
If the addresses in the list are correct, there's a bad news.
Is there's something in the transaction history that shouldn't be there, or there's none at all?
If there is, what version of Electrum did you installed and where did you downloaded it?
If there's none, do the above posts' instructions.
First enable the "Address Tab" by clicking "View" then click "Show Addresses".
If the addresses in the list are correct, there's a bad news.
Is there's something in the transaction history that shouldn't be there, or there's none at all?
If there is, what version of Electrum did you installed and where did you downloaded it?
If there's none, do the above posts' instructions.
I have a seed of 24 words. I put it in electrum but I do not see any bitcoin.
You did wrong when importing your seed to your Electrum wallet that is why you can't see your bitcoin inside the electrum wallet.
You should know first if your wallet from ledger is segwit address or a legacy wallet if it's a segwit wallet you must put the derivation path to /m/49'/0'/0' instead of /m/44'/0'/0' when setup. If you did this correctly it should show your funds in Electrum but if still not make sure that you are using the latest version of Electrum because according to electrum.org "Electrum versions older than 3.3 can no longer connect to public servers, and must be upgraded"
The current version of Electrum is Electrum-3.3.4 so you must use the latest version of Electrum.
I just realized that I lost my ledger. I do not know since when exactly.
I have a seed of 24 words. I put it in electrum but I do not see any bitcoin.
Is this normal? How to recover the bitcoins that are in this seed without ledger?
Did you click "Options" and then select "BIP39 Seed" when you were trying to restore in Electrum? I have a seed of 24 words. I put it in electrum but I do not see any bitcoin.
Is this normal? How to recover the bitcoins that are in this seed without ledger?
Electrum uses it's own seed system, so you need to explicitly select the BIP39 option to make it work with non-Electrum seeds.Otherwise, do as bl4ankcode suggested... and make sure you're selecting the correct script type when restoring based on the address type that your Ledger was using.
Finally, make sure you are using the latest version of Electrum and that it is correctly synced (should have a green dot in the bottom right corner)... if it says "synchronising" with blue arrows, or you have a "red dot", it won't show your coins.
How does your wallet address looks, I mean is it started with 1 (legacy), 3 (p2sh/nested), or bc1 (native)? Coz it will differ with the derivation path if you have the address that start with 3 and bc1.
Options you should considered to choose when you import your 24 seed on electrum if your wallet address have this initials.
Options you should considered to choose when you import your 24 seed on electrum if your wallet address have this initials.
- 1 = legacy(p2pkh)
- 3 = p2sh-segwit (pwpkh-p2sh)
- bc1 = native segwit (p2wpkh)
Hello,
I just realized that I lost my ledger. I do not know since when exactly.
I have a seed of 24 words. I put it in electrum but I do not see any bitcoin.
Is this normal? How to recover the bitcoins that are in this seed without ledger?
I would like, for security reasons, to transfer them to another BTC address while waiting to order another legder.
Thanks for your help.
I just realized that I lost my ledger. I do not know since when exactly.
I have a seed of 24 words. I put it in electrum but I do not see any bitcoin.
Is this normal? How to recover the bitcoins that are in this seed without ledger?
I would like, for security reasons, to transfer them to another BTC address while waiting to order another legder.
Thanks for your help.
Jump to: