Topic: cgminer 3.1 wont start headless? (Read 1132 times)
did you find a way to solve this with software?
Yeah I'm hoping to avoid dummy-plugs, I know there is a software way to do this!
Ram: 8GB, Gskill Ripjaws 1600
I meant cgminer 3.0.1 in the title by the way.
Ram: 8GB, Gskill Ripjaws 1600
I meant cgminer 3.0.1 in the title by the way.
your ram size and brand ?
CGMiner and/or Windows may not recognize the device if nothing is plugged into it. Thankfully, you can either put some resistors into the port itself or make a dummy cable yourself (not hard).
http://www.techpowerup.com/forums/showthread.php?t=86507
http://soerennielsen.dk/mod/VGAdummy/index_en.php#1
Should have an adapter with any video card, and you can get a large amount of resistors from ebay for 99 cents (like I did a week ago).
http://www.techpowerup.com/forums/showthread.php?t=86507
http://soerennielsen.dk/mod/VGAdummy/index_en.php#1
Should have an adapter with any video card, and you can get a large amount of resistors from ebay for 99 cents (like I did a week ago).
Hey everyone. So I recently switched to mining BTC with cgminer from a year or so on phoenix 2.0 because of the built in overclocking and stratum support (whoo)
But I'm having some trouble getting it to start headless. I never was able to get phoenix to do this either but I've heard it's possible with cgminer.
Anways I've been using Windows 7 64-bit forever but if this is going to be a headache I can easily switch to Linux, I'm just wondering if anyone else has experienced cgminer getting stuck on "Started cgminer 3.1" until a display is attached, HDMI cable is plugged in, etc...
After that it starts up within 10-15 seconds but until then it just hangs there, maybe I can somehow specify the devices I have in the *.conf so cgminer doesn't have to wait until the AMD drivers report the cards as online? Just speculating, thanks in advance!
But I'm having some trouble getting it to start headless. I never was able to get phoenix to do this either but I've heard it's possible with cgminer.
Anways I've been using Windows 7 64-bit forever but if this is going to be a headache I can easily switch to Linux, I'm just wondering if anyone else has experienced cgminer getting stuck on "Started cgminer 3.1" until a display is attached, HDMI cable is plugged in, etc...
After that it starts up within 10-15 seconds but until then it just hangs there, maybe I can somehow specify the devices I have in the *.conf so cgminer doesn't have to wait until the AMD drivers report the cards as online? Just speculating, thanks in advance!
Jump to: