Topic: CGMiner Litecoin GPU error (Read 7352 times)
i have already resolve this issue with put in cgminer lowest setting value.
i have the same error -5 with the same graphic card 7950, my driver is catalyst 13.1.
i try to use the comand with you resolve this problem but my card didn't work also. if somebody can help me. thanks.
i try to use the comand with you resolve this problem but my card didn't work also. if somebody can help me. thanks.
i am having the exact same problem with hd6950 can someone help me?
After a very helpful teamviewer session with WeTradeCoins, this is how this issue was resolved:
Go into MSI Afterburner, set the below settings:
Power limit +20
Core Clock 825
Memory Clock 1375
Then run with the following options:
--thread-concurrency 8192 -I 13 -g 2 -w 256
Currently ticking over at 498 KH/s so some more tweaking in order, but a good starting point!
Thanks all for the help
Go into MSI Afterburner, set the below settings:
Power limit +20
Core Clock 825
Memory Clock 1375
Then run with the following options:
--thread-concurrency 8192 -I 13 -g 2 -w 256
Currently ticking over at 498 KH/s so some more tweaking in order, but a good starting point!
Thanks all for the help
This is how I start my xfx 7950 in a mixed card machine. May be you can give it a try. The low core clock and memclock is for keeping it cool, so feel free to up them if that works or you.
Code:
./cgminer -o somepo.ol:3333 -u me -p x --scrypt -w256 --vectors 4 --shaders 1792 -I 13 --gpu-engine 800 --gpu-memclock=800
Install TeamViewer and pm me details of your machine. I will login and check for any issues if you wish. I will be online for the next 5 mins 
Thanks for the prompt replys, here are some answers:
Not using a riser cable so definitely not that, installed RAM is 3GB so I think this should be sufficient I only have the one card, and the PSU is a corsair CX600 that seems OK when running as a bitcoin miner
I've tried using registering for a new pool and I have the same issue. I've also tried using CGMiner versions 2.11.3 and 2.11.4 without any luck
Not using a riser cable so definitely not that, installed RAM is 3GB so I think this should be sufficient I only have the one card, and the PSU is a corsair CX600 that seems OK when running as a bitcoin miner
I've tried using registering for a new pool and I have the same issue. I've also tried using CGMiner versions 2.11.3 and 2.11.4 without any luck
have you tried with different pool/ older version of cgminer?
I'm using CGMiner 3.0.0 and a gigabyte HD 7950, on Windows 7 64 bit and Catalyst 13.1 drivers
I can mine bitcoin fine at decent speeds, however when trying to run CGMiner for Litecoin I am getting the error:
Error -5: Enqueueing kernal onto command queue
GPU 0 failure, disabling
This is the command I'm running that is causing the error, I did have extra flags in such as inensity and worksive, however I've stripped it back to the basics for testing purposes
cgminer --scrypt -u MyUsername -p MyPassword -o stratum+tcp://coinotron.com:3334
Has anyone ever seen this issue before?
I can mine bitcoin fine at decent speeds, however when trying to run CGMiner for Litecoin I am getting the error:
Error -5: Enqueueing kernal onto command queue
GPU 0 failure, disabling
This is the command I'm running that is causing the error, I did have extra flags in such as inensity and worksive, however I've stripped it back to the basics for testing purposes
cgminer --scrypt -u MyUsername -p MyPassword -o stratum+tcp://coinotron.com:3334
Has anyone ever seen this issue before?
Check the amount of ram installed.
Make sure your PSU is sufficient.
If using a riser cable, you probably need a powered one.
One (or more) of those usually do it for me.
I'm using CGMiner 3.0.0 and a gigabyte HD 7950, on Windows 7 64 bit and Catalyst 13.1 drivers
I can mine bitcoin fine at decent speeds, however when trying to run CGMiner for Litecoin I am getting the error:
Error -5: Enqueueing kernal onto command queue
GPU 0 failure, disabling
This is the command I'm running that is causing the error, I did have extra flags in such as inensity and worksive, however I've stripped it back to the basics for testing purposes
cgminer --scrypt -u MyUsername -p MyPassword -o stratum+tcp://coinotron.com:3334
Has anyone ever seen this issue before?
I can mine bitcoin fine at decent speeds, however when trying to run CGMiner for Litecoin I am getting the error:
Error -5: Enqueueing kernal onto command queue
GPU 0 failure, disabling
This is the command I'm running that is causing the error, I did have extra flags in such as inensity and worksive, however I've stripped it back to the basics for testing purposes
cgminer --scrypt -u MyUsername -p MyPassword -o stratum+tcp://coinotron.com:3334
Has anyone ever seen this issue before?
Jump to: