I had a bad batch of risers (28/30 duds)
And I found once lurking on that rig still.
Swapped it out, still getting the error "AMD Topology bug detected, fix it" in claymore logs.
Its the only rig that is giving that error... weird.
Could be a dead card, as I have had 3 go out of 42 this past couple of weeks.
1 x DOA
1 x 1070 capacitor blew and leaked on to MB and also blew that!
1 x 480 with a bad temperature sensor gone
Topic: Claymore - AMD Toplology Bug detected - Fixes? (Read 165 times)
First of all, check all the cards then blame the driver or Claymore software.
Test the cards one by one until you will find the card with the problem.
It could be a faulty card that causing freezing or in some cases faulty psu.
Test the cards one by one until you will find the card with the problem.
It could be a faulty card that causing freezing or in some cases faulty psu.
Same drivers and hardware on multiple rigs, but one rig keeps giving this error in claymore logs.
Driver : 17.12.2
RX580
Win 10 - 1709
It has started freezing, so I'm trying to find if one card has gone wrong or this bug is causing the freezing
Any ideas?
Driver : 17.12.2
RX580
Win 10 - 1709
It has started freezing, so I'm trying to find if one card has gone wrong or this bug is causing the freezing
Any ideas?
Jump to: