Screenshots of the best settings I've found so far.
https://i.imgur.com/tbPsCxd.jpg
https://i.imgur.com/aBVKsNp.jpg
https://i.imgur.com/LsUHzty.jpg
https://i.imgur.com/tbPsCxd.jpg
Topic: Cant get zotac 1060 6gb memory clock above 1199mhz and 16.75mh/s (Read 124 times)
Hi!
No matter how I OC my zotac 1060 6gb gpu I cannot get it to get above 1199mhz. I’ve used quick miner and the graphical miner. I use MSI afterburner. I’ve also used NiceHash miner OC Tune. I’ve also mined with lolminer and ethminer.
I’m hashing at about 16.50 mh/s on avg. I cannot get it above 16.75mh/s. I know it can get to 22-25mhz from YouTube videos and a friend with the same card. I’ve put in ALL the OC settings and GPU-Z will not show the memory clock going above 1199mhz.
I’m beginning to think it’s a bios or motherboard issue. I’m on a ASROCK b365m pro4.
Has anyone run in to the issue or know where I can go for help?
Thanks!
Set such settings in MSI afterburner.No matter how I OC my zotac 1060 6gb gpu I cannot get it to get above 1199mhz. I’ve used quick miner and the graphical miner. I use MSI afterburner. I’ve also used NiceHash miner OC Tune. I’ve also mined with lolminer and ethminer.
I’m hashing at about 16.50 mh/s on avg. I cannot get it above 16.75mh/s. I know it can get to 22-25mhz from YouTube videos and a friend with the same card. I’ve put in ALL the OC settings and GPU-Z will not show the memory clock going above 1199mhz.
I’m beginning to think it’s a bios or motherboard issue. I’m on a ASROCK b365m pro4.
Has anyone run in to the issue or know where I can go for help?
Thanks!
Power limit 116 (MAX)
Core frequency +50
Memory frequency +600 - 900
For testing, start at +600
You should get the following result.
Memory frequency +600 23 MH
Memory frequency +900 24-25 MH
over +900 is unnecessary overclocking
I just tried this and got 15.48mhs
Hi!
No matter how I OC my zotac 1060 6gb gpu I cannot get it to get above 1199mhz. I’ve used quick miner and the graphical miner. I use MSI afterburner. I’ve also used NiceHash miner OC Tune. I’ve also mined with lolminer and ethminer.
I’m hashing at about 16.50 mh/s on avg. I cannot get it above 16.75mh/s. I know it can get to 22-25mhz from YouTube videos and a friend with the same card. I’ve put in ALL the OC settings and GPU-Z will not show the memory clock going above 1199mhz.
I’m beginning to think it’s a bios or motherboard issue. I’m on a ASROCK b365m pro4.
Has anyone run in to the issue or know where I can go for help?
Thanks!
Set such settings in MSI afterburner.No matter how I OC my zotac 1060 6gb gpu I cannot get it to get above 1199mhz. I’ve used quick miner and the graphical miner. I use MSI afterburner. I’ve also used NiceHash miner OC Tune. I’ve also mined with lolminer and ethminer.
I’m hashing at about 16.50 mh/s on avg. I cannot get it above 16.75mh/s. I know it can get to 22-25mhz from YouTube videos and a friend with the same card. I’ve put in ALL the OC settings and GPU-Z will not show the memory clock going above 1199mhz.
I’m beginning to think it’s a bios or motherboard issue. I’m on a ASROCK b365m pro4.
Has anyone run in to the issue or know where I can go for help?
Thanks!
Power limit 116 (MAX)
Core frequency +50
Memory frequency +600 - 900
For testing, start at +600
You should get the following result.
Memory frequency +600 23 MH
Memory frequency +900 24-25 MH
over +900 is unnecessary overclocking
show your settings in afterburner and show us your gpu-z.
Your are using better mem timings? (--mt 1 - 6 with t-rex miner)
Ethminer is to slow and lolminer is not the best for nvidia. Use t-rex miner or nbminer with memtweak command and you will see you hashrate go up.
Your are using better mem timings? (--mt 1 - 6 with t-rex miner)
Ethminer is to slow and lolminer is not the best for nvidia. Use t-rex miner or nbminer with memtweak command and you will see you hashrate go up.
Micron
There must be a perfect settings for your gpu but that can only be possible if I know the exact memory type you have on the GPU, check GPU-Z once again and look the memory type, might be Samsung, Micron or hynix
Hi!
No matter how I OC my zotac 1060 6gb gpu I cannot get it to get above 1199mhz. I’ve used quick miner and the graphical miner. I use MSI afterburner. I’ve also used NiceHash miner OC Tune. I’ve also mined with lolminer and ethminer.
I’m hashing at about 16.50 mh/s on avg. I cannot get it above 16.75mh/s. I know it can get to 22-25mhz from YouTube videos and a friend with the same card. I’ve put in ALL the OC settings and GPU-Z will not show the memory clock going above 1199mhz.
I’m beginning to think it’s a bios or motherboard issue. I’m on a ASROCK b365m pro4.
Has anyone run in to the issue or know where I can go for help?
Thanks!
No matter how I OC my zotac 1060 6gb gpu I cannot get it to get above 1199mhz. I’ve used quick miner and the graphical miner. I use MSI afterburner. I’ve also used NiceHash miner OC Tune. I’ve also mined with lolminer and ethminer.
I’m hashing at about 16.50 mh/s on avg. I cannot get it above 16.75mh/s. I know it can get to 22-25mhz from YouTube videos and a friend with the same card. I’ve put in ALL the OC settings and GPU-Z will not show the memory clock going above 1199mhz.
I’m beginning to think it’s a bios or motherboard issue. I’m on a ASROCK b365m pro4.
Has anyone run in to the issue or know where I can go for help?
Thanks!
Jump to: