I'm trying out btc mining with 2 HD 6970 cards. Using AMD Overdrive Control, I have set core at 880 max, memory at 125 max, power at 0.930 max and fan speed at a linear control (about 46xx RPM when mining), temperature around high 70s low 80s C and getting around 280 MHash/sec each with Phoenix miner 1.50 and the following command
280 is too low. I also have two stock 6970 cards (haven't gotten around to playing with Overdrive yet), and I'm getting 350MHs each. I'm using LinuxCoin and poclbm without any switches except to identify which card (I was getting same results with Windows 7 & GUIminer before I switched to Linux). 
Topic: clocking recommendations for 6970 (Read 1240 times)
Sorry, didn't read the post fully. I'm using GUI miner and just filling in the flag field. Not sure the flags you'd need then.
Check this out though, it's got lots of different options: https://en.bitcoin.it/wiki/Mining_hardware_comparison
Check this out though, it's got lots of different options: https://en.bitcoin.it/wiki/Mining_hardware_comparison
Did you need to change anything on the phoenix.py file? I kept getting
phoenix.py: error: no such option: -w
And if I take off -w128 -f0 I can unknown protocol error for -v
I'm using ./phoenix.py -u http://worker_name:[email protected]:8332/ -k -v -w128 -f0 poclbm DEVICE=0
phoenix.py: error: no such option: -w
And if I take off -w128 -f0 I can unknown protocol error for -v
I'm using ./phoenix.py -u http://worker_name:[email protected]:8332/ -k -v -w128 -f0 poclbm DEVICE=0
Flags: -v -w128 -f0
GPU: Max
Mem: 1.5x standard (put the slider in the middle)
Power: +5%
Fans: 65% (or whatever you're comfortable with. This keeps my one card at 72C and not too loud)
I get around 405 Mh/s with this. (on my one card)
GPU: Max
Mem: 1.5x standard (put the slider in the middle)
Power: +5%
Fans: 65% (or whatever you're comfortable with. This keeps my one card at 72C and not too loud)
I get around 405 Mh/s with this. (on my one card)
I'm trying out btc mining with 2 HD 6970 cards. Using AMD Overdrive Control, I have set core at 880 max, memory at 125 max, power at 0.930 max and fan speed at a linear control (about 46xx RPM when mining), temperature around high 70s low 80s C and getting around 280 MHash/sec each with Phoenix miner 1.50 and the following command
./phoenix.py -u http://worker_name:[email protected]:8332/ -k poclbm DEVICE=0
./phoenix.py -u http://worker_name:[email protected]:8332/ -k poclbm DEVICE=1
1) Any clocking recommendations using AMD Overdrive Control??
2) Any flag recommendations to the command?
thanks.
./phoenix.py -u http://worker_name:[email protected]:8332/ -k poclbm DEVICE=0
./phoenix.py -u http://worker_name:[email protected]:8332/ -k poclbm DEVICE=1
1) Any clocking recommendations using AMD Overdrive Control??
2) Any flag recommendations to the command?
thanks.
Jump to: