Topic: Can't connect Antminer S1 to Pool/Internet - Will tip $10 if someone resolves (Read 1855 times)
April 01, 2014, 11:29:37 AM
I had issues with my Airport Apple router... It wouldn't accept the miner as a connection of any sort... So I had to set up a second one, using an old Netgear router... So if you have an Airport, that might be a problem as well.
April 01, 2014, 10:27:14 AM
You don't want to connect your miner directly to your computer. The only time you will do that is when you are initially setting it up - and even then this isn't necessary.
Assuming your local network is 192.168.1.*, all you have to do is plug your miner into your router. You can then connect to it wirelessly from your computer to do the setup. If your network is not 192.168.1.*, then you've got a couple choices. First, you can try plugging the miner directly into your computer via network cable. Assuming you can see it, you can configure it. If you can't see it, you can either change the IP configuration of your computer, or log into your router and change your IP configuration there to use the 192.168.1.*.
Hope this helps.
Assuming your local network is 192.168.1.*, all you have to do is plug your miner into your router. You can then connect to it wirelessly from your computer to do the setup. If your network is not 192.168.1.*, then you've got a couple choices. First, you can try plugging the miner directly into your computer via network cable. Assuming you can see it, you can configure it. If you can't see it, you can either change the IP configuration of your computer, or log into your router and change your IP configuration there to use the 192.168.1.*.
Hope this helps.
April 01, 2014, 09:55:29 AM
Hi,
Did you try to upgrade firmware?
Did you try to upgrade firmware?
April 01, 2014, 03:42:33 AM
>If I disable my wifi, how will I connect to the internet?
Ethernet cable from your Antminer to the Router.
Ethernet cable from your Antminer to the Router.
Oh, do you have to go through your router? You can't connect directly to your PC?
If you have it connected to your pc and your pc is connected via wifi to the net, you could do it that way, its a bit of a dirty fix..
On Win7 Network and sharing center choose Change adapter setting select your network and right click on bridge connections.
That should work.. It really is a stupid way of doing it though.
search for dogies guide on here and read it again...
April 01, 2014, 01:10:50 AM
Try making the DNS 8.8.8.8 and/or deleting the IPv4 broadcast. I think it's the DNS server because of the ping fail..
Also make sure wifi is disabled, that one screwed with me for so long
Also make sure wifi is disabled, that one screwed with me for so long
I tried making DNS 8.8.8.8 and blank. Did work. I can connect to my miner just fine. I can't get the miner to connect to the internet to start mining. If I disable my wifi, how will I connect to the internet?
I already tried a factory reset. Didn't work.
April 01, 2014, 01:08:15 AM
>If I disable my wifi, how will I connect to the internet?
Ethernet cable from your Antminer to the Router.
Ethernet cable from your Antminer to the Router.
Oh, do you have to go through your router? You can't connect directly to your PC?
April 01, 2014, 01:06:21 AM
>If I disable my wifi, how will I connect to the internet?
Ethernet cable from your Antminer to the Router.
Ethernet cable from your Antminer to the Router.
April 01, 2014, 12:59:32 AM
Try making the DNS 8.8.8.8 and/or deleting the IPv4 broadcast. I think it's the DNS server because of the ping fail..
Also make sure wifi is disabled, that one screwed with me for so long
Also make sure wifi is disabled, that one screwed with me for so long
I tried making DNS 8.8.8.8 and blank. Did work. I can connect to my miner just fine. I can't get the miner to connect to the internet to start mining. If I disable my wifi, how will I connect to the internet?
I already tried a factory reset. Didn't work.
April 01, 2014, 12:40:06 AM
Try making the DNS 8.8.8.8 and/or deleting the IPv4 broadcast. I think it's the DNS server because of the ping fail..
Also make sure wifi is disabled, that one screwed with me for so long
Also make sure wifi is disabled, that one screwed with me for so long
April 01, 2014, 12:37:47 AM
Maybe try pressing the reset button on it? Reset to factory default settings.
April 01, 2014, 12:32:08 AM
I have been struggling with connecting my miner for while now. I connected to the Antminer just fine through an ethernet cable. I can't get it to connect to the internet though. I've done several factory resets, used different PCs, different internet routers/ISPs, and turned off my firewall. The person who sold it to me on eBay said they checked it before they shipped it. Any other suggestions? Here is an album with many of my settings and status: https://imgur.com/a/9EK94
If someone can help me through this, I will gladly tip them $10 worth of Bitcoin as a thank you.
Thanks!
If someone can help me through this, I will gladly tip them $10 worth of Bitcoin as a thank you.
Thanks!
Jump to: