Is there anything in the CGWatcher log when this happens? (You may have to check "Show Debug Entries" in the Log tab to see everything). The miner always fails at re-enabling the GPU... at least from my experience. CGWatcher tries to watch for this happening and when it does, it will try to restart the GPU, which usually fixes the problem. If there is something preventing the GPU from restarting, it should be logged.
There is a short period of time that the GPU must return to the acceptable range before CGWatcher will restart it, so it will not happen instantly. Next time this happens, wait 5 to 10 minutes and if the GPU is not restarted, go to the Tests tab and click 'Create Debug Report'. Send that report to me via email (my email address is at the top of the readme).
Topic: CGMiner Thread disabled, re-enabled Problem Help Needed! (Read 914 times)
Hi all,
I have a very annoying problem with my Cgminer.
My enviroment: 2x Sapphire R9 280X Toxic
One of my gpu's gives a 800Kh/s and temp is ok. The other one has temp issues, it reaches my cut-off degree whic is 90C. When it reachs, cgminer disables the threads over this gpu and stops mining and doesn't start back. I use CGWatcher but doesn't help.
--auto-fan enabled
--auto-gpu enabled
Here is a screen shot. As you can see, only GPU1 goes on to digging. Any help appreciated! Thank you.
http://u1312.hizliresim.com/1j/v/vxj9p.jpg
I have a very annoying problem with my Cgminer.
My enviroment: 2x Sapphire R9 280X Toxic
One of my gpu's gives a 800Kh/s and temp is ok. The other one has temp issues, it reaches my cut-off degree whic is 90C. When it reachs, cgminer disables the threads over this gpu and stops mining and doesn't start back. I use CGWatcher but doesn't help.
--auto-fan enabled
--auto-gpu enabled
Here is a screen shot. As you can see, only GPU1 goes on to digging. Any help appreciated! Thank you.
http://u1312.hizliresim.com/1j/v/vxj9p.jpg
Jump to: