Wil give this a try and see how it works out for me. Thanks!
If this is just about need to control frequency and fan speed manually, then you can try my trick that I have posted earlier in the S9 and R4 threads 
:
:This was done with R4. I have no autotune S9 to test it.
This is also S9 related, so I thought to share this here as well.
If there is someone with a desire for non-autotune settings, be brave and please report if you get same results as I had
Originally posted in the R4 thread https://bitcointalksearch.org/topic/m.18267781
If there is someone with a desire for non-autotune settings, be brave and please report if you get same results as I had
Originally posted in the R4 thread https://bitcointalksearch.org/topic/m.18267781
Well, this is an interesting find and I thought I'll share it with you.
I had a problem booting my Antminer R4 8.0 Th/s, batch 2, autotune-model.
So I went looking in here:
Bitmain.com: Three Ways to Restore Factory Settings (R4/S9/T9)
https://enforum.bitmain.com/bbs/topics/3957
I used the last option in the list, IP Reporter button restore.
My miner restored with firmware Aug. 9 2016 and autotune settings were gone.
I am now suddenly able to control frequency and custom fan settings.
This was not my original problem, but I'm happy with it.
My original problem was that the miner jammed somehow in the booting process and didn't even show up in my router ip list.
I had a problem booting my Antminer R4 8.0 Th/s, batch 2, autotune-model.
So I went looking in here:
Bitmain.com: Three Ways to Restore Factory Settings (R4/S9/T9)
https://enforum.bitmain.com/bbs/topics/3957
I used the last option in the list, IP Reporter button restore.
Quote from: Bitmain
Usage: Please power off the miner, then hold down the IP Reporter and don’t release it. At the same time, please power on the miner.
Releasing the IP Reporter after 5 seconds, the machine will automatically restore factory settings.
Releasing the IP Reporter after 5 seconds, the machine will automatically restore factory settings.
My miner restored with firmware Aug. 9 2016 and autotune settings were gone.
I am now suddenly able to control frequency and custom fan settings.
This was not my original problem, but I'm happy with it.
My original problem was that the miner jammed somehow in the booting process and didn't even show up in my router ip list.
