Author

Topic: Can't access to TP-link MR3020 device (Read 1057 times)

legendary
Activity: 1190
Merit: 1000
February 01, 2016, 08:21:27 PM
#5
If ip scan tool fail, then you need to use serial console.

But, before that, i want to clear some matter first.
Do you had more than one network adapter on your PC? Like ethernet port & wireless port.
If yes, you need to disable the wireless adapter.
You did connect TL-MR3020 using lan cable to your pc right?

You will need to make serial adapter using CA42 & open your TL-MR3020 then add some pin on P1.
More info: http://wiki.openwrt.org/toh/tp-link/tl-mr3020



full member
Activity: 126
Merit: 100
February 01, 2016, 07:59:12 PM
#4
If you read vendor site
The DICE firmware is DHCP enabled
Quote
* For DICE version DHCP is enebled by default, when flashing from older technobit img DO NOT KEEP SETTINGS!!!!
so look in your router for tp-link
or use some IP_lan _scan tool
sr. member
Activity: 265
Merit: 250
February 01, 2016, 03:11:24 PM
#3
What is that fw? Where did you get it from? Should it work with your router? Some useful information please.
legendary
Activity: 1456
Merit: 1000
February 01, 2016, 02:42:50 PM
#2
I have install the OK_DICE firmware in my TP-link MR3020 device..after installation i can't enter my router by 192.168.0.99

what to do. and how to revers back into tplink original firmware..

I have tried both dhcp i mean dynamic and  static..no result...

now am afraid am do anything wrong...and brick the device..

after installation complete the device is powered on but i can't access it.

I understand that without assessing it i cant restore the original TL firmware

is there any other procedure to restore it..??


please give me a help

and very thanks for quick reply..

may be i did something wrong..



Thanks In Advanced

Fazle Rabbi
Bangladesh


I don't know a lot about that firmware, what miner are you trying to get it to work with?  What are you trying dynamic and static on? as it sounds like you cant get to tp device.... so not sure what your changing it on.

But if you truly bricked it might need recovered via serial.  You might need to get a usb to serial cable, and do a little googling.  But it should be recoverable.
newbie
Activity: 1
Merit: 0
February 01, 2016, 02:31:00 PM
#1
I have install the OK_DICE firmware in my TP-link MR3020 device..after installation i can't enter my router by 192.168.0.99

what to do. and how to revers back into tplink original firmware..

I have tried both dhcp i mean dynamic and  static..no result...

now am afraid am do anything wrong...and brick the device..

after installation complete the device is powered on but i can't access it.

I understand that without assessing it i cant restore the original TL firmware

is there any other procedure to restore it..??


please give me a help

and very thanks for quick reply..

may be i did something wrong..



Thanks In Advanced

Fazle Rabbi
Bangladesh
Jump to: