Claymore Dual mining Question | Bitcointalksearch.org

JUPIE2008

newbie

Activity: 27

Merit: 0

Quote from: Ruz05 on December 22, 2017, 09:37:06 AM

After months of mining with Claymore (starting with 9.4) I noticed that the speed for each AMD RX580 fell down from 27.5 MH/s to 24.7 MH/s.
I tried newer versions (Claymore 10.0) or restarting the machine but it always mines with this 10% lower speed.

Hey Ruz05 i noticed on the new Radeon driver there is a setting where you can change the GPU from Graphics to Compute....... Is the new Radeon Driver better than the Mining driver suggested to use cause i have noticed the older driver do not have the option to change from Graphics to Compute.

For those not seen this its on Radeon Settings > Gaming > Global > Down the list GPU workload

Marvell2

full member

Activity: 1148

Merit: 132

Quote from: Cereberus on December 22, 2017, 09:52:56 AM

Rather than consuming a lot of energy even with modified bios , you can put that card to a really good use. Switch to Claymore GPU Cryptonight miner and you will hash at over 800 h/s per card with RX 580. Earnings will be the same and the energy consumption will be way lower, about 85-95 watt for a card.

eth makes more than cryptonite even with the incresed power use

xxcsu

hero member

Activity: 1498

Merit: 597

what is your batch file ? what -dcri value are you using ? try to decrease -dcri value ... start with 30 and try with lower numbers ( example -dcri 25 or -dcri 20 or -dcri 15 ).., till you find the "sweet spot"

Cereberus

legendary

Activity: 910

Merit: 1000

Rather than consuming a lot of energy even with modified bios , you can put that card to a really good use. Switch to Claymore GPU Cryptonight miner and you will hash at over 800 h/s per card with RX 580. Earnings will be the same and the energy consumption will be way lower, about 85-95 watt for a card.

Ruz05

jr. member

Activity: 59

Merit: 10

After months of mining with Claymore (starting with 9.4) I noticed that the speed for each AMD RX580 fell down from 27.5 MH/s to 24.7 MH/s.
I tried newer versions (Claymore 10.0) or restarting the machine but it always mines with this 10% lower speed.

os2sam

legendary

Activity: 3583

Merit: 1094

Think for yourself

https://bitcointalksearch.org/topic/m.6060876

JUPIE2008

newbie

Activity: 27

Merit: 0

Gooday all

I was wondering if somebody could put me on the right track. I installed the newest version of the claymore miner to dual mine Ether & siacoin.After creating the batch config on NANpool and after flashing the bios of the RX580 i get 20mh/s on ether and 620mh/s with Siacoin with dual running. If i single mine ether only then i get 30mh/s. Is that how its spose to be or am i doing something wrong.

Question is shud i be getting 29mh/s with siacoin running and if so what could i be doing wrong. Thx for the opportunity to as questions on here.

P.S am only using the one card atm ....waiting for delivery of 4 more.

regards

Jupie

Topic: Claymore Dual mining Question (Read 217 times)