Cgminer 3.7.2 5 chip gridseed | Bitcointalksearch.org

mindbeast

newbie

Activity: 1

Merit: 0

I got 48 asics working last night on one Windows 7 mining rig. During the night 12 dropped off (on 2 hubs that were daisy chained). It was impossible to know which ones were disabled so I had to reboot the whole system.

I used cgwatcher to start cgminer and it gives you device details as well as all of the normal metrics - accepted, rejected, etc...

I used the zadig_2.1.0 to change the driver to WinUSB. Started cgminer and reset all of the hubs.

All of that was on a mining rig with 3x7970s as well. I was getting 20 Mhps on that rig.

I tried putting 8 asics on my personal pc and can't get more than 7 up. I am thinking my pc has a lot more software and driver changes than my mining rig which was designed only for AMD Catalyst software, cgminer and cgwatcher.

I cant wait for a version of cgminer that will see the devices on startup.

Good luck!

BTC: 1C2LTrgUUgnxhJLmx4vgjgQ8rGvfsmucXw

gamefixer

sr. member

Activity: 440

Merit: 250

Nice, gota try this tomorrow. I've only been able to get one to connect at a time so I went back to CPUminer. Grin

mindtrip

legendary

Activity: 1168

Merit: 1009

Hey guys I also got this to work today playing the same game as him plugging unplugging i couldn't get more then 2 working for a while
https://bitcointalk.org/index.php?topic=482352.new#new

I suppose we can get a patched version in the future to let us run 20+ minners on 1 PC then well have some serious power

If anyone needs any help with this let me know I have it down pat now

guyver

full member

Activity: 216

Merit: 100

14 that's great. Probably gonna mess around this evening to see if I can get 20 to work. As only 18 were showing up.

TrollboxChamp

sr. member

Activity: 462

Merit: 250

I was able to get 14 hashing like this. Sent you .01 makes up for some mining time lost. Grin

14 units were stable at 5.75-5.8mh Shocked

Back to CPUminer for now.

guyver

full member

Activity: 216

Merit: 100

Hopefully by then they can release a stable version as the developer had only one gridseed unit to test with.

TrollboxChamp

sr. member

Activity: 462

Merit: 250

Trying this out. Will send you a tip if it works

We still gotta figure out 20 tho...

I have 60 more of these on the way.

guyver

full member

Activity: 216

Merit: 100

Ok I have managed to get this working with 10 gridseeds
So follow the instructions from cryptomining-blog.com. About installing zdiag and download the miner software as well.

So edit the Ltconly batch file inside the cgminer gridseed folder. Open the file in notepad and we're it says --hotplug 0 change the 0 to 5.

Save changes.

Unplug your usb hub from your pc.
Run the Ltconly batch file.

Once the app connects to the pool. Plug in your usb hub
And software should pick up your miners.
Tested with 10 and works. Does not work with 20 miners.
I spent the whole day playing around and came out with this solution. Every time you restart the miner. You have to pull out the the usb hub. And run the batch file again and then plug the usb hub when connected to the pool

The software will crash if you try to run more than 2 miners with the the usb hub plugged in when launching the batch file.

Donations accepted btc:1AqQaCZ2gnaBNnGEwM39fyMi1KJ7mGSoCQ

Topic: Cgminer 3.7.2 5 chip gridseed (Read 1541 times)