BUILD LOG - 4 5970's on MSI 890FXA-GD70

nelisky

legendary

Activity: 1540

Merit: 1002

Quote from: Mousepotato on December 13, 2011, 11:14:24 AM

FWIW, I have an AMD OEM 5970 and it's ok at OC'ing I guess. I set mine at 905/200/1.149v and get about 412-414 MH/s per core (824-828 MH/s total) with temps on GPU2 at 83C, air cooled. I can crack 850 MH/s but temps are around 90C with VRM temps over 110C Shocked

Do you have power consumption figures to go with that?

Mousepotato

hero member

Activity: 896

Merit: 1000

Seal Cub Clubbing Club

Quote from: Transisto on December 13, 2011, 02:40:06 AM

What brand of HD5970 did you get ?

I'm having trouble OCing with Diamond's one. (newegg)

FWIW, I have an AMD OEM 5970 and it's ok at OC'ing I guess. I set mine at 905/200/1.149v and get about 412-414 MH/s per core (824-828 MH/s total) with temps on GPU2 at 83C, air cooled. I can crack 850 MH/s but temps are around 90C with VRM temps over 110C Shocked

grubles

full member

Activity: 180

Merit: 100

mistaken for gribble since 2011

Quote from: Transisto on December 13, 2011, 02:40:06 AM

What brand of HD5970 did you get ?

I'm having trouble OCing with Diamond's one. (newegg)

Who would've thought that the cheapest 5970s aren't quality ones...

Transisto

donator

Activity: 1731

Merit: 1008

What brand of HD5970 did you get ?

I'm having trouble OCing with Diamond's one. (newegg)

Remember remember the 5th of November

legendary

Activity: 1862

Merit: 1011

Reverse engineer from time to time

That board is bad, even though you would be using a low powered CPU, if in the future want to use the mobo, and decide to OC, it's VRMs fail immediately, especially on thubans.

grubles

full member

Activity: 180

Merit: 100

mistaken for gribble since 2011

I have 5 5970s for sale if you still needed the cards.

CleverMiner

member

Activity: 66

Merit: 10

Quote from: jjshabadoo on December 06, 2011, 03:18:36 PM

I'll post some pics and follow up thoughts on the process, hash rates, settings, etc.

I'm really interested in this,

Do the ram and vrm pads need to be changed because they are bad or only because you've unseated them to change the TIM on the GPUs ?

I used to add AC MX-3 over thermal pads before replacing the heatsink, would that suffice ?

What I have plan for 4x 5970 is to remove the IO grill at the back and merge the four exause into a 120mm tunnel where I would place a 22w FAN, and maybe route that how ait further away for other uses.

plastic.elastic

full member

Activity: 168

Merit: 100

Quote from: jjshabadoo on December 06, 2011, 03:20:18 PM

Quick question to those who have replaced the stock thermal material on 5970's. Did you replace ALL of the thermal pads, or just the small ram pads. Also, did you replace the thermal pads on the backplate and if so, did you use 1mm or .5 mm ?

All thermal pads must be replaced.

1.0mm for the ram, 0.5mm for the VRM

jjshabadoo

hero member

Activity: 535

Merit: 500

Quick question to those who have replaced the stock thermal material on 5970's. Did you replace ALL of the thermal pads, or just the small ram pads. Also, did you replace the thermal pads on the backplate and if so, did you use 1mm or .5 mm ?

jjshabadoo

hero member

Activity: 535

Merit: 500

So I am planning on upgrading my mining rigs to have 4 5970's on each rig. Of course we are making a custom case to accommodate the 5970's with pci x16 molex powered extenders from cablesaurus.com

Here is my equipment list:

MSI 890FXA-GD70
AMD sempron 145
2X1gb DDR3 1066 ram
crucial 16gb flash drive with linuxcoin and cgminer
2 x 750w Seasonic gold PSU's daisy chained with 24 pin Dual power connector
4 x ATI 5970 video cards

I am also planning on re-doing the thermal paste on all of the GPU's with Shin-Etsu X23-7783D Silicone thermal compound and phobya 1mm thermal pads. Since I plan to air cool and get the best overclock I can, I felt it best to re-do the thermal materials.

I'll post some pics and follow up thoughts on the process, hash rates, settings, etc.

Topic: BUILD LOG - 4 5970's on MSI 890FXA-GD70 (Read 2090 times)