The compute capability of the 760 is only 3.0 according to https://developer.nvidia.com/cuda-gpus
I don't think any mining software still support that low :S
Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 987. (Read 2347601 times)
What's the problem with your 760 TheWolf? I think I missed that part 
No good software to mine with that I can find, well that does them justice.Most of these new coins the old miners will not work those and no one is keeping them updated that I can see.
What's the problem with your 760 TheWolf? I think I missed that part
Edit: I test 61 now without -l 16x24 to see what is better.
The -l 16x24 is only for the scrypt algorithm. Should not make any difference on lyra2v2
can you test release 60 on the gtx 960(lyra2v2)? Wich is the fastest?
61 is a little faster for me, 60 5831, 61 5860
r60 command line: -d 0 -l 16x24 --api-bind 0 --cpu-priority 2 --diff 2
r61: -d 0 -l 16x24 --api-bind 0 --cpu-priority 2 -i 19.4
Off topic but what is 10k of PXC worth these days?
Edit: I test 61 now without -l 16x24 to see what is better.
Edit2: Looks like I lose .005 to .008 without that line.
now .020 must put back lol
PHOENIXCOIN (PXC)--
A Neoscrypt coin, 10,000 PXC was worth 0.0088 BTC when I checked 5 minutes ago on Cryptsy. --scryptr
Thanks!
Hanging on maybe worth something some day. Lots of solo mining for those.
329936.83108882 PXC
can you test release 60 on the gtx 960(lyra2v2)? Wich is the fastest?
61 is a little faster for me, 60 5831, 61 5860
r60 command line: -d 0 -l 16x24 --api-bind 0 --cpu-priority 2 --diff 2
r61: -d 0 -l 16x24 --api-bind 0 --cpu-priority 2 -i 19.4
Off topic but what is 10k of PXC worth these days?
Edit: I test 61 now without -l 16x24 to see what is better.
Edit2: Looks like I lose .005 to .008 without that line.
now .020 must put back lol
PHOENIXCOIN (PXC)--
A Neoscrypt coin, 10,000 PXC was worth 0.0088 BTC when I checked 5 minutes ago on Cryptsy. --scryptr
can you test release 60 on the gtx 960(lyra2v2)? Wich is the fastest?
61 is a little faster for me, 60 5831, 61 5860
r60 command line: -d 0 -l 16x24 --api-bind 0 --cpu-priority 2 --diff 2
r61: -d 0 -l 16x24 --api-bind 0 --cpu-priority 2 -i 19.4
Off topic but what is 10k of PXC worth these days?
Edit: I test 61 now without -l 16x24 to see what is better.
Edit2: Looks like I lose .005 to .008 without that line.
now .020 must put back lol
Edit: again, any help to run my GTX760 on lyra2rev2?
also have 660Ti these older miner software just doesn't cut it anymore.
can you test release 60 on the gtx 960(lyra2v2)? Wich is the fastest?
Note takes 25 accepts and above to see top hash with R61, -X 15 out of memory on my 960 14.9 works 5835 h,
w/ no -i/-X set 5811
-i 19.4 is the sweet spots for my card and R61 gets best top hash 5860.
anything -i 19.7 or above get lower hash rate 19.9 out of memory.
All test where done with 100 or more accepts. Edit: Stock clocks on the GTX960 SSC. W7 64bit.
Algo: lyra2rev2
w/ no -i/-X set 5811
-i 19.4 is the sweet spots for my card and R61 gets best top hash 5860.
anything -i 19.7 or above get lower hash rate 19.9 out of memory.
All test where done with 100 or more accepts. Edit: Stock clocks on the GTX960 SSC. W7 64bit.
Algo: lyra2rev2
yes, it looks like the last quark commit is breaking the hashrate. I will take a look tonight after work.
Great improvements on all my 750 Ti's, thanks for the awesome work!
But you should check the results on the pool.
POOL RESULTS--
NiceHash pool results miniing Quark are ~20% less, although locally my 750ti cards report higher hash rates.
--scryptr
Great improvements on all my 750 Ti's, thanks for the awesome work!
But you should check the results on the pool.
I'm monitoring my hashrate on hashpower.co, it currently averages at about 70% the expected value.
Will keep it going for some more time to see if it's just bad luck.
Great improvements on all my 750 Ti's, thanks for the awesome work!
But you should check the results on the pool.
Nicehash seems to have problems, because all my rigs are showing a lower rate. With the new miner and the old miner. Perhaps another difficulty issue.
PS. With last commit any changes to --diif make only 50% nooo.
Great improvements on all my 750 Ti's, thanks for the awesome work!
But you should check the results on the pool.
Great improvements on all my 750 Ti's, thanks for the awesome work!
I have to show (GTX960 100me) Lyra2v2 --1.5.60(sp-MOD) 6005 Mh/s ,--1.5.61(sp-MOD) 5950 Mh/s.
Run with -X 15. I reduced the default intensity because one of my win8 rigs got out of memory.
I have to show (GTX960 100me) Lyra2v2 --1.5.60(sp-MOD) 6005 Mh/s ,--1.5.61(sp-MOD) 5950 Mh/s.
Miner show 50700 - on pool min 30, max 44. All time 36...
Looks like mine dropped to 28-45 now.. Will look into it.
Miner show 50700 - on pool min 30, max 44. All time 36...
Testing quark on nicehash - speed is down whith last commit...
PS. Try to recompile again and test.
PS. Try to recompile again and test.
I am running the exefile that I buildt(release 61). The miner shows 40MHASH in the client . The pool (nicehash.com) shows 35-45 MHASH as expected.
Jump to: