i know for windows i had to install drivers for the eruptors do i need drivers for them on the Mac?
Yes, and they are available on the same SILabs drivers page as the windows drivers.
Topic: Can anyone help with a mac mini .... please! (Read 1385 times)
Yes, and they are available on the same SILabs drivers page as the windows drivers.
i know for windows i had to install drivers for the eruptors do i need drivers for them on the Mac?
Same commandline parameters as windows, but in both windows and Mac, it's best to use the builtin config file functionality once you set it up including pools, etc rather than launching with all those parameters everytime from a batch file.
You launch typically by going to where you put the binaries and ./bfgminer -S erupter:all
You launch typically by going to where you put the binaries and ./bfgminer -S erupter:all
If you don't want to compile from home brew, you can download the binaries from here: https://github.com/nwoolls/xgminer-osx/releases
Check the read me for instructions.
Check the read me for instructions.
Thank you
now how do i run it in mac?
i know how it works in windows and setup a batch file any instructions on how to do that in mac?
If you don't want to compile from home brew, you can download the binaries from here: https://github.com/nwoolls/xgminer-osx/releases
Check the read me for instructions.
Check the read me for instructions.
i am not trying to hijack the thread but i would like to get my usb running of my mac mini
how do i install bfgminer on the mac mini
can someone post instructions
Thanks
how do i install bfgminer on the mac mini
can someone post instructions
Thanks
Attach another hub between the Mac Mini and all the Ankers... but here's the important bit, make sure the in-between hub is a USB2 Powered hub. That should get it working for you.
I have 45 BE's running on 5 Anker/AITech Hubs + fans all connected through a 12 Port USB2 Powered hub back to my Mac Pro. Only one USB connection is used on my Mac. All working fine.
Direct USB3 from the Ankers are a bit iffy when you connect multiple to the Mac, and it works much better through a central USB2 Powered Hub, then you can connect almost as many Ankers as you want.
I have 45 BE's running on 5 Anker/AITech Hubs + fans all connected through a 12 Port USB2 Powered hub back to my Mac Pro. Only one USB connection is used on my Mac. All working fine.
Direct USB3 from the Ankers are a bit iffy when you connect multiple to the Mac, and it works much better through a central USB2 Powered Hub, then you can connect almost as many Ankers as you want.
Thanks for your suggestion. I'll pick up a USB 2.0 powered hub and give it a try.
Here's a video of my setup: http://youtu.be/v42QBx2UP54
If you notice I have the 12 port USB2 hub attached to the wall behind the drobo.
Attach another hub between the Mac Mini and all the Ankers... but here's the important bit, make sure the in-between hub is a USB2 Powered hub. That should get it working for you.
I have 45 BE's running on 5 Anker/AITech Hubs + fans all connected through a 12 Port USB2 Powered hub back to my Mac Pro. Only one USB connection is used on my Mac. All working fine.
Direct USB3 from the Ankers are a bit iffy when you connect multiple to the Mac, and it works much better through a central USB2 Powered Hub, then you can connect almost as many Ankers as you want.
I have 45 BE's running on 5 Anker/AITech Hubs + fans all connected through a 12 Port USB2 Powered hub back to my Mac Pro. Only one USB connection is used on my Mac. All working fine.
Direct USB3 from the Ankers are a bit iffy when you connect multiple to the Mac, and it works much better through a central USB2 Powered Hub, then you can connect almost as many Ankers as you want.
Thanks for your suggestion. I'll pick up a USB 2.0 powered hub and give it a try.
I tried to help but apparently you didn't try any of my suggestions. 
Good luck with your problem! Maybe someone else can help but it doesn't seem like people are flocking here to offer advice.
Good luck with your problem! Maybe someone else can help but it doesn't seem like people are flocking here to offer advice.
I didn't mean to ignore your suggestions but I already tried bitminter pool with the same results and have loaded the drivers for bfgminer and then removed then an tried cgminer. I've contacted Anker to see if they have any suggestions but I have 5 of their USB hubs and they all seem to be working the same.
Attach another hub between the Mac Mini and all the Ankers... but here's the important bit, make sure the in-between hub is a USB2 Powered hub. That should get it working for you.
I have 45 BE's running on 5 Anker/AITech Hubs + fans all connected through a 12 Port USB2 Powered hub back to my Mac Pro. Only one USB connection is used on my Mac. All working fine.
Direct USB3 from the Ankers are a bit iffy when you connect multiple to the Mac, and it works much better through a central USB2 Powered Hub, then you can connect almost as many Ankers as you want.
I have 45 BE's running on 5 Anker/AITech Hubs + fans all connected through a 12 Port USB2 Powered hub back to my Mac Pro. Only one USB connection is used on my Mac. All working fine.
Direct USB3 from the Ankers are a bit iffy when you connect multiple to the Mac, and it works much better through a central USB2 Powered Hub, then you can connect almost as many Ankers as you want.
I tried to help but apparently you didn't try any of my suggestions.
Good luck with your problem! Maybe someone else can help but it doesn't seem like people are flocking here to offer advice.
Good luck with your problem! Maybe someone else can help but it doesn't seem like people are flocking here to offer advice.
This is what continues to happen unplug and restart and different lights come on but never all of them.
Can you test on a PC? Are these new hubs? What miner are you using? Do you have the USB to uArt drivers installed?
Some suggestions...
- Try Bitminter pool. It's a java miner that you download right from the site. It is the easiest miner to get USB Erupters up and running. And it's a great pool!
- Often times the power supplies go bad on the Ankers. Switch around the power connectors with a working hub and a non-working hub. That way you can tell if you have a bad power supply.
- The proper drivers are here... http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx Although I'm not sure if they are Mac compatible.
- Lastly, test on a PC if you can. I can't understand why a brand new Mac Mini doesn't seem to work. It certainly should. But it's worth a try.
Some suggestions...
- Try Bitminter pool. It's a java miner that you download right from the site. It is the easiest miner to get USB Erupters up and running. And it's a great pool!
- Often times the power supplies go bad on the Ankers. Switch around the power connectors with a working hub and a non-working hub. That way you can tell if you have a bad power supply.
- The proper drivers are here... http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx Although I'm not sure if they are Mac compatible.
- Lastly, test on a PC if you can. I can't understand why a brand new Mac Mini doesn't seem to work. It certainly should. But it's worth a try.
I've asked in a few different locations in the forum and can't get any help.
I have a new mac mini with 4 Anker 9+1 USB hubs. One connected to each USB hub in the back of the mini. I can't get more then 15 ASICminers working. I've tried connecting each Anker one by one. I get 9 on the first one and 6 on the second and nothing more. If I connect a third and add ASICMiners blue light doesn't come on and the computer doesn't recognize it.
I've tried installing the Anker USB hubs in so many way but still can't get more then 15 miners showing up. Does anyone know if this is a OSX limitation or is it the USB Hub?
I'm ready to give up!
I have a new mac mini with 4 Anker 9+1 USB hubs. One connected to each USB hub in the back of the mini. I can't get more then 15 ASICminers working. I've tried connecting each Anker one by one. I get 9 on the first one and 6 on the second and nothing more. If I connect a third and add ASICMiners blue light doesn't come on and the computer doesn't recognize it.
I've tried installing the Anker USB hubs in so many way but still can't get more then 15 miners showing up. Does anyone know if this is a OSX limitation or is it the USB Hub?
I'm ready to give up!
Jump to: