Topic: Check my rig (Read 1273 times)
hm so 1500w it is then, what about the slots issue? is the only way i could use the cheaper MB with a 1x to 16x adapter?
If you don't OC. Each card pulls 375watts. Make the calcs
He quite clearly said he WAS going to oc' the cards, so don't be a smartass, and even then, it probably wouldn't work, because 375*3 is roughly ~1150, and that doesn't leave any power for the rest of the system.
Gonna go ahead and say "no" that won't work.
legendary
Activity: 1862
Merit: 1011
Reverse engineer from time to time
If you don't OC. Each card pulls 375watts. Make the calcs
setting up a new rig and just wanna double check that its gonna work!
biggest concern is if the 1200w psu is gonna be enough to run the 3x69900 or if i should go with 1500w, gonna oc the cards and hopefully get close to 400mhash per gpu
and the motherboard only has 2pci 16x slots so last card will have to go in a 1x slot does that matter? or do i need to get an more expensive 3 16xslot mb?
will i run into any other problems with 6gpus?
3x HIS HD 6990 Fan 4GB DDR5 HIS 6990 Fan 4GB
RaidmaxX1200AE 1200W
Athlon ll X2 250
Gigabyte MA-880GA-UD3H or ASUS Crosshair IV Fomula
Nox Coolbay Devil Edition
G.SKILL DDR3 2GB NQ 1333(2GBx1)
biggest concern is if the 1200w psu is gonna be enough to run the 3x69900 or if i should go with 1500w, gonna oc the cards and hopefully get close to 400mhash per gpu
and the motherboard only has 2pci 16x slots so last card will have to go in a 1x slot does that matter? or do i need to get an more expensive 3 16xslot mb?
will i run into any other problems with 6gpus?
3x HIS HD 6990 Fan 4GB DDR5 HIS 6990 Fan 4GB
RaidmaxX1200AE 1200W
Athlon ll X2 250
Gigabyte MA-880GA-UD3H or ASUS Crosshair IV Fomula
Nox Coolbay Devil Edition
G.SKILL DDR3 2GB NQ 1333(2GBx1)
Jump to: