getting 28-29mh/s with bloack chain drivers, looking to pull at least 30
I copy the timing from 2:1750 for 2:2000 & 2:2250
any other jumps ?
Topic: Can't find modded bios for RX 580 Nitro+ 8GB Special edition (Read 933 times)
hero member
Activity: 584
Merit: 500
Colo - PBX - Server - IPv4 Broker - RemotePC - VPN
Thank you man, I have just 1 more question for you. When I go to the tabs where I can modify straps, there are 2 tabs, the first one there is a code and then a "(SAMSUNG)" and the last straps is "2000". The second tab there another code and straps again until "2250". Which straps I should modify, in the first tab or in the second one?
Check in GPU-Z about your card's memory manufacturer and edit only the type you have. Any of the straps would work, try using 1500 and only flash higher ones if it is unstable or gives you a low hash rate.
I have same cards for test purposes, I got 32MH stable both from Claymore and eminer. I can send the rom.
Look that SS from https://github.com/ethash/eminer-release
Look that SS from https://github.com/ethash/eminer-release
The Polaris Bios modding guide is two posts below yours.
https://bitcointalksearch.org/topic/guidetutorialxmrethhow-to-mod-bios-rx470570480580-vega-mining-1954245
I have the same Sapphire Nitro+ RX 580 8GB SE with the blue faceplate and Hynix memory. I get ~29.25 MH/s copying the 1750 MHz strap from the link below over the 2:1750, 2:2000 and 2:2250 timings.
https://bitcointalksearch.org/topic/m.21472867
Using Polaris Bios Editor v1.6, copy the 1750 MHz timing and replace the timing in 2:1750, 2:2000 and 2:2250 with that one. Save the Bios and flash it to the card with Atiwinflash.
https://github.com/jaschaknack/PolarisBiosEditor
https://bitcointalksearch.org/topic/guidetutorialxmrethhow-to-mod-bios-rx470570480580-vega-mining-1954245
I have the same Sapphire Nitro+ RX 580 8GB SE with the blue faceplate and Hynix memory. I get ~29.25 MH/s copying the 1750 MHz strap from the link below over the 2:1750, 2:2000 and 2:2250 timings.
https://bitcointalksearch.org/topic/m.21472867
Using Polaris Bios Editor v1.6, copy the 1750 MHz timing and replace the timing in 2:1750, 2:2000 and 2:2250 with that one. Save the Bios and flash it to the card with Atiwinflash.
https://github.com/jaschaknack/PolarisBiosEditor
Maybe I can explain better with images. I don't know which of them I need to modify.
This one:
https://imgur.com/a/SGZfz
or this one?
https://imgur.com/a/nEXfR
Thanks again in advance!
This one:
https://imgur.com/a/SGZfz
or this one?
https://imgur.com/a/nEXfR
Thanks again in advance!
Thank you man, I have just 1 more question for you. When I go to the tabs where I can modify straps, there are 2 tabs, the first one there is a code and then a "(SAMSUNG)" and the last straps is "2000". The second tab there another code and straps again until "2250". Which straps I should modify, in the first tab or in the second one?
I copy the timings from 1500 mhz and paste it where?
Paste it to the higher straps.
I copy the timings from 1500 mhz and paste it where?
Just create your own using SRBPolaris. Make a backup of the original bios, copy the timings from 1500MHz strap and flash it. If it is unstable or doesn't give a good hashrate - try a higher strap.
Hello everyone, Im trying to install a modded bios for my RX 580 Nitro+ 8GB Special edition for increase MH/s but I find modded bios just for RX 580 Nitro+ 8gb Limited edition. I searched in all entire google, but still no result. I found just this comment in a site: "I have the same card (Hynix memory) and had the same problems. The stock bios runs at 20mh/s. For this card you should use the 2:1750 strap from the Sapphire Nitro Plus RX580 8gb normal or limited edition and copy it under 2:2000 and 2:2250." Can someone explain me what he's saying or link me a working modded bios for my card? Thanks in advance. 
Jump to: