Topic: Can you please help me in this? (Read 86 times)
Set Win10 Sleep mode to disabled and its running smoothly for the last 11.5 hours. So it was just a petty thing that was giving big headache!
Hi,
Thats what happening:
Claymore run for couple of hours and then the GPUs gets off and when I click mouse the GPUs gets alive but Windows stuck.
My env:
HX1200i / H81 / 2x RX 580 Factory OCed, Not under-volted, Not modded/ Virtual Memory: 16GB
GPUs status: t=~62C / fan=~58%
Hash rate: >26 for each GPU
Afterburner settings:
Core Voltage (mV): stock, 0
Power Limit: stock, +0
Temp. Limit: 85C
Core Clock: 1300MHz
Memory Clock: 2100MHz
Fan Speed: 45%
Claymore .bat:
timeout /t 15
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ethdcrminer64.exe -epool eth-asia1.nanopool.org:9999 -ewal 0xa0467c88d8a6955b1653aeed9973f757bbb0585a/RIG01 -epsw x -mode 1 -allpools 1 -r 1 -tstop 85 -gser 2 -eres 0
Can you please help what does the log depicts:
Latest log excerpts:
18:50:05:648 67c Socket was closed remotely (by pool)
18:50:34:725 728 em hbt: 29047, fm hbt: 0,
18:51:36:427 67c ETH: Connection lost, retry in 20 sec...
18:51:36:247 728 watchdog - thread 0 (gpu0), hb time 90813
18:51:39:052 728 WATCHDOG: GPU 0 hangs in OpenCL call, exit
18:51:39:052 728 watchdog - thread 1 (gpu0), hb time 93469
18:51:39:052 728 WATCHDOG: GPU 0 hangs in OpenCL call, exit
18:51:39:068 728 watchdog - thread 2 (gpu1), hb time 93672
18:51:39:068 728 WATCHDOG: GPU 1 hangs in OpenCL call, exit
18:51:39:068 728 watchdog - thread 3 (gpu1), hb time 93484
18:51:39:068 728 WATCHDOG: GPU 1 hangs in OpenCL call, exit
18:51:39:068 728 Rebooting
Prior to latest excerpts:
17:01:43:415 1450 Platform: Windows
17:01:43:446 1450 start building OpenCL program for GPU 0...
17:02:15:885 d98
17:02:48:699 d98
17:03:21:512 d98
17:03:54:326 d98
17:04:27:140 d98
17:04:59:954 d98
17:05:32:768 d98
17:06:05:582 d98
17:06:38:384 d98
17:07:10:791 d98
17:07:10:791 d98 Miner cannot initialize for 5 minutes, need to restart miner!
17:07:10:791 d98 Rebooting
17:07:10:853 d98 ADL: Cannot find any AMD adapters
Thanking you in anticipation and looking forward.
Regards,
Rizwan
Thats what happening:
Claymore run for couple of hours and then the GPUs gets off and when I click mouse the GPUs gets alive but Windows stuck.
My env:
HX1200i / H81 / 2x RX 580 Factory OCed, Not under-volted, Not modded/ Virtual Memory: 16GB
GPUs status: t=~62C / fan=~58%
Hash rate: >26 for each GPU
Afterburner settings:
Core Voltage (mV): stock, 0
Power Limit: stock, +0
Temp. Limit: 85C
Core Clock: 1300MHz
Memory Clock: 2100MHz
Fan Speed: 45%
Claymore .bat:
timeout /t 15
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ethdcrminer64.exe -epool eth-asia1.nanopool.org:9999 -ewal 0xa0467c88d8a6955b1653aeed9973f757bbb0585a/RIG01 -epsw x -mode 1 -allpools 1 -r 1 -tstop 85 -gser 2 -eres 0
Can you please help what does the log depicts:
Latest log excerpts:
18:50:05:648 67c Socket was closed remotely (by pool)
18:50:34:725 728 em hbt: 29047, fm hbt: 0,
18:51:36:427 67c ETH: Connection lost, retry in 20 sec...
18:51:36:247 728 watchdog - thread 0 (gpu0), hb time 90813
18:51:39:052 728 WATCHDOG: GPU 0 hangs in OpenCL call, exit
18:51:39:052 728 watchdog - thread 1 (gpu0), hb time 93469
18:51:39:052 728 WATCHDOG: GPU 0 hangs in OpenCL call, exit
18:51:39:068 728 watchdog - thread 2 (gpu1), hb time 93672
18:51:39:068 728 WATCHDOG: GPU 1 hangs in OpenCL call, exit
18:51:39:068 728 watchdog - thread 3 (gpu1), hb time 93484
18:51:39:068 728 WATCHDOG: GPU 1 hangs in OpenCL call, exit
18:51:39:068 728 Rebooting
Prior to latest excerpts:
17:01:43:415 1450 Platform: Windows
17:01:43:446 1450 start building OpenCL program for GPU 0...
17:02:15:885 d98
17:02:48:699 d98
17:03:21:512 d98
17:03:54:326 d98
17:04:27:140 d98
17:04:59:954 d98
17:05:32:768 d98
17:06:05:582 d98
17:06:38:384 d98
17:07:10:791 d98
17:07:10:791 d98 Miner cannot initialize for 5 minutes, need to restart miner!
17:07:10:791 d98 Rebooting
17:07:10:853 d98 ADL: Cannot find any AMD adapters
Thanking you in anticipation and looking forward.
Regards,
Rizwan
Jump to: