Still offering refunds at 105% of what you paid for international orders. If i get these, ship them, and the next day the price drops... there will be no compensation as a refund was offered. Thanks for your understanding in delay of remaining orders being delivered.
Just in case anyone missed this. PM me to request your refund. Thanks. 
Topic: [CLOSED] Group Buy #12 NEW Blade Miners 4 BTC or less! USA Orders Only Please! (Read 12760 times)
September 12, 2013, 11:42:21 AM
September 11, 2013, 10:51:12 PM
Still offering refunds at 105% of what you paid for international orders. If i get these, ship them, and the next day the price drops... there will be no compensation as a refund was offered. Thanks for your understanding in delay of remaining orders being delivered.
September 11, 2013, 11:51:25 AM
9/11/13 All Blades in hand shipped with tracking numbers. INTERNATIONAL ORDERS please send me a refund request on any blades/miners ordered as I am refunding ALL INTERNATIONAL blade orders at a rate of 105% of what you paid for the delay and non delivery(As I patiently wait for them to show up someday 
). USA orders on blades can request a refund if you did not get a tracking number today. USA blade orders were PMed today if yours did not ship yet. MANY USB Miners have shipped today with tracking numbers being sent around 12 AM tonight/early morning. I still have inventory at the 0.13 promo rate but inventory is going fast! Thank you for your many orders and continued support
). USA orders on blades can request a refund if you did not get a tracking number today. USA blade orders were PMed today if yours did not ship yet. MANY USB Miners have shipped today with tracking numbers being sent around 12 AM tonight/early morning. I still have inventory at the 0.13 promo rate but inventory is going fast! Thank you for your many orders and continued support September 10, 2013, 10:59:10 AM
9/10/13 UPDATE I am REFUNDING IN FULL + 5% for the delay ALL INTERNATIONAL/CANADIAN orders as I don't know when my 60+ Miners stuck in CHINA customs will arrive. I am shipping out orders today of what I have received so far with tracking numbers being sent tonight to those that shipped. ANY US orders that wish to receive a refund + 5% must wait until tomorrow evening as your order may have shipped today.This is not what I wanted to do but with 60+ blades delayed and may only arrive next week, I have no choice. When I receive the blades in customs hell 
, I will sell them for shipping to USA addresses at whatever my going price is at that time plus shipping.
ALL INTERNATIONAL/CANADIAN orders can request the refund by sending a PM to me with the total you paid for any blades and USB Miners purchased. Refunds will be sent in 24-72 hours as time permits.
, I will sell them for shipping to USA addresses at whatever my going price is at that time plus shipping.ALL INTERNATIONAL/CANADIAN orders can request the refund by sending a PM to me with the total you paid for any blades and USB Miners purchased. Refunds will be sent in 24-72 hours as time permits.
September 10, 2013, 06:10:19 AM
So China strikes again huh? I wonder when we learn to stop doing business with them.
When the work can be done for the same fraction of the price here in America.
So never.
September 09, 2013, 03:59:54 PM
So China strikes again huh? I wonder when we learn to stop doing business with them.
September 09, 2013, 02:48:38 PM
9/9/13 Some blades arrived today. They will ship by tomorrow and include one or more FREE USB Miners due to the delay. If you get a tracking number in the next 24 hours, your blades shipped. If not, your orders are coming in the next few days.
Yay
I hope one of those is mine
September 09, 2013, 10:50:08 AM
9/9/13 Some blades arrived today. They will ship by tomorrow and include one or more FREE USB Miners due to the delay. If you get a tracking number in the next 24 hours, your blades shipped. If not, your orders are coming in the next few days.
September 08, 2013, 10:16:53 PM
Any plans to reopen UK / international sales? Purchased 14 from you at the start and would love to get some more...
No. I am only shipping orders to USA addresses. Thank you for the question. September 08, 2013, 10:13:26 PM
9/8/13 Late night update. No more blade orders are being taken as AsicMiner is out of blades for at least a week. Any orders placed before now will be fulfilled.
September 08, 2013, 09:55:07 PM
Any plans to reopen UK / international sales? Purchased 14 from you at the start and would love to get some more...
September 08, 2013, 09:50:47 PM
Do you anticipate the blades dropping anytime soon?
No. Thanks for the question. September 08, 2013, 08:13:53 PM
Do you anticipate the blades dropping anytime soon?
September 08, 2013, 05:09:35 PM
9/8/13 All USB Miners are now 0.16 BTC each or less from me as I have these in stock for immediate shipping. Thanks for all orders placed with me.
September 08, 2013, 10:22:35 AM
9/8/13 First Blade Orders are stuck in customs clearance in China. I have requested a trace from FedEx and offered to give any information to get them cleared. I also have asked friedcat via PM if anything can be done on their end. I have 3 more orders shipped AFTER the first one sent the same way that are scheduled to arrive Monday and Tuesday. Other orders should arrive later this week. No compensation was offered as the main delay appears to be customs in China(just my luck once again). I will do what I can to make things right the best I can. Depending on any delay, I will include extra USB Miners in orders as my out of pocket expense. I would offer refunds but the BTC was already paid and the product is on the way. My sincere apologies to you my customers.
September 07, 2013, 09:31:33 AM
I want 1 ASIC blade when you will have it from friendcat
Any new orders should be received in 7 days or less by me and reshipped within 24 hours. I do have a few extra on the way that may ship sooner but no guarantees. Thanks for any order placed! Have a great weekend! 
September 07, 2013, 04:56:02 AM
I want 1 ASIC blade when you will have it from friendcat
September 06, 2013, 09:54:47 PM
9/6/13 Afternoon Update. Blade Orders. My Blade orders were not shipped until Wednesday and Thursday of this week from AsicMiner. I placed orders on 8/28, 8/29, 8/30, 9/1, 9/2 and so on. I have sent friedcat a PM to see if he can offer any form of compensation as initial orders were promised to ship on Monday at the latest. CanaryInTheMine received his on Thursday so I must assume his initial orders were shipped by Monday at the latest. Why mine were not shipped by Monday at the latest, I don't have an answer until friedcat responds to my PM. Thanks. SilentSonicBoom
I sent you my order on the 2nd, was it shipped with the rest since they shipped late or will I be receiving mine at a later date?
September 06, 2013, 08:35:02 PM
Why mine were not shipped by Monday at the latest, I don't have an answer until friedcat responds to my PM. Thanks. SilentSonicBoom
I think I can help answer that.
A) I decided to order from you
B) Fate enjoys kicking me in the balls
I'm very sorry to everyone else that has been affected by my purchasing decision.
September 06, 2013, 07:38:26 PM
9/6/13 Afternoon Update. Blade Orders. My Blade orders were not shipped until Wednesday and Thursday of this week from AsicMiner. I placed orders on 8/28, 8/29, 8/30, 9/1, 9/2 and so on. I have sent friedcat a PM to see if he can offer any form of compensation as initial orders were promised to ship on Monday at the latest. CanaryInTheMine received his on Thursday so I must assume his initial orders were shipped by Monday at the latest. Why mine were not shipped by Monday at the latest, I don't have an answer until friedcat responds to my PM. Thanks. SilentSonicBoom
I sent you my order on the 2nd, was it shipped with the rest since they shipped late or will I be receiving mine at a later date?
September 06, 2013, 03:32:58 PM
9/6/13 Afternoon Update. Blade Orders. My Blade orders were not shipped until Wednesday and Thursday of this week from AsicMiner. I placed orders on 8/28, 8/29, 8/30, 9/1, 9/2 and so on. I have sent friedcat a PM to see if he can offer any form of compensation as initial orders were promised to ship on Monday at the latest. CanaryInTheMine received his on Thursday so I must assume his initial orders were shipped by Monday at the latest. Why mine were not shipped by Monday at the latest, I don't have an answer until friedcat responds to my PM. Thanks. SilentSonicBoom
September 06, 2013, 12:20:57 PM
9/6/13 USB Miners are available for immediate shipment in 24 hours or less(some orders ship same day). No blades arrived today but several shipments arrive early next week. FedEx called three times for three different shipments confused to what was in them They are on the way. More blades for recently placed orders are arriving middle of next week sometime.
They are on the way. More blades for recently placed orders are arriving middle of next week sometime. September 05, 2013, 12:58:24 PM
I've being talking to you for almost a week to make the purchase and I just finished collecting the btc for express shipping to Argentina. Can you please accept my order? I can pay right away.
September 05, 2013, 09:45:04 AM
Following
September 05, 2013, 09:34:01 AM
9/5/13 All remaining USB Miner orders should ship today/tomorrow. I am now taking orders for USB Miners that should ship this Friday, Saturday, or Sunday that I have in hand right now.
September 04, 2013, 04:32:20 PM
9/4/13 Effective immediately, no more NEW INTERNATIONAL/CANADA orders will be taken as I don't have the extra time in the coming weeks to handle these orders. USA orders will still be taken. Some USB Miner orders have shipped today with tracking numbers coming late tonight/early morning. Thank you.
September 04, 2013, 04:23:32 PM
what kind of normal psu connector the blade takes?
Is it the gpu connector or the molex?
Thanks
Is it the gpu connector or the molex?
Thanks
September 04, 2013, 03:50:12 PM
77% diff increase every month for a year is way, way beyond the realm of possibility. You should really consider using MM.
MM?
Also, is there a walkthrough on the setup including what kind of power adapter needed?
Also, if you put in september it's a bit profitable
September 04, 2013, 02:45:31 PM
Payment and Shipping address has been sent to you for 4 blades. Can't wait to open my box of goodies!!!
September 04, 2013, 02:07:22 PM
77% diff increase every month for a year is way, way beyond the realm of possibility. You should really consider using MM.
MM?
Also, is there a walkthrough on the setup including what kind of power adapter needed?
September 04, 2013, 01:51:16 PM
77% diff increase every month for a year is way, way beyond the realm of possibility. You should really consider using MM.
September 04, 2013, 01:01:36 PM
September 04, 2013, 06:49:22 AM
Hi SSB!!!
Any shipment to EU?!
thx & cheers!
Any shipment to EU?!
thx & cheers!
September 03, 2013, 09:57:21 PM
Sorry if I missed instructions on this part but is it possible to purchase the back-plane in this group buy? Since the manufacturer sends one per 10 blades, is it possible to buy it separately?
I also want to know how to obtain backplane for the four blades I have on order. thx
I'm sure he is working on finding out about backplane and more.
As far as connections it looks like we will be able to power them like old ones just from glance. Might read over setting up old blade, there is a thread with great instructions including power. That will at least get you up and running. (That is just a guess from looking again, I'm sure we will know more as it seems each day more info comes out
) September 03, 2013, 09:39:11 PM
Sorry if I missed instructions on this part but is it possible to purchase the back-plane in this group buy? Since the manufacturer sends one per 10 blades, is it possible to buy it separately?
I also want to know how to obtain backplane for the four blades I have on order. thx
September 03, 2013, 09:17:35 PM
What would the price for 4 blades and shipping be to Atlanta GA? thanks
September 03, 2013, 03:46:24 PM
9/3/13 All PMs up to now should have received a response. Some USB miners have arrived today, more are coming this week. Some blades MAY be here Friday for Saturday shipment. I am going to be very busy for next 4 days packing and shipping orders. Tracking numbers will be sent within 24 hours of me shipping. If you don't have a tracking number, your order has not shipped in the past 24 hours+. I will be slow to respond to PMs the next four days as shipping out orders is job #1. Any new orders placed will be ordered for you. New blade orders still take up to 7 days(may be sooner) for me to receive plus 24 hours to reship. NEW USB orders MAY ship slightly sooner in the next 5 days or so. Thank you for your continued support!
September 03, 2013, 03:39:32 PM
Sorry if I missed instructions on this part but is it possible to purchase the back-plane in this group buy? Since the manufacturer sends one per 10 blades, is it possible to buy it separately?
I also want to know how to obtain backplane for the four blades I have on order. thx
September 03, 2013, 03:39:06 PM
I want to get some of these, hoping the price comes down more though.
No chance of paypal eh? Even from a provable reputable commercial account?
Only btc. No chance of paypal eh? Even from a provable reputable commercial account?
September 03, 2013, 03:38:45 PM
Sorry ! As I pm'ed you, I want the refund. I contacted Asicminer and they said they can sell blades direct to me with 0 fee shipping ! They're from China and I'm from Vietnam (the country in the south of China) and that will be faster !
Sorry again ! I didn't know that because Friedcat has just post this "https://bitcointalksearch.org/topic/block-erupter-blade-new-modellow-price-limited-quantity-286486" yesterday.
I hope you will refund to me. The address is: 1EdnG7pJJqzPazk76hTaxpNUwZ4R7JY4TP
PM sent. Sorry again ! I didn't know that because Friedcat has just post this "https://bitcointalksearch.org/topic/block-erupter-blade-new-modellow-price-limited-quantity-286486" yesterday.
I hope you will refund to me. The address is: 1EdnG7pJJqzPazk76hTaxpNUwZ4R7JY4TP
September 03, 2013, 03:38:32 PM
Sorry if I missed instructions on this part but is it possible to purchase the back-plane in this group buy? Since the manufacturer sends one per 10 blades, is it possible to buy it separately?
Not to my knowledge separately. Only receive if you buy 10 at one time. September 03, 2013, 12:16:52 PM
Sorry if I missed instructions on this part but is it possible to purchase the back-plane in this group buy? Since the manufacturer sends one per 10 blades, is it possible to buy it separately?
I also want to know how to obtain backplane for the four blades I have on order. thx
September 03, 2013, 11:03:00 AM
I want to get some of these, hoping the price comes down more though.
No chance of paypal eh? Even from a provable reputable commercial account?
No chance of paypal eh? Even from a provable reputable commercial account?
September 03, 2013, 09:05:18 AM
Sorry ! As I pm'ed you, I want the refund. I contacted Asicminer and they said they can sell blades direct to me with 0 fee shipping ! They're from China and I'm from Vietnam (the country in the south of China) and that will be faster !
Sorry again ! I didn't know that because Friedcat has just post this "https://bitcointalksearch.org/topic/block-erupter-blade-new-modellow-price-limited-quantity-286486" yesterday.
I hope you will refund to me. The address is: 1EdnG7pJJqzPazk76hTaxpNUwZ4R7JY4TP
Sorry again ! I didn't know that because Friedcat has just post this "https://bitcointalksearch.org/topic/block-erupter-blade-new-modellow-price-limited-quantity-286486" yesterday.
I hope you will refund to me. The address is: 1EdnG7pJJqzPazk76hTaxpNUwZ4R7JY4TP
September 03, 2013, 08:54:29 AM
Sorry if I missed instructions on this part but is it possible to purchase the back-plane in this group buy? Since the manufacturer sends one per 10 blades, is it possible to buy it separately?
September 03, 2013, 04:39:22 AM
Thanks for info!
So Ethernet is build-in, this is great
So Ethernet is build-in, this is great
September 02, 2013, 07:00:37 PM
September 02, 2013, 06:46:48 PM
I just ordered one. I hope it has network adapter and not just usb. lol
September 02, 2013, 02:22:29 PM
It's my first time with blades.
Just remember, no running with them....
I will have to learn how to stop.
Addictive hobby !
September 02, 2013, 10:25:55 AM
It's my first time with blades.
Just remember, no running with them....
September 02, 2013, 10:07:37 AM
Got mine reserved too!
Hope they are great. It's my first time with blades.
Hope they are great. It's my first time with blades.
September 01, 2013, 06:18:40 PM
So any word on the powersupply? Everything I've looked up concerning the blade's power shows how to hook it up using a atx PSU and the green connector. I would like to know about this mysterious "gold finger" connector and it's powersuppy. It sounds like it comes with one now and I just want a confirmation if I need to buy a ATX PSU or not.
GooolllldFiiiinggeeeerrrrrr......!
September 01, 2013, 05:34:20 PM
So any word on the powersupply? Everything I've looked up concerning the blade's power shows how to hook it up using a atx PSU and the green connector. I would like to know about this mysterious "gold finger" connector and it's powersuppy. It sounds like it comes with one now and I just want a confirmation if I need to buy a ATX PSU or not.
August 31, 2013, 05:58:15 AM
!!!reserverd!!! 
August 31, 2013, 03:42:35 AM
Have a good weekend! You might want to buy your wife something nice before next week lol. I hear ladies like something shiny...... it was either usb miners or diamonds.
usb miners...definitely usb miners
August 31, 2013, 12:40:17 AM
8/30/13 Thanks for all the compliments,orders,etc. Please continue placing orders. I will be trying to take a well deserved break the next three days to prepare for an exodus of miners next week from me to you my valued customers. I will not be answering any PMs for the next three days but do have a portable wallet with me to continue placing orders daily with AsicMiner. I have multiple orders scheduled to arrive Tuesday/Wednesday/Thursday this coming week. PMs being answered next week will slow to a crawl as well. My priority is to ship out orders and tracking numbers. To this effect, I have taken off work next Tuesday-Friday to send orders out. I am a one man crew as my help(son) went back to college and the wife has about had it with miners I will be back at this in full force all of next week as I have been every week. My goal for the month of September is to sell 10000 USB Miners and as many blades as possible. Thank you for your help in achieving my goals. Have a great weekend wherever you are and remember Monday in the US is labor day(holiday).
I will be back at this in full force all of next week as I have been every week. My goal for the month of September is to sell 10000 USB Miners and as many blades as possible. Thank you for your help in achieving my goals. Have a great weekend wherever you are and remember Monday in the US is labor day(holiday). Have a good weekend! You might want to buy your wife something nice before next week lol. I hear ladies like something shiny...... it was either usb miners or diamonds.
August 30, 2013, 09:05:40 PM
8/30/13 Thanks for all the compliments,orders,etc. Please continue placing orders. I will be trying to take a well deserved break the next three days to prepare for an exodus of miners next week from me to you my valued customers. I will not be answering any PMs for the next three days but do have a portable wallet with me to continue placing orders daily with AsicMiner. I have multiple orders scheduled to arrive Tuesday/Wednesday/Thursday this coming week. PMs being answered next week will slow to a crawl as well. My priority is to ship out orders and tracking numbers. To this effect, I have taken off work next Tuesday-Friday to send orders out. I am a one man crew as my help(son) went back to college and the wife has about had it with miners I will be back at this in full force all of next week as I have been every week. My goal for the month of September is to sell 10000 USB Miners and as many blades as possible. Thank you for your help in achieving my goals. Have a great weekend wherever you are and remember Monday in the US is labor day(holiday).
I will be back at this in full force all of next week as I have been every week. My goal for the month of September is to sell 10000 USB Miners and as many blades as possible. Thank you for your help in achieving my goals. Have a great weekend wherever you are and remember Monday in the US is labor day(holiday). August 30, 2013, 04:42:07 PM
If they are anything like the last blade a 750 watt is not going to cut it due to the 10 amp current each blade pulls. You will be lucky to get 4-5 working stable.
10 amp * 12v = 120w.You are saying these will only do 11w / GH/s?
These do 7w/GH...
August 30, 2013, 04:23:51 PM
If they are anything like the last blade a 750 watt is not going to cut it due to the 10 amp current each blade pulls. You will be lucky to get 4-5 working stable.
10 amp * 12v = 120w.You are saying these will only do 11w / GH/s?
August 30, 2013, 03:56:09 PM
Ordered 1 and sent payment.
August 30, 2013, 09:34:47 AM
If they are anything like the last blade a 750 watt is not going to cut it due to the 10 amp current each blade pulls. You will be lucky to get 4-5 working stable.
August 30, 2013, 07:34:29 AM
Ordered 2 blades.
Details in PM.
Details in PM.
August 30, 2013, 05:08:57 AM
Great news guys for those people who ordered blades at over 10btc
I got an email from friedcat sales team.
And they will be doing a rebate with new boards.
Details to be announced to the suppliers in September.
Which is in a few days
I got an email from friedcat sales team.
And they will be doing a rebate with new boards.
Details to be announced to the suppliers in September.
Which is in a few days
August 29, 2013, 09:42:47 PM
11.7 btc sent ! (for 3 blades)
Shipping address:
Number of blades: 3
Type of shipping: USPS Express Priority Mail International Shipping
Shipping address:
Number of blades: 3
Type of shipping: USPS Express Priority Mail International Shipping
August 29, 2013, 05:09:45 PM
If I buy 1 blade I will pay 4 btc and 0.60 btc for USPS Express Priority Mail International Shipping. Is it right ?
No.0.80 btc per 3 blades, 0.35 btc for each additional 1-3 blades USPS Priority Mail International Shipping Limited Tracking - 6 to 10 average business day delivery to major destinations.
1.20 btc per 3 blades, 0.60 btc for each additional 1-3 blades USPS Express Priority Mail International Shipping Limited Tracking - 3 to 5 average business day delivery to major destinations.
It is 1.20 btc for the first 3 blades.
August 29, 2013, 05:04:43 PM
All orders must pay shipping. There is no free shipping option. Thank you!
August 29, 2013, 01:37:36 PM
dont think they will be plug and play, but if you have mined before it should be pretty straightforward.
August 29, 2013, 01:35:59 PM
Dont know if you guys saw canarys group buy, but he says these new ones are not oc'able and have a USB connection(not sure if that means no ethernet connection or not)
Hopefully they will have both connections on them. Power consumption has a lower value so these are more efficient, I'm guessing 65nm? IMO the power savings are negligible right now since you can still OC the old blade and get a couple extra G\hash per device and be mining with it tomorrow. The new blades will make BTC longer however since it will take longer to reach the point where the cost of power is greater than the return.
Power consumption is the same... old blade @ 10GH is around 75watts or so, new one is 7w/GH so... 70watts @ 10GH .. roughly the same =P
August 29, 2013, 12:15:20 PM
Bump for SSB. I'm sure he will give us more info as soon as he receives it.
You could trust SSB with your sister. Feel free to use that as a customer testimonial lol.
You could trust SSB with your sister
. Feel free to use that as a customer testimonial lol. 
August 29, 2013, 11:29:41 AM
what about long pool 
rj45 or USB ?
rj45 or USB ?
August 29, 2013, 11:11:40 AM
Dont know if you guys saw canarys group buy, but he says these new ones are not oc'able and have a USB connection(not sure if that means no ethernet connection or not)
Hopefully they will have both connections on them. Power consumption has a lower value so these are more efficient, I'm guessing 65nm? IMO the power savings are negligible right now since you can still OC the old blade and get a couple extra G\hash per device and be mining with it tomorrow. The new blades will make BTC longer however since it will take longer to reach the point where the cost of power is greater than the return.
Power consumption is the same... old blade @ 10GH is around 75watts or so, new one is 7w/GH so... 70watts @ 10GH .. roughly the same =P
August 29, 2013, 10:34:23 AM
Dont know if you guys saw canarys group buy, but he says these new ones are not oc'able and have a USB connection(not sure if that means no ethernet connection or not)
Hopefully they will have both connections on them. Power consumption has a lower value so these are more efficient, I'm guessing 65nm? IMO the power savings are negligible right now since you can still OC the old blade and get a couple extra G\hash per device and be mining with it tomorrow. The new blades will make BTC longer however since it will take longer to reach the point where the cost of power is greater than the return.
August 29, 2013, 10:26:43 AM
If I buy 1 blade I will pay 4 btc and 0.60 btc for USPS Express Priority Mail International Shipping. Is it right ?
August 29, 2013, 09:46:37 AM
Dont know if you guys saw canarys group buy, but he says these new ones are not oc'able and have a USB connection(not sure if that means no ethernet connection or not)
August 29, 2013, 08:53:26 AM
8/29/13 AsicMiner is to ship New Blade Miners on Monday at the latest. They should arrive in 7 days or less to me(Possibly Friday September 6th from FedEx) ,then I reship within 24 hours of my receiving your order from AsicMiner.
August 29, 2013, 08:29:19 AM
Hi I am interested but I want to know more.
Do the blades have everything needed to run 'out of the box' ?
Or is additional hardware needed, such as backplane, PSU, cabling, etc?
Are they self sufficient, or do you need to run/manage them from a PC?
Thanks
Do the blades have everything needed to run 'out of the box' ?
Or is additional hardware needed, such as backplane, PSU, cabling, etc?
Are they self sufficient, or do you need to run/manage them from a PC?
Thanks
August 29, 2013, 07:48:08 AM
In addition to those questions above clearing up technical specs can you ask about what these can stably be overclocked to and if it is the same process as the "old" Blades?
August 29, 2013, 02:56:31 AM
SSB,
The price starts to become attractive.
Can you provide more info about what is provided and missing
PSU requirements. Fans?
When you say backplanes with 10 slots, is it the rack that you can populate 10 blades in it?
or you mean the blades posses backplane connectors?
this part isn't clear.
thanks,
The only info I have received is posted. I will try to get answers to these questions. Thanks for asking. The price starts to become attractive.
Can you provide more info about what is provided and missing
PSU requirements. Fans?
When you say backplanes with 10 slots, is it the rack that you can populate 10 blades in it?
or you mean the blades posses backplane connectors?
this part isn't clear.
thanks,
August 29, 2013, 02:55:29 AM
Do these have ethernet connections like the last ones? Considering purchasing, just need some additional details on the hardware.
I as well would love to know this.. LOVE how the old blades run on their own, it would be cumbersome to have to string raspberry pi's all over the place for USB
August 28, 2013, 11:55:49 PM
New meaning the new hardware or more of the same old?
From power consumption #'s I would guess same old w/ cosmetic changes mostly... just like their new USB miners.
Im waiting for pix, instructions, all specs, etc... then will probably buy some =) woot
August 28, 2013, 11:49:59 PM
Do these have ethernet connections like the last ones? Considering purchasing, just need some additional details on the hardware.
August 28, 2013, 11:48:12 PM
SSB,
The price starts to become attractive.
Can you provide more info about what is provided and missing
PSU requirements. Fans?
When you say backplanes with 10 slots, is it the rack that you can populate 10 blades in it?
or you mean the blades posses backplane connectors?
this part isn't clear.
thanks,
The price starts to become attractive.
Can you provide more info about what is provided and missing
PSU requirements. Fans?
When you say backplanes with 10 slots, is it the rack that you can populate 10 blades in it?
or you mean the blades posses backplane connectors?
this part isn't clear.
thanks,
August 28, 2013, 11:13:56 PM
New prices are up! Thank you for your orders!
August 28, 2013, 11:01:38 PM
Reserved
August 28, 2013, 10:45:14 PM
Reserved for off topic comment (whaaaat you know theres gonna be one might as well reserve it!)
August 28, 2013, 10:22:11 PM
NEW BLADE!
August 28, 2013, 10:07:48 PM
Reserved.
August 28, 2013, 10:04:45 PM
watching
August 28, 2013, 09:14:46 PM
details will be posted in next 4 hours
first come first served
first come first served
August 28, 2013, 02:21:46 PM
New meaning the new hardware or more of the same old?
August 28, 2013, 11:05:49 AM
Jump to: