Topic: CNC Coin P2Pool Setup - server only returning work with very low difficulty? (Read 960 times)
June 08, 2013, 09:55:49 PM
Support, very good.
May 26, 2013, 10:10:14 PM
Have you fixed it? Because I'm having the same Problem with luckyCoin here
May 05, 2013, 12:36:50 AM
I've setup P2Pool for CNC Coin from https://github.com/chrda/p2pool-chncoin (as referenced by blastbob in this thread https://bitcointalksearch.org/topic/anncncp2pool-blastbobs-unstable-p2pool-chncoin-servers-192907)
The P2Pool server is running fine as far as I can tell, its even connected to other peer nodes, however when I connect miners (cgminer) I always get very low difficulties (e.g. 1 to 4 in cgminer) and the web stats page of my P2Pool keeps showing 0 shares, e.g. the below is the output after running 200Kh/s against it for some time:
Web Stats Page of my P2Pool
Console Log of my P2Pool
Am I missing something in the P2Pool setup? I've tried passing difficulty by adding +0.00011641 to the CNC Address in cgminer, that seems to force difficulty however still Im not getting any shares accounted for on the P2Pool server.
When I connected my miner to blastbob's P2Pools from the above thread I seem to get difficulties like 2K or 4K (varies) and it seems to get some shares.
Thanks for any help with this!
The P2Pool server is running fine as far as I can tell, its even connected to other peer nodes, however when I connect miners (cgminer) I always get very low difficulties (e.g. 1 to 4 in cgminer) and the web stats page of my P2Pool keeps showing 0 shares, e.g. the below is the output after running 200Kh/s against it for some time:
Web Stats Page of my P2Pool
Code:
Version: 11.3-16-g104a596
Pool rate: 379MH/s (36% DOA+orphan) Share difficulty: 0.276
Node uptime: 0.036 days Peers: 2 out, 7 in
Local rate: 216kH/s (25% DOA) Expected time to share: 1.53 hours
Shares: 0 total (0 orphaned, 0 dead) Efficiency: ???
Pool rate: 379MH/s (36% DOA+orphan) Share difficulty: 0.276
Node uptime: 0.036 days Peers: 2 out, 7 in
Local rate: 216kH/s (25% DOA) Expected time to share: 1.53 hours
Shares: 0 total (0 orphaned, 0 dead) Efficiency: ???
Console Log of my P2Pool
Code:
2013-05-05 05:34:54.950016 New work for worker! Difficulty: 0.000116 Share difficulty: 0.272550 Total block value: 88.100000 CNC including 1 transactions
2013-05-05 05:34:54.954611 New work for worker! Difficulty: 0.000116 Share difficulty: 0.272550 Total block value: 88.000000 CNC including 0 transactions
2013-05-05 05:34:55.441221 P2Pool: 8709 shares in chain (8719 verified/8719 total) Peers: 9 (7 incoming)
2013-05-05 05:34:55.441368 Local: 217kH/s in last 10.0 minutes Local dead on arrival: ~26.8% (21-33%) Expected time to share: 1.5 hours
2013-05-05 05:34:55.441449 Shares: 0 (0 orphan, 0 dead) Stale rate: ??? Efficiency: ??? Current payout: 0.0000 CNC
2013-05-05 05:34:54.954611 New work for worker! Difficulty: 0.000116 Share difficulty: 0.272550 Total block value: 88.000000 CNC including 0 transactions
2013-05-05 05:34:55.441221 P2Pool: 8709 shares in chain (8719 verified/8719 total) Peers: 9 (7 incoming)
2013-05-05 05:34:55.441368 Local: 217kH/s in last 10.0 minutes Local dead on arrival: ~26.8% (21-33%) Expected time to share: 1.5 hours
2013-05-05 05:34:55.441449 Shares: 0 (0 orphan, 0 dead) Stale rate: ??? Efficiency: ??? Current payout: 0.0000 CNC
Am I missing something in the P2Pool setup? I've tried passing difficulty by adding +0.00011641 to the CNC Address in cgminer, that seems to force difficulty however still Im not getting any shares accounted for on the P2Pool server.
When I connected my miner to blastbob's P2Pools from the above thread I seem to get difficulties like 2K or 4K (varies) and it seems to get some shares.
Thanks for any help with this!
Jump to: