I understand 3.7.2 is the latest version that includes scrypt mining?
I've also tried 3.5.1 and 3.1.1, none of which seem to stop the issue. It's happening on multiple pools as well.
EDIT: I'm now using CGWatcher to restart the miner when the hang occurs. However, when it is restarted my voltages seem to reset. It kept the clock settings this time though and resumed mining at the expected hash rate.
It might also be relevant that when the new miner process appears, the temp and fan rpm monitor in CGMiner are missing.
Topic: Cgminer stratum disconnect hang issue (Read 1060 times)
the CGminer is outdated so upgrade it
Hi,
I'm having an issue with Cgminer where the stratum connection to the pool is reported as being interrupted and subsequently disconnected. The program then hangs at that point until I manually restart the miner (12 hours in the last case).
It also seems to be somehow disrupting my Afterburner config as the clocks mess up and voltages sometimes reset when the hang occurs. Temps are not an issue.
Set up:
Win 8.1 64 bit
Cgminer 3.7.2
MSI Afterburner 2.3.1
2x R9 280x - both set to 1080/1500 @ 1.125v using Afterburner
Cgminer screenshot:
http://s23.postimg.org/emuco9g3f/Cgminer_stratum_disconnect_hang_error.jpg
AB log showing clocks disruption on 2nd GPU at same time as hang:
http://postimg.org/image/4pjbv78hj/
Is this a known issue and are there any solution? I'd like to avoid CGWatcher if possible as it also likes to mess with my AB config.
Thanks!
EDIT: Second image didn't work - link here: http://s10.postimg.org/3rcm43ykn/msi_ab_log.jpg
I'm having an issue with Cgminer where the stratum connection to the pool is reported as being interrupted and subsequently disconnected. The program then hangs at that point until I manually restart the miner (12 hours in the last case).
It also seems to be somehow disrupting my Afterburner config as the clocks mess up and voltages sometimes reset when the hang occurs. Temps are not an issue.
Set up:
Win 8.1 64 bit
Cgminer 3.7.2
MSI Afterburner 2.3.1
2x R9 280x - both set to 1080/1500 @ 1.125v using Afterburner
Cgminer screenshot:
http://s23.postimg.org/emuco9g3f/Cgminer_stratum_disconnect_hang_error.jpg
AB log showing clocks disruption on 2nd GPU at same time as hang:
http://postimg.org/image/4pjbv78hj/
Is this a known issue and are there any solution? I'd like to avoid CGWatcher if possible as it also likes to mess with my AB config.
Thanks!
EDIT: Second image didn't work - link here: http://s10.postimg.org/3rcm43ykn/msi_ab_log.jpg
Jump to: