Set -cvddc at 875 and remove -mvddc.
That's all you need.
That's all you need.
Wow, same speed, 3'C lower and 10W reduced.
No memory issues yet, I will test this all day.
Thank you MATHReX !
Topic: Claymore tweaking help (Read 237 times)
Wow, same speed, 3'C lower and 10W reduced.
No memory issues yet, I will test this all day.
Thank you MATHReX !
You have bad memory timings, with good ones you would be getting that speed at 2000 -2050 memory clock.
First you need good timings if you want decent speed at low clocks.
First you need good timings if you want decent speed at low clocks.
Set -cvddc at 875 and remove -mvddc.
That's all you need.
That's all you need.
to lower the consumption you will need to decrease -cvddc and -mvddc
Go reduce and check the amount of memory errors.
Go reduce and check the amount of memory errors.
Hello,
Im new to GPU mining and have since 2 days a single GPU.
Because out of stock, the other 3 GPU's are coming next week.
I got the RX 580 Nitro+ 8GB with Hynix memory.
I have flashed another BIOS on it with custom memory straps.
Now im dealing with something, electricity is expensive in my country so im trying to get the best tweaks for high mh/s and low wattage usage.
Settings 1:
I'm starting the miner without .bat, just with the config settings.
Msi afterburner
Core clock: 1100
Memory clock: 2210
(no other tweaks via afterburner)
Result 1:
Dual mining ETH + DCR
ETH: 29.6mh/s
DCR: 445mh/s
Wattage use (+ mobo, cpu, ssd etc.): 160W
Temp: 42 degrees celsius.
1 memory error in 12 hours
Now I saw some other people getting 30mh/s + and 800mh/s + with the same card so I googled and found a .bat file setting.
Settings 2:
Starting the miner with the .bat
Result 2:
Dual mining ETH + DCR
ETH: 30.3mh/s
DCR: 1000mh/s
Wattage use (+ mobo, cpu, ssd etc.): 210W
Temp: 48 degrees celsius.
sice 3 hours no memory errors.
Can anybody help me to lower wattage with a bit, but somehow keep the speed? And please be not so hard with me, I do not understand everything.
Thanks guys!
Im new to GPU mining and have since 2 days a single GPU.
Because out of stock, the other 3 GPU's are coming next week.
I got the RX 580 Nitro+ 8GB with Hynix memory.
I have flashed another BIOS on it with custom memory straps.
Now im dealing with something, electricity is expensive in my country so im trying to get the best tweaks for high mh/s and low wattage usage.
Settings 1:
I'm starting the miner without .bat, just with the config settings.
Msi afterburner
Core clock: 1100
Memory clock: 2210
(no other tweaks via afterburner)
Result 1:
Dual mining ETH + DCR
ETH: 29.6mh/s
DCR: 445mh/s
Wattage use (+ mobo, cpu, ssd etc.): 160W
Temp: 42 degrees celsius.
1 memory error in 12 hours
Now I saw some other people getting 30mh/s + and 800mh/s + with the same card so I googled and found a .bat file setting.
Settings 2:
Starting the miner with the .bat
Code:
-etha 0 -dcri 33 -r 300 -tstop 85 -tt 65 -cclock 1200 -mclock 2250 -cvddc 970 -mvddc 950
Result 2:
Dual mining ETH + DCR
ETH: 30.3mh/s
DCR: 1000mh/s
Wattage use (+ mobo, cpu, ssd etc.): 210W
Temp: 48 degrees celsius.
sice 3 hours no memory errors.
Can anybody help me to lower wattage with a bit, but somehow keep the speed? And please be not so hard with me, I do not understand everything.
Thanks guys!
Jump to: