Just want to document that I solved this issue by replacing a bad USB cable.
Unbelievable ...but as simple as this seems check your cabling!
Best regards,
ripnoel
Topic: Cannot Get BFGMiner to see any of my Red Fury Miners ... (Read 764 times)
Greetings,
Brand new to all this so excuse my basic lack of knowledge. I have installed the latest version of Minepeon onto a new version of Raspberry Pi. I have gotten all of the SW updates run for Minepeon, and BFG miner. I have also setup a wireless connection as well as installed software for a addon LCD board mounted on top of my Raspberry Pi. BUT, I cannot seem to get my software to see any of my Red Fury miners! No matter what I do all I see is this:
--------------------------------------------------
bfgminer version 3.10.0 - Started: [1970-01-01 00:00:29] - [ 0 days 00:28:52]
[M]anage devices [P]ool management Settings [D]isplay options [H]elp [Q]uit
Connected to stratum.btcguild.com diff 2 with stratum as user MinePeon_ManualDo
Block: ...0f9473c9 #293682 Diff:5.01G (35.84Ph/s) Started: [04:56:15]
ST:2 F:4 NB:5 AS:0 BW:[ 36/ 5 B/s] E:0.00 I: 0.00 BTC/hr BS:0
0 | 0.0/ 0.0/ 0.0 h/s | A:0 R:0+0(none) HW:0/none
--------------------------------------------------------------------------------
NO DEVICES FOUND: Press 'M' and '+' to add
When I try to add a miner using auto or all it cannot find my Red Fury miners. BTW, I have 3 miners plugged into a new 3amp USB2.0 hub. I have LEDs lighting up on all 3 miners. (I actually have a 4th miner but the LED never lite up on it so I am returning it today.
Do I need to install some sort of Linux driver so my software can be found? I am uber new to this and do not know where to turn or what to do next. Any help here greatly appreciated.
Best regards,
Rip
--------------------------------
I have now re-imaged the Minepeon image built for Raspberry Pi and re-installed this onto my SD card. Any suggestions as to what I can do to get either BFGminer or CGMiner to see these Red Fury USB miners would be GREATLY appreciated! Simply pointing me to help for this also Greatly appreciated! ripnoel
Brand new to all this so excuse my basic lack of knowledge. I have installed the latest version of Minepeon onto a new version of Raspberry Pi. I have gotten all of the SW updates run for Minepeon, and BFG miner. I have also setup a wireless connection as well as installed software for a addon LCD board mounted on top of my Raspberry Pi. BUT, I cannot seem to get my software to see any of my Red Fury miners! No matter what I do all I see is this:
--------------------------------------------------
bfgminer version 3.10.0 - Started: [1970-01-01 00:00:29] - [ 0 days 00:28:52]
[M]anage devices [P]ool management Settings [D]isplay options [H]elp [Q]uit
Connected to stratum.btcguild.com diff 2 with stratum as user MinePeon_ManualDo
Block: ...0f9473c9 #293682 Diff:5.01G (35.84Ph/s) Started: [04:56:15]
ST:2 F:4 NB:5 AS:0 BW:[ 36/ 5 B/s] E:0.00 I: 0.00 BTC/hr BS:0
0 | 0.0/ 0.0/ 0.0 h/s | A:0 R:0+0(none) HW:0/none
--------------------------------------------------------------------------------
NO DEVICES FOUND: Press 'M' and '+' to add
When I try to add a miner using auto or all it cannot find my Red Fury miners. BTW, I have 3 miners plugged into a new 3amp USB2.0 hub. I have LEDs lighting up on all 3 miners. (I actually have a 4th miner but the LED never lite up on it so I am returning it today.
Do I need to install some sort of Linux driver so my software can be found? I am uber new to this and do not know where to turn or what to do next. Any help here greatly appreciated.
Best regards,
Rip
--------------------------------
I have now re-imaged the Minepeon image built for Raspberry Pi and re-installed this onto my SD card. Any suggestions as to what I can do to get either BFGminer or CGMiner to see these Red Fury USB miners would be GREATLY appreciated! Simply pointing me to help for this also Greatly appreciated! ripnoel
Jump to: