Author

Topic: Chip compatibility ? (Read 654 times)

newbie
Activity: 52
Merit: 0
January 14, 2014, 03:57:49 AM
#8
Moments later  Huh

What stops random chips from being swaped out?
Could it be because they would not pin out right?
If that's the case, can't you just mount onto a breadbaord and thenbrun wires/pins to the right/needed layout to make them work?

I know voltage might be an issue but that can get worked out.... so aside from volts any problems with that?

Sidehack: what type of hot air station do u use?
legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
November 27, 2013, 01:03:08 PM
#7
Well, they're exactly as overclockable as BEs out of the box. Which, yeah, is not at all. But in the OP you mentioned swapping chips, and that's not too different from the process of overclocking blades or BEs. It would have been pretty handy if they'd made the V2 tweakable just like the V1 though, for sure.
newbie
Activity: 52
Merit: 0
November 27, 2013, 12:56:45 PM
#6
Yea I saw your post with the add-ons.

 I was just speaking out of the box.
legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
November 27, 2013, 12:52:26 PM
#5
V2 Blades are overclockable, if you're able to do basic SMD soldering work.
newbie
Activity: 52
Merit: 0
November 27, 2013, 12:32:08 PM
#4
Yea But you can burn out your eruptor that way.
 Also depending on the blade you have that is overclockable or not. rev 2, green pcb. what i have, isnt. ;/
legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
November 27, 2013, 04:39:09 AM
#3
It's a little more intensive than just the oscillator, but not much. Blades are also overclockable using similar methods. For reference:

https://bitcointalksearch.org/topic/block-erupter-usb-overclocking-hacking-241652

https://bitcointalksearch.org/topic/new-version-unoverclockable-asicminer-blade-overclock-kit-in-stock-310752
legendary
Activity: 1358
Merit: 1003
Designer - Developer
November 27, 2013, 04:32:56 AM
#2
Not to my knowledge..

You can overclock the block erupters to around 440 MH/s if you replace one of the quartz oscillators on it though. Cheers!
newbie
Activity: 52
Merit: 0
November 27, 2013, 04:31:31 AM
#1
 Huh


 Are there any chips out there that are compatible with asicminer usb eruptors/blades that you could swap the chips out and increase your hashing rate?

 
Jump to: